基于VMware的虚拟Linux集群搭建-lvs+keepalived

首页 > 代码库 > 基于VMware的虚拟Linux集群搭建-lvs+keepalived

基于VMware的虚拟Linux集群搭建-lvs+keepalived

2024-09-03 02:25:16 215人阅读

通过keepalived实现lvs服务器的的双机热备和真实服务器之间的负载均衡的blog挺多的，在搭建的时候也参考了相关博文，不同人搭建的实验环境不一样，本文是基于VM搭建的虚拟集群环境，全部虚拟机网卡模式为NAT方式相连，处于同一网段。

搭建环境：

使用redhead 2.6.32-431.el6.x86_64版本的linux，创建四台，配置相关网络信息，确保同一网段下。

技术分享

配置好各自ip即可，虚拟ip在配置lvs时设定。

安装配置LVS

1.在主备Lvs上安装ipvsadm和keepalived

LVS是通过IPVS模块实现的，检查kernel是否支持LVS的IPVS模块，再安装IPVS管理软件ipvsadm

[root@rex ~]# modprobe -l | grep ipvs

kernel/net/netfilter/ipvs/ip_vs.ko

kernel/net/netfilter/ipvs/ip_vs_rr.ko

kernel/net/netfilter/ipvs/ip_vs_wrr.ko

kernel/net/netfilter/ipvs/ip_vs_lc.ko

kernel/net/netfilter/ipvs/ip_vs_wlc.ko

kernel/net/netfilter/ipvs/ip_vs_lblc.ko

kernel/net/netfilter/ipvs/ip_vs_lblcr.ko

kernel/net/netfilter/ipvs/ip_vs_dh.ko

kernel/net/netfilter/ipvs/ip_vs_sh.ko

kernel/net/netfilter/ipvs/ip_vs_sed.ko

kernel/net/netfilter/ipvs/ip_vs_nq.ko

kernel/net/netfilter/ipvs/ip_vs_ftp.ko

kernel/net/netfilter/ipvs/ip_vs_pe_sip.ko

安装ipvsadm

[root@rex ~]# yum install ipvsadm

能通过ipvsadm --help查看相关信息即安装成功。

安装keepalived

安装依赖库：yum install -y openssl openssl-devel（我是缺这两个，具体编译时候如果报错则安装相关提示补安装相关缺漏）

下载keepalived：

http://www.keepalived.org/software/keepalived-1.2.6.tar.gz

安装命令：

# tar zxvf keepalived-1.2.6.tar.gz

# cd keepalived-1.2.6

# ./configure --sysconf=/etc --with-kernel-dir=/lib/modules/2.6.32-431.el6.x86_64 #指定配置文件存放路径，指定使用内核源码中的头文件。

#make

#make install

#ln -s /usr/local/sbin/keepalived /sbin/ #把启动命令软连接到sbin，方便以后直接使用

能通过keepalived --help查看相关信息即安装成功。

配置LVS：

主LVS：

! Configuration File for keepalived

global_defs {

notification_email { #配置告警邮件发送

XXXX@qq.com

}

notification_email_from Keepalived@localhost

smtp_server 192.168.200.1

smtp_connect_timeout 30

router_id LVS_DEVEL

}

vrrp_instance VI_1 {

state MASTER #主LVS标志

interface eth1 #设置对外服务口

virtual_router_id 51

priority 100 #设置优先级，优先级高的为主机

advert_int 1 #设置同步时间间隔

authentication { #设置主备LVS验证类型和密码，两边必须一致

auth_type PASS

auth_pass 1111

}

virtual_ipaddress { #设置虚拟服务IP

192.168.153.110

}

virtual_server 192.168.153.110 80 {

delay_loop 6 #健康检查时间间隔

lb_algo rr #负载均衡算法，此为轮询算法

lb_kind DR #负载均衡转发规则，也就是IP转发规则，DR转发方式最快，但是所有机器必须在一个网段内，还有NAT和TUNEL两种转发方式

protocol TCP

real_server 192.168.153.131 80 {

weight 1

TCP_CHECK {

connect_timeout 3

nb_get_retry 3

delay_before_retry 3

}

real_server 192.168.153.135 80 {

weight 1

TCP_CHECK {

connect_timeout 3

nb_get_retry 3

delay_before_retry 3

}

备用LVS配置：复制上面配置修改两处即可：1.state MASTER改为state BACKUP 2.将priority 100改低，这里改为80

配置Realserver

对所有Realserver重复做一下步骤

在/etc/init.d下创建脚本lvsrs

1 #!/bin/bash

3 VIP=192.168.153.110

4 ./etc/rc.d/init.d/functions

5 case "$1" in

6 start)

7 echo "Start LVS of Realserver!"

8 /sbin/ifconfig lo:0 $VIP broadcast $VIP netmask 255.255.255.255 up

9 echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore

10 echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce

11 echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore

12 echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce

14 ;;

16 stop)

18 /sbin/ifconfig lo:0 down

19 echo "0" >/proc/sys/net/ipv4/conf/lo/arp_ignore

20 echo "0" >/proc/sys/net/ipv4/conf/lo/arp_announce

21 echo "0" >/proc/sys/net/ipv4/conf/all/arp_ignore

22 echo "0" >/proc/sys/net/ipv4/conf/all/arp_announce

23 echo "RealServer Stoped"

25 ;;

27 *)

29 echo "Usage: $0 {start|stop}"

31 exit 1

33 esac

修改其执行权限：chmod 755 /etc/init.d/lvsrs

执行启动脚本：

#service lvsrs start

查看其ip：

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0

inet6 addr: ::1/128 Scope:Host

UP LOOPBACK RUNNING MTU:16436 Metric:1

RX packets:8 errors:0 dropped:0 overruns:0 frame:0

TX packets:8 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:480 (480.0 b) TX bytes:480 (480.0 b)

lo:0 Link encap:Local Loopback

inet addr:192.168.153.110 Mask:255.255.255.255

UP LOOPBACK RUNNING MTU:16436 Metric:1

在realserver上安装apache并且启动！

在 /var/www/hmtl/下添加index.html测试主页，不同server用不同界面进行区分。

启动LVS并且测试：

主备LVS启动：/etc/init.d/keepalived start

查看启动状态：

主LVS：

Feb 4 20:11:41 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) Transition to MASTER STATE

Feb 4 20:11:42 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) Entering MASTER STATE

Feb 4 20:11:42 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) setting protocol VIPs.

Feb 4 20:11:42 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth2 for 192.168.153.110

Feb 4 20:11:42 rex Keepalived_healthcheckers[9521]: Netlink reflector reports IP 192.168.153.110 added

Feb 4 20:11:47 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth2 for 192.168.153.110

备LVS：

Feb 4 20:18:16 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) Received higher prio advert

Feb 4 20:18:16 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) Entering BACKUP STATE

Feb 4 20:18:16 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) removing protocol VIPs.

Feb 4 20:18:16 rex Keepalived_healthcheckers[9521]: Netlink reflector reports IP 192.168.153.110 removed

Feb 4 20:19:06 rex dhclient[1265]: DHCPREQUEST on eth2 to 192.168.153.254 port 67 (xid=0x6f9b7b38)

用ip addr和ipvsadm查看路由情况

主LVS# ip addr

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN

link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

inet 127.0.0.1/8 scope host lo

inet6 ::1/128 scope host

valid_lft forever preferred_lft forever

2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000

link/ether 00:0c:29:3e:ce:ce brd ff:ff:ff:ff:ff:ff

inet 192.168.153.133/24 brd 192.168.153.255 scope global eth1

inet 192.168.153.110/32 scope global eth1

inet6 fe80::20c:29ff:fe3e:cece/64 scope link

valid_lft forever preferred_lft forever

备LVS# ip addr

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN

link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

inet 127.0.0.1/8 scope host lo

inet6 ::1/128 scope host

valid_lft forever preferred_lft forever

2: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000

link/ether 00:0c:29:0e:6c:b0 brd ff:ff:ff:ff:ff:ff

inet 192.168.153.134/24 brd 192.168.153.255 scope global eth2

inet6 fe80::20c:29ff:fe0e:6cb0/64 scope link

valid_lft forever preferred_lft forever

[root@rex ~]# ipvsadm

IP Virtual Server version 1.2.1 (size=4096)

Prot LocalAddress:Port Scheduler Flags

-> RemoteAddress:Port Forward Weight ActiveConn InActConn

TCP bogon:http rr

-> bogon:http Route 1 0 0

测试：

1.高可用性功能测试--主备lvs切换

把主lvs stop！然后查看备lvs日志，然后把主恢复，再看备lvs的日志

Feb 4 20:11:41 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) Transition to MASTER STATE

Feb 4 20:11:42 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) Entering MASTER STATE

Feb 4 20:11:42 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) setting protocol VIPs.

Feb 4 20:11:42 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth2 for 192.168.153.110

Feb 4 20:11:42 rex Keepalived_healthcheckers[9521]: Netlink reflector reports IP 192.168.153.110 added

Feb 4 20:11:47 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth2 for 192.168.153.110

Feb 4 20:18:16 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) Received higher prio advert

Feb 4 20:18:16 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) Entering BACKUP STATE

Feb 4 20:18:16 rex Keepalived_vrrp[9522]: VRRP_Instance(VI_1) removing protocol VIPs.

Feb 4 20:18:16 rex Keepalived_healthcheckers[9521]: Netlink reflector reports IP 192.168.153.110 removed

Feb 4 20:19:06 rex dhclient[1265]: DHCPREQUEST on eth2 to 192.168.153.254 port 67 (xid=0x6f9b7b38)

Feb 4 20:19:06 rex dhclient[1265]: DHCPACK from 192.168.153.254 (xid=0x6f9b7b38)

Feb 4 20:19:06 rex dhclient[1265]: bound to 192.168.153.134 -- renewal in 737 seconds.

Feb 4 20:19:06 rex NetworkManager[1241]: <info> (eth2): DHCPv4 state changed renew -> renew

Feb 4 20:19:06 rex NetworkManager[1241]: <info> address 192.168.153.134

Feb 4 20:19:06 rex NetworkManager[1241]: <info> prefix 24 (255.255.255.0)

Feb 4 20:19:06 rex NetworkManager[1241]: <info> gateway 192.168.153.2

Feb 4 20:19:06 rex NetworkManager[1241]: <info> nameserver ‘192.168.153.2‘

Feb 4 20:19:06 rex NetworkManager[1241]: <info> domain name ‘localdomain‘

2.负载均衡测试

在本地浏览器上访问192.168.153.110，不断刷新，可以看到代表不同realserver的主界面。

技术分享

3.故障切换测试

把realserver1的服务stop掉，查看LVS的日志，然后恢复再看：

Feb 4 20:25:59 rex Keepalived_healthcheckers[9588]: Netlink reflector reports IP 192.168.153.110 added

Feb 4 20:26:04 rex Keepalived_vrrp[9589]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth1 for 192.168.153.110

Feb 4 20:27:53 rex Keepalived_healthcheckers[9588]: TCP connection to [192.168.153.135]:80 failed !!!

Feb 4 20:27:53 rex Keepalived_healthcheckers[9588]: Removing service [192.168.153.135]:80 from VS [192.168.153.110]:80

Feb 4 20:27:53 rex Keepalived_healthcheckers[9588]: Remote SMTP server [192.168.200.1]:25 connected.

Feb 4 20:28:14 rex Keepalived_healthcheckers[9588]: Error reading data from remote SMTP server [192.168.200.1]:25.

Feb 4 20:28:29 rex Keepalived_healthcheckers[9588]: TCP connection to [192.168.153.135]:80 success.

Feb 4 20:28:29 rex Keepalived_healthcheckers[9588]: Adding service [192.168.153.135]:80 to VS [192.168.153.110]:80

Feb 4 20:28:29 rex Keepalived_healthcheckers[9588]: Remote SMTP server [192.168.200.1]:25 connected.

本文出自 “走在产品路上的运维dog~” 博客，请务必保留此出处http://vrfxie.blog.51cto.com/11026252/1894947

基于VMware的虚拟Linux集群搭建-lvs+keepalived

声明：以上内容来自用户投稿及互联网公开渠道收集整理发布，本网站不拥有所有权，未作人工编辑处理，也不承担相关法律责任，若内容有误或涉及侵权可进行投诉：投诉/举报工作人员会在5个工作日内联系你，一经查实，本站将立刻删除涉嫌侵权内容。

联系
我们

首页 > 代码库 > 基于VMware的虚拟Linux集群搭建-lvs+keepalived

基于VMware的虚拟Linux集群搭建-lvs+keepalived

看完仍有疑问？有类似问题直接问程序猿