首页 > 代码库 > [转]caffe的配置过程
[转]caffe的配置过程
caffe的配置过程
转：http://blog.csdn.net/brightming/article/details/51106629
版权声明：本文为博主原创文章，欢迎转载！转载请写明原文链接出处！
这篇文章可参考：http://www.cnblogs.com/cj695/p/4498270.html
下载caffe
拷贝Make.config.example Make.config
修改Make.config 取消注释cpu-only，注释掉cuda相关的
-----------------安装依赖的库------------------------
参考docs/install_yum.md，执行：
yum install protobuf-devel leveldb-devel snappy-devel opencv-devel boost-devel hdf5-devel
实际上，hdf5-devel这个安装会找不到。
但是：yum install gflags-devel glog-devel lmdb-devel这个不成功，找不到。只能手动安装：
# glog
wget https://google-glog.googlecode.com/files/glog-0.3.3.tar.gz
tar zxvf glog-0.3.3.tar.gz
cd glog-0.3.3
./configure
make && make install
连不上 google-glog.googlecode.com
从这里下载：
http://download.csdn.net/download/chenguangxing3/6661667
安装glog。
./configure --preifx=mypath
make
make install
# gflags
wget https://github.com/schuhschuh/gflags/archive/master.zip
unzip master.zip
cd gflags-master
mkdir build && cd build
export CXXFLAGS="-fPIC" && cmake .. && make VERBOSE=1
make && make install
cmake的时候，提示版本不够，需要2.8.12或以上，我的是2.8.11
升级cmake：https://cmake.org/files/v3.4/cmake-3.4.3.tar.gz
./bootstrap
gmake
gmake install
再次安装gflags成功。
# lmdb
git clone https://github.com/LMDB/lmdb
cd lmdb/libraries/liblmdb
make && make install
安装成功。
安装atlas：
yum install atlas
安装python 开发包：
yum install python-devel
安装cython: http://cython.org/ 下载0.24版的
http://cython.org/release/Cython-0.24.zip
进入解压路径，python setup.py install
耗时3分钟左右。
安装numpy
http://nbtelecom.dl.sourceforge.net/project/numpy/NumPy/1.8.0/numpy-1.8.0.zip
耗时3分钟左右。
------------------------编译安装caffe--------------------------
参考：http://caffe.berkeleyvision.org/installation.html中的Compilation with Make部分。
cp Makefile.config.example Makefile.config
# Adjust Makefile.config (for example, if using Anaconda Python, or if cuDNN is desired)
make all
make test
make runtest
修改：
# NOTE: this is required only if you will compile the python interface.
# We need to be able to find Python.h and numpy/arrayobject.h.
PYTHON_INCLUDE := /usr/include/python2.7 \
/usr/lib/python2.7/dist-packages/numpy/core/include
为：（因为我的arrayobject.h在另外lib64的路径下）
PYTHON_INCLUDE := /usr/include/python2.7 \
/usr/lib64/python2.7/site-packages/numpy/core/include
修改：打开CPU_ONLY := 1,并注释掉：USE_CUDNN := 1。因为我的电脑没有gpu相关的东西。
其他的没改动。
报错：
CXX src/caffe/blob.cpp
In file included from ./include/caffe/blob.hpp:8:0,
from src/caffe/blob.cpp:4:
./include/caffe/common.hpp:6:26: fatal error: glog/logging.h: No such file or directory
#include <glog/logging.h>
因为没有装glog，所以再找办法装上先。
安装后继续编译，报错：
CXX src/caffe/blob.cpp
In file included from ./include/caffe/util/math_functions.hpp:11:0,
from src/caffe/blob.cpp:7:
./include/caffe/util/mkl_alternate.hpp:11:19: fatal error: cblas.h: No such file or directory
#include <cblas.h>
没有装cblas，参考：http://blog.csdn.net/cleverysm/article/details/1925549,http://www.linuxidc.com/Linux/2015-02/113169.htm
http://www.netlib.org/blas/blast-forum/cblas.tgz
具体：
1. 编译blas，进入BLAS目录执行下面的命令
gfortran -c -O3 *.f # 编译所有的 .f 文件，生成 .o文件
ar rv libblas.a *.o # 链接所有的 .o文件，生成 .a 文件
2. 编译cblas，进入CBLAS目录，首先根据自己的操作系统平台，将某个Makefiel.XXX复制为Makefile.in，XXX表示操作系统。如果是Linux，那么就将Makefile.LINUX 复制为 Makefile.in。
cp ../BLAS/libblas.a testing # 将上一步编译成功的 libblas.a 复制到 CBLAS目录下的testing子目录
make # 编译所有的目录
此时会在CBLAS安装目录下的lib目录中产生一个静态链接库文件cblas_LINUX.a，这个库文件和上面得到的libblas.a文件就是我们所需要的。另外还需要的就是CBLAS/include中的cblas.h头文件。将三个文件全部拷贝到，你需调用的应用程序源码目录中。
拷贝到路径下：
cp include/cblas.h /usr/include/
cp lib/cblas_LINUX.a /usr/local/libcblas.a
cp testing/libblas.a /usr/local/lib
再次编译，报错：
src/caffe/layers/hdf5_data_layer.cpp:13:18: fatal error: hdf5.h: No such file or directory
#include "hdf5.h"
记得上面已经安装了hdf5-devel，怎么会出这个错？查看一下，发现yum这个没找到hdf5-devel，所以也就没有安装。
在docs/installion.md中，建议：but we suggest first installing the [Anaconda](https://store.continuum.io/cshop/anaconda/) Python distribution, which provides most of the necessary packages, as well as the `hdf5` library dependency.
准备安装hdf5:
http://www.hdfgroup.org/ftp/HDF5/current/src/hdf5-1.8.16.tar
解压后：
./configure --prefix=/usr/local/hdf5-1.8.3 ##指定安装路径，否则会默认安装到当前路径下。
make ##4分钟左右
make install
此时，在Makefile.config中增加HDF5_DIRS的路径到搜索路径下：
HDF5_DIRS :=/usr/local/hdf5-1.8.3/
# Whatever else you find you need goes here.
INCLUDE_DIRS := $(PYTHON_INCLUDE) /usr/local/include $(HDF5_DIRS)/include
LIBRARY_DIRS := $(PYTHON_LIB) /usr/local/lib /usr/lib $(HDF5_DIRS)/lib
再次编译，报错：
In file included from src/caffe/util/db.cpp:2:0:
./include/caffe/util/db_leveldb.hpp:7:24: fatal error: leveldb/db.h: No such file or directory
#include "leveldb/db.h"
^
compilation terminated.
缺少了google的kv数据库：leveldb，这个在installation.md中的Optional dependencies也提到了。
从这里下载：https://github.com/google/leveldb
参考：https://techoverflow.net/blog/2012/12/14/compiling-installing-leveldb-on-linux/
解压后，make
因为没有不支持install，所以，要手工将这些include和生成的lib拷贝到需要的地方。
cp --preserve=links out-shared/libleveldb.so* /usr/local/lib #只拷贝了动态库。
cp -r include/leveldb/ /usr/local/include/
再次编译，报错：
CXX src/caffe/util/upgrade_proto.cpp
AR -o .build_release/lib/libcaffe.a
LD -o .build_release/lib/libcaffe.so.1.0.0-rc3
/usr/bin/ld: cannot find -lcblas
/usr/bin/ld: cannot find -latlas
collect2: error: ld returned 1 exit status
make: *** [.build_release/lib/libcaffe.so.1.0.0-rc3] Error 1
静态库的链接已经完成了，这个动态库缺少了东西。上面安装cblas的时候，发现确实是只产生了静态库，需要增加动态库。
进入到CBLAS目录下，将静态库转为动态库：
gcc -shared lib/cblas_LINUX.a testing/libblas.a -o libcblas.so
cp libcblas.so /usr/local/
再次编译，报错：
CXX src/caffe/util/upgrade_proto.cpp
AR -o .build_release/lib/libcaffe.a
LD -o .build_release/lib/libcaffe.so.1.0.0-rc3
/usr/bin/ld: cannot find -lcblas
/usr/bin/ld: cannot find -latlas
collect2: error: ld returned 1 exit status
mv /usr/local/libcblas.* /usr/local/lib/ #就是把它们转移到 /usr/local/lib下，否则还会报错
再次编译，报错：
LD -o .build_release/lib/libcaffe.so.1.0.0-rc3
/usr/bin/ld: cannot find -latlas
collect2: error: ld returned 1 exit status
make: *** [.build_release/lib/libcaffe.so.1.0.0-rc3] Error 1
之前有安装 yum install atlas
查看：
[root@localhost caffe-master]# ll /usr/lib64/atlas/
total 21304
lrwxrwxrwx. 1 root root 17 Apr 8 15:54 libsatlas.so.3 -> libsatlas.so.3.10
-rwxr-xr-x. 1 root root 10852104 Nov 20 13:43 libsatlas.so.3.10
lrwxrwxrwx. 1 root root 17 Apr 8 15:54 libtatlas.so.3 -> libtatlas.so.3.10
-rwxr-xr-x. 1 root root 10959464 Nov 20 13:43 libtatlas.so.3.10
再安装yum install atlas-devel，查看：
[root@localhost caffe-master]# ll /usr/lib64/atlas/
total 21304
lrwxrwxrwx. 1 root root 17 Apr 9 14:03 libsatlas.so -> libsatlas.so.3.10
lrwxrwxrwx. 1 root root 17 Apr 8 15:54 libsatlas.so.3 -> libsatlas.so.3.10
-rwxr-xr-x. 1 root root 10852104 Nov 20 13:43 libsatlas.so.3.10
lrwxrwxrwx. 1 root root 17 Apr 9 14:03 libtatlas.so -> libtatlas.so.3.10
lrwxrwxrwx. 1 root root 17 Apr 8 15:54 libtatlas.so.3 -> libtatlas.so.3.10
-rwxr-xr-x. 1 root root 10959464 Nov 20 13:43 libtatlas.so.3.10
参考：http://blog.sina.com.cn/s/blog_4c4668bb01013gsv.html
发现里面有说到：
在 3.10.0 的 ATLAS 中没有了 --with-netlib-lapack指定lapack_LINUX.a 只需要 --with-netlib-lapack-tarfile,给出下载的包就行，不需要自己在去编译 LAPACK了。但是最后生成的 库文件也给整合了，不是上面的6个，而是两个
libsatals.so libtatlas.so, 去 BUILD/lib 里面查看 Makefile， 可以看到确实被整合了的。为了依其上的软件能更通用，又不想自己去改Makefile的内容，就用老版本的组合了。
于是，我建立一个软链接：
ln -s /usr/lib64/atlas/libsatlas.so /usr/lib64/libatlas.so
（如果我建立在atlas下，即ln -s /usr/lib64/atlas/libsatlas.so /usr/lib64/atlas/libatlas.so 还是找不到，就把它提到外面来了）
再次编译，这次ok了。
[root@localhost caffe-master]# make all
LD -o .build_release/lib/libcaffe.so.1.0.0-rc3
CXX tools/caffe.cpp
CXX/LD -o .build_release/tools/caffe.bin
CXX tools/compute_image_mean.cpp
CXX/LD -o .build_release/tools/compute_image_mean.bin
CXX tools/convert_imageset.cpp
CXX/LD -o .build_release/tools/convert_imageset.bin
CXX tools/device_query.cpp
CXX/LD -o .build_release/tools/device_query.bin
CXX tools/extract_features.cpp
CXX/LD -o .build_release/tools/extract_features.bin
CXX tools/finetune_net.cpp
CXX/LD -o .build_release/tools/finetune_net.bin
CXX tools/net_speed_benchmark.cpp
CXX/LD -o .build_release/tools/net_speed_benchmark.bin
CXX tools/test_net.cpp
CXX/LD -o .build_release/tools/test_net.bin
CXX tools/train_net.cpp
CXX/LD -o .build_release/tools/train_net.bin
CXX tools/upgrade_net_proto_binary.cpp
CXX/LD -o .build_release/tools/upgrade_net_proto_binary.bin
CXX tools/upgrade_net_proto_text.cpp
CXX/LD -o .build_release/tools/upgrade_net_proto_text.bin
CXX tools/upgrade_solver_proto_text.cpp
CXX/LD -o .build_release/tools/upgrade_solver_proto_text.bin
CXX examples/cifar10/convert_cifar_data.cpp
CXX/LD -o .build_release/examples/cifar10/convert_cifar_data.bin
CXX examples/cpp_classification/classification.cpp
CXX/LD -o .build_release/examples/cpp_classification/classification.bin
CXX examples/mnist/convert_mnist_data.cpp
CXX/LD -o .build_release/examples/mnist/convert_mnist_data.bin
CXX examples/siamese/convert_mnist_siamese_data.cpp
CXX/LD -o .build_release/examples/siamese/convert_mnist_siamese_data.bin
[root@localhost caffe-master]#
接着是make test,没有问题，花费5分钟左右。
接着：make runtest，报错：
[root@localhost caffe-master]# make runtest
.build_release/tools/caffe
.build_release/tools/caffe: error while loading shared libraries: libglog.so.0: cannot open shared object file: No such file or directory
make: *** [runtest] Error 127
但是在/usr/local/lib下有阿？
[root@localhost glog-0.3.3]# ll /usr/local/lib
total 5532
drwxr-xr-x. 3 root root 19 Apr 8 16:32 cmake
-rwxr-xr-x. 1 root root 130336 Mar 25 10:59 default.sfx
-rw-r--r--. 1 root root 792216 Apr 8 17:17 libblas.a
-rw-r--r--. 1 root root 387232 Apr 8 17:16 libcblas.a
-rwxr-xr-x. 1 root root 7691 Apr 9 11:39 libcblas.so
-rw-r--r--. 1 root root 628106 Apr 8 16:31 libgflags.a
-rw-r--r--. 1 root root 627712 Apr 8 16:31 libgflags_nothreads.a
-rw-r--r--. 1 root root 352318 Apr 8 16:59 libglog.a
-rwxr-xr-x. 1 root root 958 Apr 8 16:59 libglog.la
lrwxrwxrwx. 1 root root 16 Apr 8 16:59 libglog.so -> libglog.so.0.0.0
lrwxrwxrwx. 1 root root 16 Apr 8 16:59 libglog.so.0 -> libglog.so.0.0.0
-rwxr-xr-x. 1 root root 524192 Apr 8 16:59 libglog.so.0.0.0
-rwxr-xr-x. 3 root root 413462 Apr 9 11:26 libleveldb.so
-rwxr-xr-x. 3 root root 413462 Apr 9 11:26 libleveldb.so.1
-rwxr-xr-x. 3 root root 413462 Apr 9 11:26 libleveldb.so.1.18
-rw-r--r--. 1 root root 644748 Apr 8 16:33 liblmdb.a
-rwxr-xr-x. 1 root root 304783 Apr 8 16:33 liblmdb.so
drwxr-xr-x. 2 root root 23 Apr 8 16:59 pkgconfig
临时解决方法：
export LD_LIBRARY_PATH=/usr/local/lib/
继续make runtest,报错：
[root@localhost caffe-master]# make runtest
.build_release/tools/caffe
.build_release/tools/caffe: error while loading shared libraries: libhdf5_hl.so.10: cannot open shared object file: No such file or directory
make: *** [runtest] Error 127
再来：export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/hdf5-1.8.3/lib
这次ok了：
[ RUN ] NeuronLayerTest/0.TestExpLayer
[ OK ] NeuronLayerTest/0.TestExpLayer (0 ms)
[ RUN ] NeuronLayerTest/0.TestExpGradientBase2Shift1
[ OK ] NeuronLayerTest/0.TestExpGradientBase2Shift1 (1 ms)
[ RUN ] NeuronLayerTest/0.TestLogLayerBase2
[ OK ] NeuronLayerTest/0.TestLogLayerBase2 (0 ms)
[ RUN ] NeuronLayerTest/0.TestLogGradientBase2Shift1Scale3
[ OK ] NeuronLayerTest/0.TestLogGradientBase2Shift1Scale3 (2 ms)
[----------] 48 tests from NeuronLayerTest/0 (175 ms total)
[----------] Global test environment tear-down
[==========] 1050 tests from 146 test cases ran. (34229 ms total)
[ PASSED ] 1050 tests.
但这个不是好的解决方法，我得永久修改这个链接路径才行。
方法：
查看 /etc/ld.so.conf
发现引用/etc/ld.so.conf.d/下的所有conf结尾的文件，进入里面
可以看到那个atlas的内容就一句话，指明了lib的路径：/usr/lib64/atlas
新建一个conf文件：/etc/ld.so.conf.d/glog.conf，里面写：/usr/local/lib
再新建一个conf文件：/etc/ld.so.conf.d/hdf5.conf，里面写：/usr/local/hdf5-1.8.3/lib
最后执行：
/sbin/ldconfig -v
这样，就不用再去搞那个LD_LIBRARY_PATH了。
重新执行一次完整流程：
make clean
make all #3分钟
make test #4分钟
make runtest #1分钟
make pycaffe #40秒
编译python的包：
[root@localhost caffe-master]# make pycaffe
CXX/LD -o python/caffe/_caffe.so python/caffe/_caffe.cpp
touch python/caffe/proto/__init__.py
PROTOC (python) src/caffe/proto/caffe.proto
[root@localhost caffe-master]#
编译好了python包后，要把这个模块加入到python的路径下：（参考安装说明：http://caffe.berkeleyvision.org/installation.html python部分）
export PYTHONPATH=/home/zzz/OpenSource/caffe-master/python:$PYTHONPATH
编辑/etc/profile，增加：
export PYTHONPATH=$PYTHONPATH:/home/zzz/OpenSource/caffe-master/python/
然后打开python，导入caffe:
[root@localhost caffe-master]# python
Python 2.7.5 (default, Nov 20 2015, 02:00:19)
[GCC 4.8.5 20150623 (Red Hat 4.8.5-4)] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import caffe
/home/zzz/OpenSource/caffe-master/python/caffe/pycaffe.py:13: RuntimeWarning: to-Python converter for boost::shared_ptr<caffe::Net<float> > already registered; second conversion method ignored.
from ._caffe import Net, SGDSolver, NesterovSolver, AdaGradSolver, \
/home/zzz/OpenSource/caffe-master/python/caffe/pycaffe.py:13: RuntimeWarning: to-Python converter for boost::shared_ptr<caffe::Blob<float> > already registered; second conversion method ignored.
from ._caffe import Net, SGDSolver, NesterovSolver, AdaGradSolver, \
/home/zzz/OpenSource/caffe-master/python/caffe/pycaffe.py:13: RuntimeWarning: to-Python converter for boost::shared_ptr<caffe::Solver<float> > already registered; second conversion method ignored.
from ._caffe import Net, SGDSolver, NesterovSolver, AdaGradSolver, \
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/home/zzz/OpenSource/caffe-master/python/caffe/__init__.py", line 1, in <module>
from .pycaffe import Net, SGDSolver, NesterovSolver, AdaGradSolver, RMSPropSolver, AdaDeltaSolver, AdamSolver
File "/home/zzz/OpenSource/caffe-master/python/caffe/pycaffe.py", line 15, in <module>
import caffe.io
File "/home/zzz/OpenSource/caffe-master/python/caffe/io.py", line 2, in <module>
import skimage.io
ImportError: No module named skimage.io
>>>
报错缺少 skimage.io
下载：https://pypi.python.org/packages/source/s/scikit-image/scikit-image-0.12.3.tar.gz#md5=04ea833383e0b6ad5f65da21292c25e1
解压，进入,
python setup.py install
不成功，提示：
te-packages
Adding scikit-image 0.12.3 to easy-install.pth file
Installing skivi script to /usr/bin
Installed /usr/lib64/python2.7/site-packages/scikit_image-0.12.3-py2.7-linux-x86_64.egg
Processing dependencies for scikit-image==0.12.3
Searching for dask[array]>=0.5.0
Reading https://pypi.python.org/simple/dask/
Best match: dask 0.8.1.macosx-10.5-x86-64
Downloading https://pypi.python.org/packages/any/d/dask/dask-0.8.1.macosx-10.5-x86_64.tar.gz#md5=6271cc3687493136a6b743dc5271ab80
Processing dask-0.8.1.macosx-10.5-x86_64.tar.gz
error: Couldn‘t find a setup script in /tmp/easy_install-h26472/dask-0.8.1.macosx-10.5-x86_64.tar.gz
[root@localhost scikit-image-0.12.3]# python
在python里，import skimage.io会报：
>>> import skimage.io
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib64/python2.7/site-packages/scikit_image-0.12.3-py2.7-linux-x86_64.egg/skimage/io/__init__.py", line 7, in <module>
from .manage_plugins import *
File "/usr/lib64/python2.7/site-packages/scikit_image-0.12.3-py2.7-linux-x86_64.egg/skimage/io/manage_plugins.py", line 28, in <module>
from .collection import imread_collection_wrapper
File "/usr/lib64/python2.7/site-packages/scikit_image-0.12.3-py2.7-linux-x86_64.egg/skimage/io/collection.py", line 12, in <module>
from PIL import Image
ImportError: No module named PIL
（
原来用easy_install 这么方便！这个easy_install 我的系统有。
easy_install Image
会自动搜索依赖。
File "/usr/lib64/python2.7/distutils/command/build_ext.py", line 339, in run
self.build_extensions()
File "setup.py", line 512, in build_extensions
ValueError: jpeg is required unless explicitly disabled using --disable-jpeg, aborting
没有安装成功。
）
下载：
http://effbot.org/media/downloads/Imaging-1.1.7.tar.gz
解压后，进入目录，执行：
python setup.py install
成功：
running install_scripts
copying build/scripts-2.7/pilconvert.py -> /usr/bin
copying build/scripts-2.7/pildriver.py -> /usr/bin
copying build/scripts-2.7/pilfile.py -> /usr/bin
copying build/scripts-2.7/pilfont.py -> /usr/bin
copying build/scripts-2.7/pilprint.py -> /usr/bin
changing mode of /usr/bin/pilconvert.py to 755
changing mode of /usr/bin/pildriver.py to 755
changing mode of /usr/bin/pilfile.py to 755
changing mode of /usr/bin/pilfont.py to 755
changing mode of /usr/bin/pilprint.py to 755
running install_egg_info
Writing /usr/lib64/python2.7/site-packages/PIL/PIL-1.1.7-py2.7.egg-info
creating /usr/lib64/python2.7/site-packages/PIL.pth
[root@localhost Imaging-1.1.7]#
再次
>>> import skimage.io
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib64/python2.7/site-packages/scikit_image-0.12.3-py2.7-linux-x86_64.egg/skimage/io/__init__.py", line 11, in <module>
from ._io import *
File "/usr/lib64/python2.7/site-packages/scikit_image-0.12.3-py2.7-linux-x86_64.egg/skimage/io/_io.py", line 7, in <module>
from ..color import rgb2grey
File "/usr/lib64/python2.7/site-packages/scikit_image-0.12.3-py2.7-linux-x86_64.egg/skimage/color/__init__.py", line 1, in <module>
from .colorconv import (convert_colorspace,
File "/usr/lib64/python2.7/site-packages/scikit_image-0.12.3-py2.7-linux-x86_64.egg/skimage/color/colorconv.py", line 58, in <module>
from scipy import linalg
ImportError: No module named scipy
安装：
[root@localhost Downloads]# easy_install scipy
Searching for scipy
Reading https://pypi.python.org/simple/scipy/
Best match: scipy 0.17.0
Downloading https://pypi.python.org/packages/source/s/scipy/scipy-0.17.0.zip#md5=28a4fe29e980804db162524f10873211
Processing scipy-0.17.0.zip
Writing /tmp/easy_install-YgsnC3/scipy-0.17.0/setup.cfg
Running scipy-0.17.0/setup.py -q bdist_egg --dist-dir /tmp/easy_install-YgsnC3/scipy-0.17.0/egg-dist-tmp-wyWVj4
/usr/lib64/python2.7/site-packages/numpy/distutils/system_info.py:1428: UserWarning:
Atlas (http://math-atlas.sourceforge.net/) libraries not found.
Directories to search for the libraries can be specified in the
numpy/distutils/site.cfg file (section [atlas]) or by setting
the ATLAS environment variable.
warnings.warn(AtlasNotFoundError.__doc__)
/usr/lib64/python2.7/site-packages/numpy/distutils/system_info.py:1439: UserWarning:
Lapack (http://www.netlib.org/lapack/) libraries not found.
Directories to search for the libraries can be specified in the
numpy/distutils/site.cfg file (section [lapack]) or by setting
the LAPACK environment variable.
warnings.warn(LapackNotFoundError.__doc__)
/usr/lib64/python2.7/site-packages/numpy/distutils/system_info.py:1442: UserWarning:
Lapack (http://www.netlib.org/lapack/) sources not found.
Directories to search for the sources can be specified in the
numpy/distutils/site.cfg file (section [lapack_src]) or by setting
the LAPACK_SRC environment variable.
warnings.warn(LapackSrcNotFoundError.__doc__)
Running from scipy source directory.
error: no lapack/blas resources found
[root@localhost Downloads]#
失败！
从网上下载源码：http://ufpr.dl.sourceforge.net/project/scipy/scipy/0.16.1/scipy-0.16.1.tar.gz
python setup.py install
同样报错：
File "/usr/lib64/python2.7/site-packages/numpy/distutils/misc_util.py", line 935, in get_subpackage
caller_level = caller_level + 1)
File "/usr/lib64/python2.7/site-packages/numpy/distutils/misc_util.py", line 872, in _get_configuration_from_setup_py
config = setup_module.configuration(*args)
File "scipy/linalg/setup.py", line 20, in configuration
raise NotFoundError(‘no lapack/blas resources found‘)
numpy.distutils.system_info.NotFoundError: no lapack/blas resources found
[root@localhost scipy-0.16.1]#
看来要先解决这两个问题。
反复折腾都没有搞定。。。。
参考：http://blog.sina.com.cn/s/blog_62dfdc740101aoo6.html
重新编译atlas。 16:33~16:39
在等待过程，重新看numpy：
cp site.conf.example site.conf
将site.conf编辑为：
[DEFAULT]
library_dirs = /usr/local/lib
include_dirs = /usr/local/include
src_dirs = /home/gumh/Downloads/BLAS-3.6.0:/home/gumh/Downloads/lapack-3.1.1
[blas_opt]
libraries =f77blas,cblas,atlas
[lapack_opt]
libraries=lapack,f77blas,cblas,atlas
[atlas]
library_dirs = /usr/lib64/atlas/
include_dirs = /usr/include/atlas
[amd]
amd_libs = amd
#
[umfpack]
umfpack_libs = umfpack
[fftw]
libraries = fftw3
然后执行：python setup.py build --fcompiler=gnu95
执行下去了，可以看到中间有在对上面设定的src路径下的代码进行编译。
然后python setup.py install
按照这个site.conf来去build scipy-0.16.1，失败。
重新下载scipy-0.11.0 。https://pypi.python.org/packages/source/s/scipy/scipy-0.11.0.tar.gz#md5=842c81d35fd63579c41a8ca21a2419b9
解压，啥都没改u，阅读了那个INSTALL.txt：
python setup.py install
直接就运行了，中间看到有在编译那个lapack-3.1.1的文件，我在这里并没有指定，应该是上面numpy中指定的被保存起来了。
后面还是挂了：
/usr/bin/gfortran -Wall -Wall -shared build/temp.linux-x86_64-2.7/scipy/integrate/_odepackmodule.o -L/usr/local/lib -L/usr/lib64 -Lbuild/temp.linux-x86_64-2.7 -lodepack -llinpack_lite -lmach -lblas -lpython2.7 -lgfortran -o build/lib.linux-x86_64-2.7/scipy/integrate/_odepack.so
/usr/bin/ld: /usr/local/lib/libblas.a(dcopy.o): relocation R_X86_64_PC32 against undefined symbol `memcpy@@GLIBC_2.14‘ can not be used when making a shared object; recompile with -fPIC
/usr/bin/ld: final link failed: Bad value
collect2: error: ld returned 1 exit status
/usr/bin/ld: /usr/local/lib/libblas.a(dcopy.o): relocation R_X86_64_PC32 against undefined symbol `memcpy@@GLIBC_2.14‘ can not be used when making a shared object; recompile with -fPIC
/usr/bin/ld: final link failed: Bad value
collect2: error: ld returned 1 exit status
error: Command "/usr/bin/gfortran -Wall -Wall -shared build/temp.linux-x86_64-2.7/scipy/integrate/_odepackmodule.o -L/usr/local/lib -L/usr/lib64 -Lbuild/temp.linux-x86_64-2.7 -lodepack -llinpack_lite -lmach -lblas -lpython2.7 -lgfortran -o build/lib.linux-x86_64-2.7/scipy/integrate/_odepack.so" failed with exit status 1
[root@localhost scipy-0.11.0]#
意思是/usr/local/lib/libblas.a这个是静态库，不能用于pic的动态链接。
那我就要编译一个动态库出来。
于是重新进入
gfortran -c -O3 -fPIC *.f #加上了-fPIC
gcc -shared *.o -fPIC -o libblas.so
cp libblas.so /usr/local/lib/
再次执行 python setup.py install：
这次完成了：
/fftpack/tests/
copying scipy/fftpack/tests/fftw_single_ref.npz -> /usr/lib64/python2.7/site-packages/scipy/fftpack/tests/
copying scipy/fftpack/tests/gen_fftw_ref.py -> /usr/lib64/python2.7/site-packages/scipy/fftpack/tests/
creating /usr/lib64/python2.7/site-packages/scipy/weave/doc
copying scipy/weave/doc/tutorial.txt -> /usr/lib64/python2.7/site-packages/scipy/weave/doc/
copying scipy/weave/doc/tutorial_original.html -> /usr/lib64/python2.7/site-packages/scipy/weave/doc/
running install_egg_info
Writing /usr/lib64/python2.7/site-packages/scipy-0.11.0-py2.7.egg-info
running install_clib
[root@localhost scipy-0.11.0]#
[root@localhost Downloads]# python
Python 2.7.5 (default, Nov 20 2015, 02:00:19)
[GCC 4.8.5 20150623 (Red Hat 4.8.5-4)] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import scipy
>>>
ok，安装完成！
回到我们的上一层问题:import skimage.io出错，现在再来：
>>> import skimage.io
>>>
ok!
继续回到上一层问题：import caffe：
>>> import caffe
4.egg/skimage/_shared/_geometry.py", line 4, in <module>
from matplotlib import _path, path, transforms
ImportError: No module named matplotlib
还有问题，缺少matplotlib：
用easy_install matplotlib的方式安装。
太慢。
直接下载:https://pypi.python.org/packages/source/m/matplotlib/matplotlib-1.5.1.tar.gz#md5=f51847d8692cb63df64cd0bd0304fd20
解压，进入，执行：
python setup.py build
提示缺少必须的依赖：
* The following required packages can not be built:
* freetype, png
解决：
yum install freetype-devel
下载libpng源码：http://tenet.dl.sourceforge.net/project/libpng/libpng14/older-releases/1.4.14/libpng-1.4.14.tar.gz
解压，进入，执行：
./configure
make
make check
make install
可以看到，安装信息：
make[2]: Leaving directory `/home/zzz/Downloads/libpng-1.4.14‘
/usr/bin/mkdir -p ‘/usr/local/share/man/man3‘
/usr/bin/install -c -m 644 libpng.3 libpngpf.3 ‘/usr/local/share/man/man3‘
/usr/bin/mkdir -p ‘/usr/local/share/man/man5‘
/usr/bin/install -c -m 644 png.5 ‘/usr/local/share/man/man5‘
/usr/bin/mkdir -p ‘/usr/local/lib/pkgconfig‘
/usr/bin/install -c -m 644 libpng14.pc ‘/usr/local/lib/pkgconfig‘
/usr/bin/mkdir -p ‘/usr/local/include/libpng14‘
/usr/bin/install -c -m 644 png.h pngconf.h ‘/usr/local/include/libpng14‘
make install-data-hook
make[2]: Entering directory `/home/zzz/Downloads/libpng-1.4.14‘
cd /usr/local/include; rm -f png.h pngconf.h
cd /usr/local/include; ln -s libpng14/png.h png.h
cd /usr/local/include; ln -s libpng14/pngconf.h \
pngconf.h
cd /usr/local/lib/pkgconfig; rm -f libpng.pc
cd /usr/local/lib/pkgconfig; ln -s libpng14.pc libpng.pc
make[2]: Leaving directory `/home/zzz/Downloads/libpng-1.4.14‘
make[1]: Leaving directory `/home/zzz/Downloads/libpng-1.4.14‘
[root@localhost libpng-1.4.14]#
再次执行matplotlib的编译：
python setup.py build 成功。
python setup.py install 成功。
继续import caffe,出错：
ImportError: No module named google.protobuf.internal
参考：http://blog.csdn.net/littlestream9527/article/details/38734871
从网盘下载 ：http://pan.baidu.com/s/1pJlZubT
解压，进入，执行：
./configure
make
make install
ldconfig
然后进入源码目录的python子目录：
cd python
执行：
python setup.py build
python setup.py install
执行完后，再次的导入caffe模块：
[root@localhost Downloads]# python
Python 2.7.5 (default, Nov 20 2015, 02:00:19)
[GCC 4.8.5 20150623 (Red Hat 4.8.5-4)] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import caffe
/home/gumh/OpenSource/caffe-master/python/caffe/pycaffe.py:13: RuntimeWarning: to-Python converter for boost::shared_ptr<caffe::Net<float> > already registered; second conversion method ignored.
from ._caffe import Net, SGDSolver, NesterovSolver, AdaGradSolver, \
/home/gumh/OpenSource/caffe-master/python/caffe/pycaffe.py:13: RuntimeWarning: to-Python converter for boost::shared_ptr<caffe::Blob<float> > already registered; second conversion method ignored.
from ._caffe import Net, SGDSolver, NesterovSolver, AdaGradSolver, \
/home/gumh/OpenSource/caffe-master/python/caffe/pycaffe.py:13: RuntimeWarning: to-Python converter for boost::shared_ptr<caffe::Solver<float> > already registered; second conversion method ignored.
from ._caffe import Net, SGDSolver, NesterovSolver, AdaGradSolver, \
>>>
成功了。
下载caffe
拷贝Make.config.example Make.config
修改Make.config 取消注释cpu-only，注释掉cuda相关的
-----------------安装依赖的库------------------------
参考docs/install_yum.md，执行：
yum install protobuf-devel leveldb-devel snappy-devel opencv-devel boost-devel hdf5-devel
实际上，hdf5-devel这个安装会找不到。
但是：yum install gflags-devel glog-devel lmdb-devel这个不成功，找不到。只能手动安装：
# glog
wget https://google-glog.googlecode.com/files/glog-0.3.3.tar.gz
tar zxvf glog-0.3.3.tar.gz
cd glog-0.3.3
./configure
make && make install
连不上 google-glog.googlecode.com
从这里下载：
http://download.csdn.net/download/chenguangxing3/6661667
安装glog。
./configure --preifx=mypath
make
make install
# gflags
wget https://github.com/schuhschuh/gflags/archive/master.zip
unzip master.zip
cd gflags-master
mkdir build && cd build
export CXXFLAGS="-fPIC" && cmake .. && make VERBOSE=1
make && make install
cmake的时候，提示版本不够，需要2.8.12或以上，我的是2.8.11
升级cmake：https://cmake.org/files/v3.4/cmake-3.4.3.tar.gz
./bootstrap
gmake
gmake install
再次安装gflags成功。
# lmdb
git clone https://github.com/LMDB/lmdb
cd lmdb/libraries/liblmdb
make && make install
安装成功。
安装atlas：
yum install atlas
安装python 开发包：
yum install python-devel
安装cython: http://cython.org/ 下载0.24版的
http://cython.org/release/Cython-0.24.zip
进入解压路径，python setup.py install
耗时3分钟左右。
安装numpy
http://nbtelecom.dl.sourceforge.net/project/numpy/NumPy/1.8.0/numpy-1.8.0.zip
耗时3分钟左右。
------------------------编译安装caffe--------------------------
参考：http://caffe.berkeleyvision.org/installation.html中的Compilation with Make部分。
cp Makefile.config.example Makefile.config
# Adjust Makefile.config (for example, if using Anaconda Python, or if cuDNN is desired)
make all
make test
make runtest
修改：
# NOTE: this is required only if you will compile the python interface.
# We need to be able to find Python.h and numpy/arrayobject.h.
PYTHON_INCLUDE := /usr/include/python2.7 \
/usr/lib/python2.7/dist-packages/numpy/core/include
为：（因为我的arrayobject.h在另外lib64的路径下）
PYTHON_INCLUDE := /usr/include/python2.7 \
/usr/lib64/python2.7/site-packages/numpy/core/include
修改：打开CPU_ONLY := 1,并注释掉：USE_CUDNN := 1。因为我的电脑没有gpu相关的东西。
其他的没改动。
报错：
CXX src/caffe/blob.cpp
In file included from ./include/caffe/blob.hpp:8:0,
from src/caffe/blob.cpp:4:
./include/caffe/common.hpp:6:26: fatal error: glog/logging.h: No such file or directory
#include <glog/logging.h>
因为没有装glog，所以再找办法装上先。
安装后继续编译，报错：
CXX src/caffe/blob.cpp
In file included from ./include/caffe/util/math_functions.hpp:11:0,
from src/caffe/blob.cpp:7:
./include/caffe/util/mkl_alternate.hpp:11:19: fatal error: cblas.h: No such file or directory
#include <cblas.h>
没有装cblas，参考：http://blog.csdn.net/cleverysm/article/details/1925549,http://www.linuxidc.com/Linux/2015-02/113169.htm
http://www.netlib.org/blas/blast-forum/cblas.tgz
具体：
1. 编译blas，进入BLAS目录执行下面的命令
gfortran -c -O3 *.f # 编译所有的 .f 文件，生成 .o文件
ar rv libblas.a *.o # 链接所有的 .o文件，生成 .a 文件
2. 编译cblas，进入CBLAS目录，首先根据自己的操作系统平台，将某个Makefiel.XXX复制为Makefile.in，XXX表示操作系统。如果是Linux，那么就将Makefile.LINUX 复制为 Makefile.in。
cp ../BLAS/libblas.a testing # 将上一步编译成功的 libblas.a 复制到 CBLAS目录下的testing子目录
make # 编译所有的目录
此时会在CBLAS安装目录下的lib目录中产生一个静态链接库文件cblas_LINUX.a，这个库文件和上面得到的libblas.a文件就是我们所需要的。另外还需要的就是CBLAS/include中的cblas.h头文件。将三个文件全部拷贝到，你需调用的应用程序源码目录中。
拷贝到路径下：
cp include/cblas.h /usr/include/
cp lib/cblas_LINUX.a /usr/local/libcblas.a
cp testing/libblas.a /usr/local/lib
再次编译，报错：
src/caffe/layers/hdf5_data_layer.cpp:13:18: fatal error: hdf5.h: No such file or directory
#include "hdf5.h"
记得上面已经安装了hdf5-devel，怎么会出这个错？查看一下，发现yum这个没找到hdf5-devel，所以也就没有安装。
在docs/installion.md中，建议：but we suggest first installing the [Anaconda](https://store.continuum.io/cshop/anaconda/) Python distribution, which provides most of the necessary packages, as well as the `hdf5` library dependency.
准备安装hdf5:
http://www.hdfgroup.org/ftp/HDF5/current/src/hdf5-1.8.16.tar
解压后：
./configure --prefix=/usr/local/hdf5-1.8.3 ##指定安装路径，否则会默认安装到当前路径下。
make ##4分钟左右
make install
此时，在Makefile.config中增加HDF5_DIRS的路径到搜索路径下：
HDF5_DIRS :=/usr/local/hdf5-1.8.3/
# Whatever else you find you need goes here.
INCLUDE_DIRS := $(PYTHON_INCLUDE) /usr/local/include $(HDF5_DIRS)/include
LIBRARY_DIRS := $(PYTHON_LIB) /usr/local/lib /usr/lib $(HDF5_DIRS)/lib
再次编译，报错：
In file included from src/caffe/util/db.cpp:2:0:
./include/caffe/util/db_leveldb.hpp:7:24: fatal error: leveldb/db.h: No such file or directory
#include "leveldb/db.h"
^
compilation terminated.
缺少了google的kv数据库：leveldb，这个在installation.md中的Optional dependencies也提到了。
从这里下载：https://github.com/google/leveldb
参考：https://techoverflow.net/blog/2012/12/14/compiling-installing-leveldb-on-linux/
解压后，make
因为没有不支持install，所以，要手工将这些include和生成的lib拷贝到需要的地方。
cp --preserve=links out-shared/libleveldb.so* /usr/local/lib #只拷贝了动态库。
cp -r include/leveldb/ /usr/local/include/
再次编译，报错：
CXX src/caffe/util/upgrade_proto.cpp
AR -o .build_release/lib/libcaffe.a
LD -o .build_release/lib/libcaffe.so.1.0.0-rc3
/usr/bin/ld: cannot find -lcblas
/usr/bin/ld: cannot find -latlas
collect2: error: ld returned 1 exit status
make: *** [.build_release/lib/libcaffe.so.1.0.0-rc3] Error 1
静态库的链接已经完成了，这个动态库缺少了东西。上面安装cblas的时候，发现确实是只产生了静态库，需要增加动态库。
进入到CBLAS目录下，将静态库转为动态库：
gcc -shared lib/cblas_LINUX.a testing/libblas.a -o libcblas.so
cp libcblas.so /usr/local/
再次编译，报错：
CXX src/caffe/util/upgrade_proto.cpp
AR -o .build_release/lib/libcaffe.a
LD -o .build_release/lib/libcaffe.so.1.0.0-rc3
/usr/bin/ld: cannot find -lcblas
/usr/bin/ld: cannot find -latlas
collect2: error: ld returned 1 exit status
mv /usr/local/libcblas.* /usr/local/lib/ #就是把它们转移到 /usr/local/lib下，否则还会报错
再次编译，报错：
LD -o .build_release/lib/libcaffe.so.1.0.0-rc3
/usr/bin/ld: cannot find -latlas
collect2: error: ld returned 1 exit status
make: *** [.build_release/lib/libcaffe.so.1.0.0-rc3] Error 1
之前有安装 yum install atlas
查看：
[root@localhost caffe-master]# ll /usr/lib64/atlas/
total 21304
lrwxrwxrwx. 1 root root 17 Apr 8 15:54 libsatlas.so.3 -> libsatlas.so.3.10
-rwxr-xr-x. 1 root root 10852104 Nov 20 13:43 libsatlas.so.3.10
lrwxrwxrwx. 1 root root 17 Apr 8 15:54 libtatlas.so.3 -> libtatlas.so.3.10
-rwxr-xr-x. 1 root root 10959464 Nov 20 13:43 libtatlas.so.3.10
再安装yum install atlas-devel，查看：
[root@localhost caffe-master]# ll /usr/lib64/atlas/
total 21304
lrwxrwxrwx. 1 root root 17 Apr 9 14:03 libsatlas.so -> libsatlas.so.3.10
lrwxrwxrwx. 1 root root 17 Apr 8 15:54 libsatlas.so.3 -> libsatlas.so.3.10
-rwxr-xr-x. 1 root root 10852104 Nov 20 13:43 libsatlas.so.3.10
lrwxrwxrwx. 1 root root 17 Apr 9 14:03 libtatlas.so -> libtatlas.so.3.10
lrwxrwxrwx. 1 root root 17 Apr 8 15:54 libtatlas.so.3 -> libtatlas.so.3.10
-rwxr-xr-x. 1 root root 10959464 Nov 20 13:43 libtatlas.so.3.10
参考：http://blog.sina.com.cn/s/blog_4c4668bb01013gsv.html
发现里面有说到：
在 3.10.0 的 ATLAS 中没有了 --with-netlib-lapack指定lapack_LINUX.a 只需要 --with-netlib-lapack-tarfile,给出下载的包就行，不需要自己在去编译 LAPACK了。但是最后生成的 库文件也给整合了，不是上面的6个，而是两个
libsatals.so libtatlas.so, 去 BUILD/lib 里面查看 Makefile， 可以看到确实被整合了的。为了依其上的软件能更通用，又不想自己去改Makefile的内容，就用老版本的组合了。
于是，我建立一个软链接：
ln -s /usr/lib64/atlas/libsatlas.so /usr/lib64/libatlas.so
（如果我建立在atlas下，即ln -s /usr/lib64/atlas/libsatlas.so /usr/lib64/atlas/libatlas.so 还是找不到，就把它提到外面来了）
再次编译，这次ok了。
[root@localhost caffe-master]# make all
LD -o .build_release/lib/libcaffe.so.1.0.0-rc3
CXX tools/caffe.cpp
CXX/LD -o .build_release/tools/caffe.bin
CXX tools/compute_image_mean.cpp
CXX/LD -o .build_release/tools/compute_image_mean.bin
CXX tools/convert_imageset.cpp
CXX/LD -o .build_release/tools/convert_imageset.bin
CXX tools/device_query.cpp
CXX/LD -o .build_release/tools/device_query.bin
CXX tools/extract_features.cpp
CXX/LD -o .build_release/tools/extract_features.bin
CXX tools/finetune_net.cpp
CXX/LD -o .build_release/tools/finetune_net.bin
CXX tools/net_speed_benchmark.cpp
CXX/LD -o .build_release/tools/net_speed_benchmark.bin
CXX tools/test_net.cpp
CXX/LD -o .build_release/tools/test_net.bin
CXX tools/train_net.cpp
CXX/LD -o .build_release/tools/train_net.bin
CXX tools/upgrade_net_proto_binary.cpp
CXX/LD -o .build_release/tools/upgrade_net_proto_binary.bin
CXX tools/upgrade_net_proto_text.cpp
CXX/LD -o .build_release/tools/upgrade_net_proto_text.bin
CXX tools/upgrade_solver_proto_text.cpp
CXX/LD -o .build_release/tools/upgrade_solver_proto_text.bin
CXX examples/cifar10/convert_cifar_data.cpp
CXX/LD -o .build_release/examples/cifar10/convert_cifar_data.bin
CXX examples/cpp_classification/classification.cpp
CXX/LD -o .build_release/examples/cpp_classification/classification.bin
CXX examples/mnist/convert_mnist_data.cpp
CXX/LD -o .build_release/examples/mnist/convert_mnist_data.bin
CXX examples/siamese/convert_mnist_siamese_data.cpp
CXX/LD -o .build_release/examples/siamese/convert_mnist_siamese_data.bin
[root@localhost caffe-master]#
接着是make test,没有问题，花费5分钟左右。
接着：make runtest，报错：
[root@localhost caffe-master]# make runtest
.build_release/tools/caffe
.build_release/tools/caffe: error while loading shared libraries: libglog.so.0: cannot open shared object file: No such file or directory
make: *** [runtest] Error 127
但是在/usr/local/lib下有阿？
[root@localhost glog-0.3.3]# ll /usr/local/lib
total 5532
drwxr-xr-x. 3 root root 19 Apr 8 16:32 cmake
-rwxr-xr-x. 1 root root 130336 Mar 25 10:59 default.sfx
-rw-r--r--. 1 root root 792216 Apr 8 17:17 libblas.a
-rw-r--r--. 1 root root 387232 Apr 8 17:16 libcblas.a
-rwxr-xr-x. 1 root root 7691 Apr 9 11:39 libcblas.so
-rw-r--r--. 1 root root 628106 Apr 8 16:31 libgflags.a
-rw-r--r--. 1 root root 627712 Apr 8 16:31 libgflags_nothreads.a
-rw-r--r--. 1 root root 352318 Apr 8 16:59 libglog.a
-rwxr-xr-x. 1 root root 958 Apr 8 16:59 libglog.la
lrwxrwxrwx. 1 root root 16 Apr 8 16:59 libglog.so -> libglog.so.0.0.0
lrwxrwxrwx. 1 root root 16 Apr 8 16:59 libglog.so.0 -> libglog.so.0.0.0
-rwxr-xr-x. 1 root root 524192 Apr 8 16:59 libglog.so.0.0.0
-rwxr-xr-x. 3 root root 413462 Apr 9 11:26 libleveldb.so
-rwxr-xr-x. 3 root root 413462 Apr 9 11:26 libleveldb.so.1
-rwxr-xr-x. 3 root root 413462 Apr 9 11:26 libleveldb.so.1.18
-rw-r--r--. 1 root root 644748 Apr 8 16:33 liblmdb.a
-rwxr-xr-x. 1 root root 304783 Apr 8 16:33 liblmdb.so
drwxr-xr-x. 2 root root 23 Apr 8 16:59 pkgconfig
临时解决方法：
export LD_LIBRARY_PATH=/usr/local/lib/
继续make runtest,报错：
[root@localhost caffe-master]# make runtest
.build_release/tools/caffe
.build_release/tools/caffe: error while loading shared libraries: libhdf5_hl.so.10: cannot open shared object file: No such file or directory
make: *** [runtest] Error 127
再来：export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/hdf5-1.8.3/lib
这次ok了：
[ RUN ] NeuronLayerTest/0.TestExpLayer
[ OK ] NeuronLayerTest/0.TestExpLayer (0 ms)
[ RUN ] NeuronLayerTest/0.TestExpGradientBase2Shift1
[ OK ] NeuronLayerTest/0.TestExpGradientBase2Shift1 (1 ms)
[ RUN ] NeuronLayerTest/0.TestLogLayerBase2
[ OK ] NeuronLayerTest/0.TestLogLayerBase2 (0 ms)
[ RUN ] NeuronLayerTest/0.TestLogGradientBase2Shift1Scale3
[ OK ] NeuronLayerTest/0.TestLogGradientBase2Shift1Scale3 (2 ms)
[----------] 48 tests from NeuronLayerTest/0 (175 ms total)
[----------] Global test environment tear-down
[==========] 1050 tests from 146 test cases ran. (34229 ms total)
[ PASSED ] 1050 tests.
但这个不是好的解决方法，我得永久修改这个链接路径才行。
方法：
查看 /etc/ld.so.conf
发现引用/etc/ld.so.conf.d/下的所有conf结尾的文件，进入里面
可以看到那个atlas的内容就一句话，指明了lib的路径：/usr/lib64/atlas
新建一个conf文件：/etc/ld.so.conf.d/glog.conf，里面写：/usr/local/lib
再新建一个conf文件：/etc/ld.so.conf.d/hdf5.conf，里面写：/usr/local/hdf5-1.8.3/lib
最后执行：
/sbin/ldconfig -v
这样，就不用再去搞那个LD_LIBRARY_PATH了。
重新执行一次完整流程：
make clean
make all #3分钟
make test #4分钟
make runtest #1分钟
make pycaffe #40秒
编译python的包：
[root@localhost caffe-master]# make pycaffe
CXX/LD -o python/caffe/_caffe.so python/caffe/_caffe.cpp
touch python/caffe/proto/__init__.py
PROTOC (python) src/caffe/proto/caffe.proto
[root@localhost caffe-master]#
编译好了python包后，要把这个模块加入到python的路径下：（参考安装说明：http://caffe.berkeleyvision.org/installation.html python部分）
export PYTHONPATH=/home/zzz/OpenSource/caffe-master/python:$PYTHONPATH
编辑/etc/profile，增加：
export PYTHONPATH=$PYTHONPATH:/home/zzz/OpenSource/caffe-master/python/
然后打开python，导入caffe:
[root@localhost caffe-master]# python
Python 2.7.5 (default, Nov 20 2015, 02:00:19)
[GCC 4.8.5 20150623 (Red Hat 4.8.5-4)] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import caffe
/home/zzz/OpenSource/caffe-master/python/caffe/pycaffe.py:13: RuntimeWarning: to-Python converter for boost::shared_ptr<caffe::Net<float> > already registered; second conversion method ignored.
from ._caffe import Net, SGDSolver, NesterovSolver, AdaGradSolver, \
/home/zzz/OpenSource/caffe-master/python/caffe/pycaffe.py:13: RuntimeWarning: to-Python converter for boost::shared_ptr<caffe::Blob<float> > already registered; second conversion method ignored.
from ._caffe import Net, SGDSolver, NesterovSolver, AdaGradSolver, \
/home/zzz/OpenSource/caffe-master/python/caffe/pycaffe.py:13: RuntimeWarning: to-Python converter for boost::shared_ptr<caffe::Solver<float> > already registered; second conversion method ignored.
from ._caffe import Net, SGDSolver, NesterovSolver, AdaGradSolver, \
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/home/zzz/OpenSource/caffe-master/python/caffe/__init__.py", line 1, in <module>
from .pycaffe import Net, SGDSolver, NesterovSolver, AdaGradSolver, RMSPropSolver, AdaDeltaSolver, AdamSolver
File "/home/zzz/OpenSource/caffe-master/python/caffe/pycaffe.py", line 15, in <module>
import caffe.io
File "/home/zzz/OpenSource/caffe-master/python/caffe/io.py", line 2, in <module>
import skimage.io
ImportError: No module named skimage.io
>>>
报错缺少 skimage.io
下载：https://pypi.python.org/packages/source/s/scikit-image/scikit-image-0.12.3.tar.gz#md5=04ea833383e0b6ad5f65da21292c25e1
解压，进入,
python setup.py install
不成功，提示：
te-packages
Adding scikit-image 0.12.3 to easy-install.pth file
Installing skivi script to /usr/bin
Installed /usr/lib64/python2.7/site-packages/scikit_image-0.12.3-py2.7-linux-x86_64.egg
Processing dependencies for scikit-image==0.12.3
Searching for dask[array]>=0.5.0
Reading https://pypi.python.org/simple/dask/
Best match: dask 0.8.1.macosx-10.5-x86-64
Downloading https://pypi.python.org/packages/any/d/dask/dask-0.8.1.macosx-10.5-x86_64.tar.gz#md5=6271cc3687493136a6b743dc5271ab80
Processing dask-0.8.1.macosx-10.5-x86_64.tar.gz
error: Couldn‘t find a setup script in /tmp/easy_install-h26472/dask-0.8.1.macosx-10.5-x86_64.tar.gz
[root@localhost scikit-image-0.12.3]# python
在python里，import skimage.io会报：
>>> import skimage.io
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib64/python2.7/site-packages/scikit_image-0.12.3-py2.7-linux-x86_64.egg/skimage/io/__init__.py", line 7, in <module>
from .manage_plugins import *
File "/usr/lib64/python2.7/site-packages/scikit_image-0.12.3-py2.7-linux-x86_64.egg/skimage/io/manage_plugins.py", line 28, in <module>
from .collection import imread_collection_wrapper
File "/usr/lib64/python2.7/site-packages/scikit_image-0.12.3-py2.7-linux-x86_64.egg/skimage/io/collection.py", line 12, in <module>
from PIL import Image
ImportError: No module named PIL
（
原来用easy_install 这么方便！这个easy_install 我的系统有。
easy_install Image
会自动搜索依赖。
File "/usr/lib64/python2.7/distutils/command/build_ext.py", line 339, in run
self.build_extensions()
File "setup.py", line 512, in build_extensions
ValueError: jpeg is required unless explicitly disabled using --disable-jpeg, aborting
没有安装成功。
）
下载：
http://effbot.org/media/downloads/Imaging-1.1.7.tar.gz
解压后，进入目录，执行：
python setup.py install
成功：
running install_scripts
copying build/scripts-2.7/pilconvert.py -> /usr/bin
copying build/scripts-2.7/pildriver.py -> /usr/bin
copying build/scripts-2.7/pilfile.py -> /usr/bin
copying build/scripts-2.7/pilfont.py -> /usr/bin
copying build/scripts-2.7/pilprint.py -> /usr/bin
changing mode of /usr/bin/pilconvert.py to 755
changing mode of /usr/bin/pildriver.py to 755
changing mode of /usr/bin/pilfile.py to 755
changing mode of /usr/bin/pilfont.py to 755
changing mode of /usr/bin/pilprint.py to 755
running install_egg_info
Writing /usr/lib64/python2.7/site-packages/PIL/PIL-1.1.7-py2.7.egg-info
creating /usr/lib64/python2.7/site-packages/PIL.pth
[root@localhost Imaging-1.1.7]#
再次
>>> import skimage.io
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib64/python2.7/site-packages/scikit_image-0.12.3-py2.7-linux-x86_64.egg/skimage/io/__init__.py", line 11, in <module>
from ._io import *
File "/usr/lib64/python2.7/site-packages/scikit_image-0.12.3-py2.7-linux-x86_64.egg/skimage/io/_io.py", line 7, in <module>
from ..color import rgb2grey
File "/usr/lib64/python2.7/site-packages/scikit_image-0.12.3-py2.7-linux-x86_64.egg/skimage/color/__init__.py", line 1, in <module>
from .colorconv import (convert_colorspace,
File "/usr/lib64/python2.7/site-packages/scikit_image-0.12.3-py2.7-linux-x86_64.egg/skimage/color/colorconv.py", line 58, in <module>
from scipy import linalg
ImportError: No module named scipy
安装：
[root@localhost Downloads]# easy_install scipy
Searching for scipy
Reading https://pypi.python.org/simple/scipy/
Best match: scipy 0.17.0
Downloading https://pypi.python.org/packages/source/s/scipy/scipy-0.17.0.zip#md5=28a4fe29e980804db162524f10873211
Processing scipy-0.17.0.zip
Writing /tmp/easy_install-YgsnC3/scipy-0.17.0/setup.cfg
Running scipy-0.17.0/setup.py -q bdist_egg --dist-dir /tmp/easy_install-YgsnC3/scipy-0.17.0/egg-dist-tmp-wyWVj4
/usr/lib64/python2.7/site-packages/numpy/distutils/system_info.py:1428: UserWarning:
Atlas (http://math-atlas.sourceforge.net/) libraries not found.
Directories to search for the libraries can be specified in the
numpy/distutils/site.cfg file (section [atlas]) or by setting
the ATLAS environment variable.
warnings.warn(AtlasNotFoundError.__doc__)
/usr/lib64/python2.7/site-packages/numpy/distutils/system_info.py:1439: UserWarning:
Lapack (http://www.netlib.org/lapack/) libraries not found.
Directories to search for the libraries can be specified in the
numpy/distutils/site.cfg file (section [lapack]) or by setting
the LAPACK environment variable.
warnings.warn(LapackNotFoundError.__doc__)
/usr/lib64/python2.7/site-packages/numpy/distutils/system_info.py:1442: UserWarning:
Lapack (http://www.netlib.org/lapack/) sources not found.
Directories to search for the sources can be specified in the
numpy/distutils/site.cfg file (section [lapack_src]) or by setting
the LAPACK_SRC environment variable.
warnings.warn(LapackSrcNotFoundError.__doc__)
Running from scipy source directory.
error: no lapack/blas resources found
[root@localhost Downloads]#
失败！
从网上下载源码：http://ufpr.dl.sourceforge.net/project/scipy/scipy/0.16.1/scipy-0.16.1.tar.gz
python setup.py install
同样报错：
File "/usr/lib64/python2.7/site-packages/numpy/distutils/misc_util.py", line 935, in get_subpackage
caller_level = caller_level + 1)
File "/usr/lib64/python2.7/site-packages/numpy/distutils/misc_util.py", line 872, in _get_configuration_from_setup_py
config = setup_module.configuration(*args)
File "scipy/linalg/setup.py", line 20, in configuration
raise NotFoundError(‘no lapack/blas resources found‘)
numpy.distutils.system_info.NotFoundError: no lapack/blas resources found
[root@localhost scipy-0.16.1]#
看来要先解决这两个问题。
反复折腾都没有搞定。。。。
参考：http://blog.sina.com.cn/s/blog_62dfdc740101aoo6.html
重新编译atlas。 16:33~16:39
在等待过程，重新看numpy：
cp site.conf.example site.conf
将site.conf编辑为：
[DEFAULT]
library_dirs = /usr/local/lib
include_dirs = /usr/local/include
src_dirs = /home/gumh/Downloads/BLAS-3.6.0:/home/gumh/Downloads/lapack-3.1.1
[blas_opt]
libraries =f77blas,cblas,atlas
[lapack_opt]
libraries=lapack,f77blas,cblas,atlas
[atlas]
library_dirs = /usr/lib64/atlas/
include_dirs = /usr/include/atlas
[amd]
amd_libs = amd
#
[umfpack]
umfpack_libs = umfpack
[fftw]
libraries = fftw3
然后执行：python setup.py build --fcompiler=gnu95
执行下去了，可以看到中间有在对上面设定的src路径下的代码进行编译。
然后python setup.py install
按照这个site.conf来去build scipy-0.16.1，失败。
重新下载scipy-0.11.0 。https://pypi.python.org/packages/source/s/scipy/scipy-0.11.0.tar.gz#md5=842c81d35fd63579c41a8ca21a2419b9
解压，啥都没改u，阅读了那个INSTALL.txt：
python setup.py install
直接就运行了，中间看到有在编译那个lapack-3.1.1的文件，我在这里并没有指定，应该是上面numpy中指定的被保存起来了。
后面还是挂了：
/usr/bin/gfortran -Wall -Wall -shared build/temp.linux-x86_64-2.7/scipy/integrate/_odepackmodule.o -L/usr/local/lib -L/usr/lib64 -Lbuild/temp.linux-x86_64-2.7 -lodepack -llinpack_lite -lmach -lblas -lpython2.7 -lgfortran -o build/lib.linux-x86_64-2.7/scipy/integrate/_odepack.so
/usr/bin/ld: /usr/local/lib/libblas.a(dcopy.o): relocation R_X86_64_PC32 against undefined symbol `memcpy@@GLIBC_2.14‘ can not be used when making a shared object; recompile with -fPIC
/usr/bin/ld: final link failed: Bad value
collect2: error: ld returned 1 exit status
/usr/bin/ld: /usr/local/lib/libblas.a(dcopy.o): relocation R_X86_64_PC32 against undefined symbol `memcpy@@GLIBC_2.14‘ can not be used when making a shared object; recompile with -fPIC
/usr/bin/ld: final link failed: Bad value
collect2: error: ld returned 1 exit status
error: Command "/usr/bin/gfortran -Wall -Wall -shared build/temp.linux-x86_64-2.7/scipy/integrate/_odepackmodule.o -L/usr/local/lib -L/usr/lib64 -Lbuild/temp.linux-x86_64-2.7 -lodepack -llinpack_lite -lmach -lblas -lpython2.7 -lgfortran -o build/lib.linux-x86_64-2.7/scipy/integrate/_odepack.so" failed with exit status 1
[root@localhost scipy-0.11.0]#
意思是/usr/local/lib/libblas.a这个是静态库，不能用于pic的动态链接。
那我就要编译一个动态库出来。
于是重新进入
gfortran -c -O3 -fPIC *.f #加上了-fPIC
gcc -shared *.o -fPIC -o libblas.so
cp libblas.so /usr/local/lib/
再次执行 python setup.py install：
这次完成了：
/fftpack/tests/
copying scipy/fftpack/tests/fftw_single_ref.npz -> /usr/lib64/python2.7/site-packages/scipy/fftpack/tests/
copying scipy/fftpack/tests/gen_fftw_ref.py -> /usr/lib64/python2.7/site-packages/scipy/fftpack/tests/
creating /usr/lib64/python2.7/site-packages/scipy/weave/doc
copying scipy/weave/doc/tutorial.txt -> /usr/lib64/python2.7/site-packages/scipy/weave/doc/
copying scipy/weave/doc/tutorial_original.html -> /usr/lib64/python2.7/site-packages/scipy/weave/doc/
running install_egg_info
Writing /usr/lib64/python2.7/site-packages/scipy-0.11.0-py2.7.egg-info
running install_clib
[root@localhost scipy-0.11.0]#
[root@localhost Downloads]# python
Python 2.7.5 (default, Nov 20 2015, 02:00:19)
[GCC 4.8.5 20150623 (Red Hat 4.8.5-4)] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import scipy
>>>
ok，安装完成！
回到我们的上一层问题:import skimage.io出错，现在再来：
>>> import skimage.io
>>>
ok!
继续回到上一层问题：import caffe：
>>> import caffe
4.egg/skimage/_shared/_geometry.py", line 4, in <module>
from matplotlib import _path, path, transforms
ImportError: No module named matplotlib
还有问题，缺少matplotlib：
用easy_install matplotlib的方式安装。
太慢。
直接下载:https://pypi.python.org/packages/source/m/matplotlib/matplotlib-1.5.1.tar.gz#md5=f51847d8692cb63df64cd0bd0304fd20
解压，进入，执行：
python setup.py build
提示缺少必须的依赖：
* The following required packages can not be built:
* freetype, png
解决：
yum install freetype-devel
下载libpng源码：http://tenet.dl.sourceforge.net/project/libpng/libpng14/older-releases/1.4.14/libpng-1.4.14.tar.gz
解压，进入，执行：
./configure
make
make check
make install
可以看到，安装信息：
make[2]: Leaving directory `/home/zzz/Downloads/libpng-1.4.14‘
/usr/bin/mkdir -p ‘/usr/local/share/man/man3‘
/usr/bin/install -c -m 644 libpng.3 libpngpf.3 ‘/usr/local/share/man/man3‘
/usr/bin/mkdir -p ‘/usr/local/share/man/man5‘
/usr/bin/install -c -m 644 png.5 ‘/usr/local/share/man/man5‘
/usr/bin/mkdir -p ‘/usr/local/lib/pkgconfig‘
/usr/bin/install -c -m 644 libpng14.pc ‘/usr/local/lib/pkgconfig‘
/usr/bin/mkdir -p ‘/usr/local/include/libpng14‘
/usr/bin/install -c -m 644 png.h pngconf.h ‘/usr/local/include/libpng14‘
make install-data-hook
make[2]: Entering directory `/home/zzz/Downloads/libpng-1.4.14‘
cd /usr/local/include; rm -f png.h pngconf.h
cd /usr/local/include; ln -s libpng14/png.h png.h
cd /usr/local/include; ln -s libpng14/pngconf.h \
pngconf.h
cd /usr/local/lib/pkgconfig; rm -f libpng.pc
cd /usr/local/lib/pkgconfig; ln -s libpng14.pc libpng.pc
make[2]: Leaving directory `/home/zzz/Downloads/libpng-1.4.14‘
make[1]: Leaving directory `/home/zzz/Downloads/libpng-1.4.14‘
[root@localhost libpng-1.4.14]#
再次执行matplotlib的编译：
python setup.py build 成功。
python setup.py install 成功。
继续import caffe,出错：
ImportError: No module named google.protobuf.internal
参考：http://blog.csdn.net/littlestream9527/article/details/38734871
从网盘下载 ：http://pan.baidu.com/s/1pJlZubT
解压，进入，执行：
./configure
make
make install
ldconfig
然后进入源码目录的python子目录：
cd python
执行：
python setup.py build
python setup.py install
执行完后，再次的导入caffe模块：
[root@localhost Downloads]# python
Python 2.7.5 (default, Nov 20 2015, 02:00:19)
[GCC 4.8.5 20150623 (Red Hat 4.8.5-4)] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import caffe
/home/gumh/OpenSource/caffe-master/python/caffe/pycaffe.py:13: RuntimeWarning: to-Python converter for boost::shared_ptr<caffe::Net<float> > already registered; second conversion method ignored.
from ._caffe import Net, SGDSolver, NesterovSolver, AdaGradSolver, \
/home/gumh/OpenSource/caffe-master/python/caffe/pycaffe.py:13: RuntimeWarning: to-Python converter for boost::shared_ptr<caffe::Blob<float> > already registered; second conversion method ignored.
from ._caffe import Net, SGDSolver, NesterovSolver, AdaGradSolver, \
/home/gumh/OpenSource/caffe-master/python/caffe/pycaffe.py:13: RuntimeWarning: to-Python converter for boost::shared_ptr<caffe::Solver<float> > already registered; second conversion method ignored.
from ._caffe import Net, SGDSolver, NesterovSolver, AdaGradSolver, \
>>>
成功了。
[转]caffe的配置过程
声明：以上内容来自用户投稿及互联网公开渠道收集整理发布，本网站不拥有所有权，未作人工编辑处理，也不承担相关法律责任，若内容有误或涉及侵权可进行投诉： 投诉/举报 工作人员会在5个工作日内联系你，一经查实，本站将立刻删除涉嫌侵权内容。