首页 > 代码库 > C#调用斑马打印机打印条码标签(支持COM、LPT、USB、TCP连接方式和ZPL、EPL、CPCL指令)

C#调用斑马打印机打印条码标签(支持COM、LPT、USB、TCP连接方式和ZPL、EPL、CPCL指令)

2024-09-05 05:07:04   223人阅读

在批量打印商品标签时一般都要加上条码或图片，而这类应用大多是使用斑马打印机，所以我也遇到了怎么打印的问题。

一种办法是用标签设计软件做好模板，在标签设计软件中打印，这种办法不用写代码，但对我来说觉得不能接受，所以尝试代码解决问题。

网上搜索一番，找不到什么资料，基本都是说发送ZPL、EPL指令到打印机，而且还是COM/LPT口连接打印机。后来研究.net的打印类库，发现是用绘图方式打印至打印机的，也叫GDI打印，于是思路有了点突破，那我可以用报表工具画好标签，运行报表时，把结果输出位图，再发送至打印机。

后来又找到一种更好的办法，利用标签设计软件做好模板，打印至本地文件，把其中的ZPL、EPL指令拷贝出来，替换其中动态变化的内容为变量名，做成一个模板文本，在代码中动态替换变量，再把指令输出至打印机。

折腾了几天，终于把这两种思路都实现了，顺便解决了USB接口打印机的ZPL、EPL指令发送问题。

今天有点困，改天再详细讲解一下这两种思路的具体实现。

==============================================================================================================
如何获取标签设计软件输出至打印的ZPL指令？安装好打印机驱动，修改打印机端口，新建一个打印机端口，类型为本地端口，端口名称设置为C:\printer.log，再用标签设计软件打印一次，此文件中就有ZPL指令了。

 ==============================================================================================================

2012-06-02：发布代码ZebraPrintHelper.cs。

==============================================================================================================

2013-01-17：发布代码ZebraPrintHelper.cs，修正BUG，新增TCP打印支持Zebra无线打印QL320+系列打印机。已经生产环境实际应用，支持POS小票、吊牌、洗水唛、条码、文本混合标签打印。因涉及公司源码，只能截图VS解决方案给大家看。

==============================================================================================================

 

 ZebraPrintHelper类代码：

[csharp] view plain copy
 
  1. using System;  
  2. using System.Collections.Generic;  
  3. using System.Drawing;  
  4. using System.Drawing.Imaging;  
  5. using System.IO;  
  6. using System.IO.Ports;  
  7. using System.Net.Sockets;  
  8. using System.Runtime.InteropServices;  
  9. using System.Text;  
  10.   
  11. namespace Umisky.BarcodePrint.Core {  
  12.     /// <summary>  
  13.     /// 斑马打印助手，支持LPT/COM/USB/TCP四种模式，适用于标签、票据、条码打印。  
  14.     /// </summary>  
  15.     public static class ZebraPrintHelper {  
  16.  
  17.         #region 定义私有字段  
  18.         /// <summary>  
  19.         /// 线程锁，防止多线程调用。  
  20.         /// </summary>  
  21.         private static object SyncRoot = new object();  
  22.         /// <summary>  
  23.         /// ZPL压缩字典  
  24.         /// </summary>  
  25.         private static List<KeyValue> compressDictionary = new List<KeyValue>();  
  26.         #endregion  
  27.  
  28.         #region 定义属性  
  29.         public static float TcpLabelMaxHeightCM { get; set; }  
  30.         public static int TcpPrinterDPI { get; set; }  
  31.         public static string TcpIpAddress { get; set; }  
  32.         public static int TcpPort { get; set; }  
  33.         public static int Copies { get; set; }  
  34.         public static int Port { get; set; }  
  35.         public static string PrinterName { get; set; }  
  36.         public static bool IsWriteLog { get; set; }  
  37.         public static DeviceType PrinterType { get; set; }  
  38.         public static ProgrammingLanguage PrinterProgrammingLanguage { get; set; }  
  39.         /// <summary>  
  40.         /// 日志保存目录，WEB应用注意不能放在BIN目录下。  
  41.         /// </summary>  
  42.         public static string LogsDirectory { get; set; }  
  43.         public static byte[] GraphBuffer { get; set; }  
  44.         private static int GraphWidth { get; set; }  
  45.         private static int GraphHeight { get; set; }  
  46.         private static int RowSize {  
  47.             get {  
  48.                 return (((GraphWidth) + 31) >> 5) << 2;  
  49.             }  
  50.         }  
  51.         private static int RowRealBytesCount {  
  52.             get {  
  53.                 if ((GraphWidth % 8) > 0) {  
  54.                     return GraphWidth / 8 + 1;  
  55.                 }  
  56.                 else {  
  57.                     return GraphWidth / 8;  
  58.                 }  
  59.             }  
  60.         }  
  61.         #endregion  
  62.  
  63.         #region 静态构造方法  
  64.         static ZebraPrintHelper() {  
  65.             initCompressCode();  
  66.             Port = 1;  
  67.             GraphBuffer = new byte[0];  
  68.             IsWriteLog = false;  
  69.             LogsDirectory = "logs";  
  70.             PrinterProgrammingLanguage = ProgrammingLanguage.ZPL;  
  71.         }  
  72.   
  73.         private static void initCompressCode() {  
  74.             //G H I J K L M N O P Q R S T U V W X Y        对应1,2,3,4……18,19。  
  75.             //g h i j k l m n o p q r s t u v w x y z      对应20,40,60,80……340,360,380,400。              
  76.             for (int i = 0; i < 19; i++) {  
  77.                 compressDictionary.Add(new KeyValue() { Key = Convert.ToChar(71 + i), Value = i + 1 });  
  78.             }  
  79.             for (int i = 0; i < 20; i++) {  
  80.                 compressDictionary.Add(new KeyValue() { Key = Convert.ToChar(103 + i), Value = (i + 1) * 20 });  
  81.             }  
  82.         }  
  83.         #endregion  
  84.  
  85.         #region 日志记录方法  
  86.         private static void WriteLog(string text, LogType logType) {  
  87.             string endTag = string.Format("\r\n{0}\r\n", new string(‘=‘, 80));  
  88.             string path = string.Format("{0}\\{1}-{2}.log", LogsDirectory, DateTime.Now.ToString("yyyy-MM-dd"), logType);  
  89.             if (!Directory.Exists(LogsDirectory)) {  
  90.                 Directory.CreateDirectory(LogsDirectory);  
  91.             }  
  92.             if (logType == LogType.Error) {  
  93.                 File.AppendAllText(path, string.Format("{0}{1}", text, endTag), Encoding.UTF8);  
  94.             }  
  95.             if (logType == LogType.Print) {  
  96.                 File.AppendAllText(path, string.Format("{0}{1}", text, endTag), Encoding.UTF8);  
  97.             }  
  98.         }  
  99.   
  100.         private static void WriteLog(byte[] bytes, LogType logType) {  
  101.             string endTag = string.Format("\r\n{0}\r\n", new string(‘=‘, 80));  
  102.             string path = string.Format("{0}\\{1}-{2}.log", LogsDirectory, DateTime.Now.ToString("yyyy-MM-dd"), logType);  
  103.             if (!Directory.Exists(LogsDirectory)) {  
  104.                 Directory.CreateDirectory(LogsDirectory);  
  105.             }  
  106.             if (logType == LogType.Error) {  
  107.                 File.AppendAllText(path, string.Format("{0}{1}", Encoding.UTF8.GetString(bytes), endTag), Encoding.UTF8);  
  108.             }  
  109.             if (logType == LogType.Print) {  
  110.                 File.AppendAllText(path, string.Format("{0}{1}", Encoding.UTF8.GetString(bytes), endTag), Encoding.UTF8);  
  111.             }  
  112.         }  
  113.         #endregion  
  114.  
  115.         #region 封装方法，方便调用。  
  116.         public static bool PrintWithCOM(string cmd, int port, bool isWriteLog) {  
  117.             PrinterType = DeviceType.COM;  
  118.             Port = port;  
  119.             IsWriteLog = isWriteLog;  
  120.             return PrintCommand(cmd);  
  121.         }  
  122.   
  123.         public static bool PrintWithCOM(byte[] bytes, int port, bool isWriteLog) {  
  124.             PrinterType = DeviceType.COM;  
  125.             Port = port;  
  126.             IsWriteLog = isWriteLog;  
  127.             return PrintGraphics(bytes);  
  128.         }  
  129.   
  130.         public static bool PrintWithLPT(string cmd, int port, bool isWriteLog) {  
  131.             PrinterType = DeviceType.LPT;  
  132.             Port = port;  
  133.             IsWriteLog = isWriteLog;  
  134.             return PrintCommand(cmd);  
  135.         }  
  136.   
  137.         public static bool PrintWithLPT(byte[] bytes, int port, bool isWriteLog) {  
  138.             PrinterType = DeviceType.LPT;  
  139.             Port = port;  
  140.             IsWriteLog = isWriteLog;  
  141.             return PrintGraphics(bytes);  
  142.         }  
  143.   
  144.         public static bool PrintWithTCP(string cmd, bool isWriteLog) {  
  145.             PrinterType = DeviceType.TCP;  
  146.             IsWriteLog = isWriteLog;  
  147.             return PrintCommand(cmd);  
  148.         }  
  149.   
  150.         public static bool PrintWithTCP(byte[] bytes, bool isWriteLog) {  
  151.             PrinterType = DeviceType.TCP;  
  152.             IsWriteLog = isWriteLog;  
  153.             return PrintGraphics(bytes);  
  154.         }  
  155.   
  156.         public static bool PrintWithDRV(string cmd, string printerName, bool isWriteLog) {  
  157.             PrinterType = DeviceType.DRV;  
  158.             PrinterName = printerName;  
  159.             IsWriteLog = isWriteLog;  
  160.             return PrintCommand(cmd);  
  161.         }  
  162.   
  163.         public static bool PrintWithDRV(byte[] bytes, string printerName, bool isWriteLog) {  
  164.             PrinterType = DeviceType.DRV;  
  165.             PrinterName = printerName;  
  166.             IsWriteLog = isWriteLog;  
  167.             return PrintGraphics(bytes);  
  168.         }  
  169.         #endregion  
  170.  
  171.         #region 打印ZPL、EPL、CPCL、TCP指令  
  172.         public static bool PrintCommand(string cmd) {  
  173.             lock (SyncRoot) {  
  174.                 bool result = false;  
  175.                 try {  
  176.                     switch (PrinterType) {  
  177.                         case DeviceType.COM:  
  178.                             result = comPrint(Encoding.Default.GetBytes(cmd));  
  179.                             break;  
  180.                         case DeviceType.LPT:  
  181.                             result = lptPrint(Encoding.Default.GetBytes(cmd));  
  182.                             break;  
  183.                         case DeviceType.DRV:  
  184.                             result = drvPrint(Encoding.Default.GetBytes(cmd));  
  185.                             break;  
  186.                         case DeviceType.TCP:  
  187.                             result = tcpPrint(Encoding.Default.GetBytes(cmd));  
  188.                             break;  
  189.                     }  
  190.                     if (!string.IsNullOrEmpty(cmd) && IsWriteLog) {  
  191.                         WriteLog(cmd, LogType.Print);  
  192.                     }  
  193.                 }  
  194.                 catch (Exception ex) {  
  195.                     //记录日志  
  196.                     if (IsWriteLog) {  
  197.                         WriteLog(string.Format("{0} => {1}\r\n{2}", DateTime.Now, ex.Message, ex), LogType.Error);  
  198.                     }  
  199.                     throw new Exception(ex.Message, ex);  
  200.                 }  
  201.                 finally {  
  202.                     GraphBuffer = new byte[0];  
  203.                 }  
  204.                 return result;  
  205.             }  
  206.         }  
  207.         #endregion  
  208.  
  209.         #region 打印图像  
  210.         public static bool PrintGraphics(byte[] graph) {  
  211.             lock (SyncRoot) {  
  212.                 bool result = false;  
  213.                 try {  
  214.                     GraphBuffer = graph;  
  215.                     byte[] cmdBytes = new byte[0];  
  216.                     switch (PrinterProgrammingLanguage) {  
  217.                         case ProgrammingLanguage.ZPL:  
  218.                             cmdBytes = getZPLBytes();  
  219.                             break;  
  220.                         case ProgrammingLanguage.EPL:  
  221.                             cmdBytes = getEPLBytes();  
  222.                             break;  
  223.                         case ProgrammingLanguage.CPCL:  
  224.                             cmdBytes = getCPCLBytes();  
  225.                             break;  
  226.                     }  
  227.                     switch (PrinterType) {  
  228.                         case DeviceType.COM:  
  229.                             result = comPrint(cmdBytes);  
  230.                             break;  
  231.                         case DeviceType.LPT:  
  232.                             result = lptPrint(cmdBytes);  
  233.                             break;  
  234.                         case DeviceType.DRV:  
  235.                             result = drvPrint(cmdBytes);  
  236.                             break;  
  237.                         case DeviceType.TCP:  
  238.                             result = tcpPrint(cmdBytes);  
  239.                             break;  
  240.                     }  
  241.                     if (cmdBytes.Length > 0 && IsWriteLog) {  
  242.                         WriteLog(cmdBytes, LogType.Print);  
  243.                     }  
  244.                 }  
  245.                 catch (Exception ex) {  
  246.                     //记录日志  
  247.                     if (IsWriteLog) {  
  248.                         WriteLog(string.Format("{0} => {1}\r\n{2}", DateTime.Now, ex.Message, ex), LogType.Error);  
  249.                     }  
  250.                     throw new Exception(ex.Message, ex);  
  251.                 }  
  252.                 finally {  
  253.                     GraphBuffer = new byte[0];  
  254.                 }  
  255.                 return result;  
  256.             }  
  257.         }  
  258.         #endregion  
  259.  
  260.         #region 打印指令  
  261.         private static bool drvPrint(byte[] cmdBytes) {  
  262.             bool result = false;  
  263.             try {  
  264.                 if (!string.IsNullOrEmpty(PrinterName)) {  
  265.                     result = WinDrvPort.SendBytesToPrinter(PrinterName, cmdBytes);  
  266.                 }  
  267.             }  
  268.             catch (Exception ex) {  
  269.                 throw new Exception(ex.Message, ex);  
  270.             }  
  271.             return result;  
  272.         }  
  273.   
  274.         private static bool comPrint(byte[] cmdBytes) {  
  275.             bool result = false;  
  276.             SerialPort com = new SerialPort(string.Format("{0}{1}", PrinterType, Port), 9600, Parity.None, 8, StopBits.One);  
  277.             try {  
  278.                 com.Open();  
  279.                 com.Write(cmdBytes, 0, cmdBytes.Length);  
  280.                 result = true;  
  281.             }  
  282.             catch (Exception ex) {  
  283.                 throw new Exception(ex.Message, ex);  
  284.             }  
  285.             finally {  
  286.                 if (com.IsOpen) {  
  287.                     com.Close();  
  288.                 }  
  289.             }  
  290.             return result;  
  291.         }  
  292.   
  293.         private static bool lptPrint(byte[] cmdBytes) {  
  294.             return LptPort.Write(string.Format("{0}{1}", PrinterType, Port), cmdBytes);  
  295.         }  
  296.   
  297.         private static bool tcpPrint(byte[] cmdBytes) {  
  298.             bool result = false;  
  299.             TcpClient tcp = null;  
  300.             try {  
  301.                 tcp = TimeoutSocket.Connect(string.Empty, TcpIpAddress, TcpPort, 1000);  
  302.                 tcp.SendTimeout = 1000;  
  303.                 tcp.ReceiveTimeout = 1000;  
  304.                 if (tcp.Connected) {  
  305.                     tcp.Client.Send(cmdBytes);  
  306.                     result = true;  
  307.                 }  
  308.             }  
  309.             catch (Exception ex) {  
  310.                 throw new Exception("打印失败，请检查打印机或网络设置。", ex);  
  311.             }  
  312.             finally {  
  313.                 if (tcp != null) {  
  314.                     if (tcp.Client != null) {  
  315.                         tcp.Client.Close();  
  316.                         tcp.Client = null;  
  317.                     }  
  318.                     tcp.Close();  
  319.                     tcp = null;  
  320.                 }  
  321.             }  
  322.             return result;  
  323.         }  
  324.         #endregion  
  325.  
  326.         #region 生成ZPL图像打印指令  
  327.         private static byte[] getZPLBytes() {  
  328.             byte[] bmpData = getBitmapData();  
  329.             int bmpDataLength = bmpData.Length;  
  330.             for (int i = 0; i < bmpDataLength; i++) {  
  331.                 bmpData[i] ^= 0xFF;  
  332.             }  
  333.             string textBitmap = string.Empty, copiesString = string.Empty;  
  334.             string textHex = BitConverter.ToString(bmpData).Replace("-", string.Empty);  
  335.             textBitmap = CompressLZ77(textHex);  
  336.             for (int i = 0; i < Copies; i++) {  
  337.                 copiesString += "^XA^FO0,0^XGR:IMAGE.GRF,1,1^FS^XZ";  
  338.             }  
  339.             string text = string.Format("~DGR:IMAGE.GRF,{0},{1},{2}{3}^IDR:IMAGE.GRF",  
  340.                 GraphHeight * RowRealBytesCount,  
  341.                 RowRealBytesCount,  
  342.                 textBitmap,  
  343.                 copiesString);  
  344.             return Encoding.UTF8.GetBytes(text);  
  345.         }  
  346.         #endregion  
  347.  
  348.         #region 生成EPL图像打印指令  
  349.         private static byte[] getEPLBytes() {  
  350.             byte[] buffer = getBitmapData();  
  351.             string text = string.Format("N\r\nGW{0},{1},{2},{3},{4}\r\nP{5},1\r\n",  
  352.                 0,  
  353.                 0,  
  354.                 RowRealBytesCount,  
  355.                 GraphHeight,  
  356.                 Encoding.GetEncoding("iso-8859-1").GetString(buffer),  
  357.                 Copies);  
  358.             return Encoding.GetEncoding("iso-8859-1").GetBytes(text);  
  359.         }  
  360.         #endregion  
  361.  
  362.         #region 生成CPCL图像打印指令  
  363.         public static byte[] getCPCLBytes() {  
  364.             //GRAPHICS Commands  
  365.             //Bit-mapped graphics can be printed by using graphics commands. ASCII hex (hexadecimal) is  
  366.             //used for expanded graphics data (see example). Data size can be reduced to one-half by utilizing the  
  367.             //COMPRESSED-GRAPHICS commands with the equivalent binary character(s) of the hex data. When  
  368.             //using CG, a single 8 bit character is sent for every 8 bits of graphics data. When using EG two characters  
  369.             //(16 bits) are used to transmit 8 bits of graphics data, making EG only half as efficient. Since this data is  
  370.             //character data, however, it can be easier to handle and transmit than binary data.  
  371.             //Format:  
  372.             //{command} {width} {height} {x} {y} {data}  
  373.             //where:  
  374.             //{command}: Choose from the following:  
  375.             //EXPANDED-GRAPHICS (or EG): Prints expanded graphics horizontally.  
  376.             //VEXPANDED-GRAPHICS (or VEG): Prints expanded graphics vertically.  
  377.             //COMPRESSED-GRAPHICS (or CG): Prints compressed graphics horizontally.  
  378.             //VCOMPRESSED-GRAPHICS (or VCG): Prints compressed graphics vertically.  
  379.             //{width}: Byte-width of image.  
  380.             //{height} Dot-height of image.  
  381.             //{x}: Horizontal starting position.  
  382.             //{y}: Vertical starting position.  
  383.             //{data}: Graphics data.  
  384.             //Graphics command example  
  385.             //Input:  
  386.             //! 0 200 200 210 1  
  387.             //EG 2 16 90 45 F0F0F0F0F0F0F0F00F0F0F0F0F0F0F0F  
  388.             //F0F0F0F0F0F0F0F00F0F0F0F0F0F0F0F  
  389.             //FORM  
  390.             //PRINT  
  391.   
  392.             byte[] bmpData = getBitmapData();  
  393.             int bmpDataLength = bmpData.Length;  
  394.             for (int i = 0; i < bmpDataLength; i++) {  
  395.                 bmpData[i] ^= 0xFF;  
  396.             }  
  397.             string textHex = BitConverter.ToString(bmpData).Replace("-", string.Empty);  
  398.             string text = string.Format("! {0} {1} {2} {3} {4}\r\nEG {5} {6} {7} {8} {9}\r\nFORM\r\nPRINT\r\n",  
  399.                 0, //水平偏移量  
  400.                 TcpPrinterDPI, //横向DPI  
  401.                 TcpPrinterDPI, //纵向DPI  
  402.                 (int)(TcpLabelMaxHeightCM / 2.54f * TcpPrinterDPI), //标签最大像素高度=DPI*标签纸高度(英寸)  
  403.                 Copies, //份数  
  404.                 RowRealBytesCount, //图像的字节宽度  
  405.                 GraphHeight, //图像的像素高度  
  406.                 0, //横向的开始位置  
  407.                 0, //纵向的开始位置  
  408.                 textHex  
  409.                 );  
  410.             return Encoding.UTF8.GetBytes(text);  
  411.         }  
  412.         #endregion  
  413.  
  414.         #region 获取单色位图数据  
  415.         /// <summary>  
  416.         ///   
  417.         /// </summary>  
  418.         /// <param name="pimage"></param>  
  419.         /// <returns></returns>  
  420.         public static Bitmap ConvertToGrayscale(Bitmap pimage) {  
  421.             Bitmap source = null;  
  422.   
  423.             // If original bitmap is not already in 32 BPP, ARGB format, then convert  
  424.             if (pimage.PixelFormat != PixelFormat.Format32bppArgb) {  
  425.                 source = new Bitmap(pimage.Width, pimage.Height, PixelFormat.Format32bppArgb);  
  426.                 source.SetResolution(pimage.HorizontalResolution, pimage.VerticalResolution);  
  427.                 using (Graphics g = Graphics.FromImage(source)) {  
  428.                     g.DrawImageUnscaled(pimage, 0, 0);  
  429.                 }  
  430.             }  
  431.             else {  
  432.                 source = pimage;  
  433.             }  
  434.   
  435.             // Lock source bitmap in memory  
  436.             BitmapData sourceData = source.LockBits(new Rectangle(0, 0, source.Width, source.Height), ImageLockMode.ReadOnly, PixelFormat.Format32bppArgb);  
  437.   
  438.             // Copy image data to binary array  
  439.             int imageSize = sourceData.Stride * sourceData.Height;  
  440.             byte[] sourceBuffer = new byte[imageSize];  
  441.             Marshal.Copy(sourceData.Scan0, sourceBuffer, 0, imageSize);  
  442.   
  443.             // Unlock source bitmap  
  444.             source.UnlockBits(sourceData);  
  445.   
  446.             // Create destination bitmap  
  447.             Bitmap destination = new Bitmap(source.Width, source.Height, PixelFormat.Format1bppIndexed);  
  448.   
  449.             // Lock destination bitmap in memory  
  450.             BitmapData destinationData = destination.LockBits(new Rectangle(0, 0, destination.Width, destination.Height), ImageLockMode.WriteOnly, PixelFormat.Format1bppIndexed);  
  451.   
  452.             // Create destination buffer  
  453.             imageSize = destinationData.Stride * destinationData.Height;  
  454.             byte[] destinationBuffer = new byte[imageSize];  
  455.   
  456.             int sourceIndex = 0;  
  457.             int destinationIndex = 0;  
  458.             int pixelTotal = 0;  
  459.             byte destinationValue = 0;  
  460.             int pixelValue = 128;  
  461.             int height = source.Height;  
  462.             int width = source.Width;  
  463.             int threshold = 500;  
  464.   
  465.             // Iterate lines  
  466.             for (int y = 0; y < height; y++) {  
  467.                 sourceIndex = y * sourceData.Stride;  
  468.                 destinationIndex = y * destinationData.Stride;  
  469.                 destinationValue = 0;  
  470.                 pixelValue = 128;  
  471.   
  472.                 // Iterate pixels  
  473.                 for (int x = 0; x < width; x++) {  
  474.                     // Compute pixel brightness (i.e. total of Red, Green, and Blue values)  
  475.                     pixelTotal = sourceBuffer[sourceIndex + 1] + sourceBuffer[sourceIndex + 2] + sourceBuffer[sourceIndex + 3];  
  476.                     if (pixelTotal > threshold) {  
  477.                         destinationValue += (byte)pixelValue;  
  478.                     }  
  479.                     if (pixelValue == 1) {  
  480.                         destinationBuffer[destinationIndex] = destinationValue;  
  481.                         destinationIndex++;  
  482.                         destinationValue = 0;  
  483.                         pixelValue = 128;  
  484.                     }  
  485.                     else {  
  486.                         pixelValue >>= 1;  
  487.                     }  
  488.                     sourceIndex += 4;  
  489.                 }  
  490.                 if (pixelValue != 128) {  
  491.                     destinationBuffer[destinationIndex] = destinationValue;  
  492.                 }  
  493.             }  
  494.   
  495.             // Copy binary image data to destination bitmap  
  496.             Marshal.Copy(destinationBuffer, 0, destinationData.Scan0, imageSize);  
  497.   
  498.             // Unlock destination bitmap  
  499.             destination.UnlockBits(destinationData);  
  500.   
  501.             // Dispose of source if not originally supplied bitmap  
  502.             if (source != pimage) {  
  503.                 source.Dispose();  
  504.             }  
  505.   
  506.             // Return  
  507.             return destination;  
  508.         }  
  509.         /// <summary>  
  510.         /// 获取单色位图数据(1bpp)，不含文件头、信息头、调色板三类数据。  
  511.         /// </summary>  
  512.         /// <returns></returns>  
  513.         private static byte[] getBitmapData() {  
  514.             MemoryStream srcStream = new MemoryStream();  
  515.             MemoryStream dstStream = new MemoryStream();  
  516.             Bitmap srcBmp = null;  
  517.             Bitmap dstBmp = null;  
  518.             byte[] srcBuffer = null;  
  519.             byte[] dstBuffer = null;  
  520.             byte[] result = null;  
  521.             try {  
  522.                 srcStream = new MemoryStream(GraphBuffer);  
  523.                 srcBmp = Bitmap.FromStream(srcStream) as Bitmap;  
  524.                 srcBuffer = srcStream.ToArray();  
  525.                 GraphWidth = srcBmp.Width;  
  526.                 GraphHeight = srcBmp.Height;  
  527.                 //dstBmp = srcBmp.Clone(new Rectangle(0, 0, srcBmp.Width, srcBmp.Height), PixelFormat.Format1bppIndexed);  
  528.                 dstBmp = ConvertToGrayscale(srcBmp);  
  529.                 dstBmp.Save(dstStream, ImageFormat.Bmp);  
  530.                 dstBuffer = dstStream.ToArray();  
  531.   
  532.                 int bfOffBits = BitConverter.ToInt32(dstBuffer, 10);  
  533.                 result = new byte[GraphHeight * RowRealBytesCount];  
  534.   
  535.                 //读取时需要反向读取每行字节实现上下翻转的效果，打印机打印顺序需要这样读取。  
  536.                 for (int i = 0; i < GraphHeight; i++) {  
  537.                     Array.Copy(dstBuffer, bfOffBits + (GraphHeight - 1 - i) * RowSize, result, i * RowRealBytesCount, RowRealBytesCount);  
  538.                 }  
  539.             }  
  540.             catch (Exception ex) {  
  541.                 throw new Exception(ex.Message, ex);  
  542.             }  
  543.             finally {  
  544.                 if (srcStream != null) {  
  545.                     srcStream.Dispose();  
  546.                     srcStream = null;  
  547.                 }  
  548.                 if (dstStream != null) {  
  549.                     dstStream.Dispose();  
  550.                     dstStream = null;  
  551.                 }  
  552.                 if (srcBmp != null) {  
  553.                     srcBmp.Dispose();  
  554.                     srcBmp = null;  
  555.                 }  
  556.                 if (dstBmp != null) {  
  557.                     dstBmp.Dispose();  
  558.                     dstBmp = null;  
  559.                 }  
  560.             }  
  561.             return result;  
  562.         }  
  563.         #endregion  
  564.  
  565.         #region LZ77图像字节流压缩方法  
  566.         public static string CompressLZ77(string text) {  
  567.             //将转成16进制的文本进行压缩  
  568.             string result = string.Empty;  
  569.             char[] arrChar = text.ToCharArray();  
  570.             int count = 1;  
  571.             for (int i = 1; i < text.Length; i++) {  
  572.                 if (arrChar[i - 1] == arrChar[i]) {  
  573.                     count++;  
  574.                 }  
  575.                 else {  
  576.                     result += convertNumber(count) + arrChar[i - 1];  
  577.                     count = 1;  
  578.                 }  
  579.                 if (i == text.Length - 1) {  
  580.                     result += convertNumber(count) + arrChar[i];  
  581.                 }  
  582.             }  
  583.             return result;  
  584.         }  
  585.   
  586.         public static string DecompressLZ77(string text) {  
  587.             string result = string.Empty;  
  588.             char[] arrChar = text.ToCharArray();  
  589.             int count = 0;  
  590.             for (int i = 0; i < arrChar.Length; i++) {  
  591.                 if (isHexChar(arrChar[i])) {  
  592.                     //十六进制值  
  593.                     result += new string(arrChar[i], count == 0 ? 1 : count);  
  594.                     count = 0;  
  595.                 }  
  596.                 else {  
  597.                     //压缩码  
  598.                     int value = GetCompressValue(arrChar[i]);  
  599.                     count += value;  
  600.                 }  
  601.             }  
  602.             return result;  
  603.         }  
  604.   
  605.         private static int GetCompressValue(char c) {  
  606.             int result = 0;  
  607.             for (int i = 0; i < compressDictionary.Count; i++) {  
  608.                 if (c == compressDictionary[i].Key) {  
  609.                     result = compressDictionary[i].Value;  
  610.                 }  
  611.             }  
  612.             return result;  
  613.         }  
  614.   
  615.         private static bool isHexChar(char c) {  
  616.             return c > 47 && c < 58 || c > 64 && c < 71 || c > 96 && c < 103;  
  617.         }  
  618.   
  619.         private static string convertNumber(int count) {  
  620.             //将连续的数字转换成LZ77压缩代码，如000可用I0表示。  
  621.             string result = string.Empty;  
  622.             if (count > 1) {  
  623.                 while (count > 0) {  
  624.                     for (int i = compressDictionary.Count - 1; i >= 0; i--) {  
  625.                         if (count >= compressDictionary[i].Value) {  
  626.                             result += compressDictionary[i].Key;  
  627.                             count -= compressDictionary[i].Value;  
  628.                             break;  
  629.                         }  
  630.                     }  
  631.                 }  
  632.             }  
  633.             return result;  
  634.         }  
  635.         #endregion  
  636.     }  
  637. }  

 

 

调用例子代码：

[csharp] view plain copy
 
  1. private void BackgroundWorkerPrint_DoWork(object sender, DoWorkEventArgs e) {  
  2.     BackgroundWorker worker = sender as BackgroundWorker;  
  3.   
  4.     int i = 0, nextRemainder = 0, count = this._listBarcodeData.Count;  
  5.     bool flag = true;  
  6.     float pageWidth, pageHeight;  
  7.     int dpiX, dpiY, perPaperFactor;  
  8.     string reportPath = string.Format(@"{0}/Reports/{1}", Application.StartupPath, this._modelType);  
  9.     PrintLog printLog = new PrintLog() { Operater = LoginName };  
  10.     PrinterSettings printerSettings = new PrinterSettings() { PrinterName = PrintParam, Copies = 1 };  
  11.   
  12.     using (StreamReader tr = new StreamReader(this.ModelFilePath)) {  
  13.         XElement xe = XDocument.Load(tr).Root.Elements()  
  14.             .Elements(XName.Get("ModelType")).First(x => x.Value == this._modelType).Parent;  
  15.         pageWidth = float.Parse(xe.Elements(XName.Get("PageWidth")).First().Value);  
  16.         pageHeight = float.Parse(xe.Elements(XName.Get("PageHeight")).First().Value);  
  17.         dpiX = int.Parse(xe.Elements(XName.Get("DotPerInchX")).First().Value);  
  18.         dpiY = int.Parse(xe.Elements(XName.Get("DotPerInchY")).First().Value);  
  19.         perPaperFactor = int.Parse(xe.Elements(XName.Get("PerPaperFactor")).First().Value);  
  20.         this._no = int.Parse(xe.Elements(XName.Get("NO")).First().Value);  
  21.     }  
  22.   
  23.     using (LocalReportHelper printHelper = new LocalReportHelper(reportPath)) {  
  24.         printHelper.PrintTypeNO = this._no;  
  25.         printHelper.PrintLogInformation = printLog;  
  26.         printHelper.ExportImageDeviceInfo.DpiX = dpiX;  
  27.         printHelper.ExportImageDeviceInfo.DpiY = dpiY;  
  28.         printHelper.ExportImageDeviceInfo.PageWidth = pageWidth;  
  29.         printHelper.ExportImageDeviceInfo.PageHeight = pageHeight;  
  30.         foreach (BarcodeData bdCurrent in this._listBarcodeData) {  
  31.             if (worker.CancellationPending == true) {  
  32.                 e.Cancel = true;  
  33.                 break;  
  34.             }  
  35.             else {  
  36.                 try {  
  37.                     DataSet dsCurrent = this.GetDataForPrinterByBarcode(bdCurrent.Barcode, bdCurrent.IncreaseType);  
  38.                     DataSet dsNext = null, dsPrevious = dsCurrent.Copy();  
  39.   
  40.                     int amount = this._printType == 0 ? 1 : bdCurrent.Amount - nextRemainder;  
  41.                     int copies = amount / perPaperFactor;  
  42.                     int remainder = nextRemainder = amount % perPaperFactor;  
  43.   
  44.                     Action<DataSet, int, string, int> actPrint = (ds, duplicates, barcodes, amountForLog) => {  
  45.                         printHelper.PrintLogInformation.Barcode = barcodes;  
  46.                         printHelper.PrintLogInformation.Amount = amountForLog;  
  47.                         if (this.PrintType == 0 && DeviceType == DeviceType.DRV) {  
  48.                             printerSettings.Copies = (short)duplicates;  
  49.                             printHelper.WindowsDriverPrint(printerSettings, dpiX, ds);  
  50.                         }  
  51.                         else {  
  52.                             printHelper.OriginalPrint(DeviceType, ds, duplicates, PrintParam);  
  53.                         }  
  54.                     };  
  55.   
  56.                     if (copies > 0) {  
  57.                         int amountForCopy = copies;  
  58.                         if (perPaperFactor > 1) {  
  59.                             DataSet dsCurrentCopy = dsCurrent.CopyForBarcode();  
  60.                             dsCurrent.Merge(dsCurrentCopy);  
  61.                             amountForCopy = copies * perPaperFactor;  
  62.                         }  
  63.   
  64.                         actPrint.Invoke(dsCurrent, copies, bdCurrent.Barcode, amountForCopy);  
  65.                     }  
  66.                     if (remainder > 0) {  
  67.                         int nextIndex = i + 1;  
  68.                         string barcodes = bdCurrent.Barcode;  
  69.                         if (nextIndex < count) {  
  70.                             BarcodeData bdNext = this._listBarcodeData[nextIndex];  
  71.                             dsNext = this.GetDataForPrinterByBarcode(bdNext.Barcode, bdNext.IncreaseType);  
  72.                             dsPrevious.Merge(dsNext);  
  73.                             barcodes += "," + bdNext.Barcode;  
  74.                         }  
  75.                         actPrint.Invoke(dsPrevious, 1, barcodes, 1);  
  76.                     }  
  77.                     worker.ReportProgress(i++, string.Format("正在生成 {0} 并输送往打印机...", bdCurrent.Barcode));  
  78.   
  79.                     if (this._printType == 0) {  
  80.                         count = 1;  
  81.                         flag = true;  
  82.                         break;  
  83.                     }  
  84.                 }  
  85.                 catch (Exception ex) {  
  86.                     flag = false;  
  87.                     e.Result = ex.Message;  
  88.                     break;  
  89.                 }  
  90.             }  
  91.         }  
  92.         if (!e.Cancel && flag) {  
  93.             e.Result = string.Format("打印操作成功完成，共处理条码 {0} 条", count);  
  94.         }  
  95.     }  
  96. }  

 

LocalReportHelper类代码：

[csharp] view plain copy
 
  1. using System;  
  2. using System.Configuration;  
  3. using System.Data;  
  4. using System.Drawing;  
  5. using System.Drawing.Imaging;  
  6. using System.Drawing.Printing;  
  7. using System.IO;  
  8. using System.Text;  
  9. using System.Windows.Forms;  
  10. using Microsoft.Reporting.WinForms;  
  11. using Umisky.BarcodePrint.Core;  
  12.   
  13. namespace Umisky.BarcodePrint.Codes {  
  14.     public class LocalReportHelper : IDisposable {  
  15.  
  16.         #region Properties  
  17.   
  18.         public String LocalReportPath { get; set; }  
  19.         public LocalReport LocalReportInstance { get; private set; }  
  20.         public GraphDeviceInfo ExportImageDeviceInfo { get; set; }  
  21.         public PrintLog PrintLogInformation { get; set; }  
  22.         public int PrintTypeNO { get; set; }  
  23.  
  24.         #endregion  
  25.   
  26.         private Stream _stream;  
  27.         private int _bmpDPI;  
  28.         private DataSet _ds;  
  29.   
  30.         public LocalReportHelper(String reportPath)  
  31.             : this(reportPath, new GraphDeviceInfo() {  
  32.                 ColorDepth = 1,  
  33.                 DpiX = 203,  
  34.                 DpiY = 203,  
  35.                 PageWidth = 8f,  
  36.                 PageHeight = 12.2f,  
  37.                 MarginTop = 0.2f  
  38.             }) { }  
  39.   
  40.         public LocalReportHelper(String reportPath, GraphDeviceInfo deviceInfo) {  
  41.             this._bmpDPI = 96;  
  42.   
  43.             this.LocalReportPath = reportPath;  
  44.             this.ExportImageDeviceInfo = deviceInfo;  
  45.             this.LocalReportInstance = new LocalReport() { ReportPath = reportPath };  
  46.             this.LocalReportInstance.SubreportProcessing += new SubreportProcessingEventHandler(LocalReportInstance_SubreportProcessing);  
  47.         }  
  48.   
  49.         private void LocalReportInstance_SubreportProcessing(object sender, SubreportProcessingEventArgs e) {  
  50.             foreach (DataTable dt in this._ds.Tables) {  
  51.                 e.DataSources.Add(new ReportDataSource(dt.TableName, dt));  
  52.             }  
  53.         }  
  54.   
  55.         public void Dispose() {  
  56.             this.ExportImageDeviceInfo = null;  
  57.             this.LocalReportInstance = null;  
  58.             this.LocalReportPath = null;  
  59.   
  60.             this._ds = null;  
  61.         }  
  62.   
  63.         public void AddReportParameter(string paramName, string value) {  
  64.             this.LocalReportInstance.SetParameters(new ReportParameter(paramName, value));  
  65.         }  
  66.  
  67.         #region Export hang title image by reporting services  
  68.   
  69.         private void AddWashIcones() {  
  70.             this.LocalReportInstance.EnableExternalImages = true;  
  71.             this.LocalReportInstance.SetParameters(new ReportParameter("AppPath", Application.StartupPath));  
  72.         }  
  73.   
  74.         private void AddBarcodesAssembly() {  
  75.             this.LocalReportInstance.AddTrustedCodeModuleInCurrentAppDomain(ConfigurationManager.AppSettings["BarcodesAssembly"]);  
  76.         }  
  77.   
  78.         private Stream CreateStreamCallBack(string name, string fileNameExtension, Encoding encoding, string mimeType, bool willSeek) {  
  79.             string tempFolderPath = string.Concat(Environment.GetEnvironmentVariable("TEMP"), "/");  
  80.             this._stream = new FileStream(string.Concat(tempFolderPath, name, ".", fileNameExtension), FileMode.Create);  
  81.             return this._stream;  
  82.         }  
  83.         private void Export() {  
  84.             if (string.IsNullOrEmpty(this.LocalReportPath) ||  
  85.                 this.LocalReportInstance == null ||  
  86.                 this.ExportImageDeviceInfo == null) {  
  87.                 throw new InvalidExpressionException("Invalid parameters");  
  88.             }  
  89.             if (this.PrintTypeNO >= -1 || this.PrintTypeNO == -3) {  
  90.                 this.AddBarcodesAssembly();  
  91.                 if (this.PrintTypeNO >= 0) {  
  92.                     this.AddWashIcones();  
  93.                 }  
  94.             }  
  95.             if (this.PrintTypeNO >= 0) {  
  96.                 this.LocalReportInstance.DataSources.Clear();  
  97.                 foreach (DataTable dt in this._ds.Tables) {  
  98.                     this.LocalReportInstance.DataSources.Add(new ReportDataSource(dt.TableName, dt));  
  99.                 }  
  100.             }  
  101.             this.LocalReportInstance.Refresh();  
  102.   
  103.             if (this._stream != null) {  
  104.                 this._stream.Close();  
  105.                 this._stream = null;  
  106.             }  
  107.             Warning[] warnings;  
  108.             this.LocalReportInstance.Render(  
  109.                 "Image",  
  110.                 this.ExportImageDeviceInfo.ToString(),  
  111.                 PageCountMode.Actual,  
  112.                 CreateStreamCallBack,  
  113.                 out warnings);  
  114.             this._stream.Position = 0;  
  115.         }  
  116.         private void SaveLog() {  
  117.             using (Bitmap image = (Bitmap)Image.FromStream(this._stream)) {  
  118.                 image.SetResolution(96, 96);  
  119.                 using (MemoryStream ms = new MemoryStream()) {  
  120.                     image.Save(ms, ImageFormat.Jpeg);  
  121.                     this.PrintLogInformation.BarcodeImage = ms.ToArray();  
  122.                 }  
  123.             }  
  124.             LogHelper.AddLog(this.PrintLogInformation);  
  125.             if (this._stream != null) {  
  126.                 this._stream.Close();  
  127.                 this._stream = null;  
  128.             }  
  129.         }  
  130.  
  131.         #endregion  
  132.  
  133.         #region Windows driver print  
  134.   
  135.         private void PrintPage(object sender, PrintPageEventArgs ev) {  
  136.             Bitmap bmp = (Bitmap)Image.FromStream(this._stream);  
  137.             bmp.SetResolution(this._bmpDPI, this._bmpDPI);  
  138.             ev.Graphics.DrawImage(bmp, 0, 0);  
  139.             ev.HasMorePages = false;  
  140.         }  
  141.         /// <summary>  
  142.         /// Print by windows driver  
  143.         /// </summary>  
  144.         /// <param name="printerSettings">.net framework PrinterSettings class, including some printer information</param>  
  145.         /// <param name="bmpDPI">the bitmap image resoluation, dots per inch</param>  
  146.         public void WindowsDriverPrint(PrinterSettings printerSettings, int bmpDPI, DataSet ds) {  
  147.             this._ds = ds;  
  148.             this.Export();  
  149.             if (this._stream == null) {  
  150.                 return;  
  151.             }  
  152.             this._bmpDPI = bmpDPI;  
  153.   
  154.             PrintDocument printDoc = new PrintDocument();  
  155.             printDoc.DocumentName = "条码打印";  
  156.             printDoc.PrinterSettings = printerSettings;  
  157.             printDoc.PrintController = new StandardPrintController();  
  158.             if (!printDoc.PrinterSettings.IsValid) {  
  159.                 if (this._stream != null) {  
  160.                     this._stream.Close();  
  161.                     this._stream = null;  
  162.                 }  
  163.                 MessageBox.Show("Printer found errors, Please contact your administrators！", "Print Error");  
  164.                 return;  
  165.             }  
  166.             printDoc.PrintPage += new PrintPageEventHandler(PrintPage);  
  167.             printDoc.Print();  
  168.             this.SaveLog();  
  169.         }  
  170.  
  171.         #endregion  
  172.  
  173.         #region Original print  
  174.   
  175.         /// <summary>  
  176.         /// Send the file to the printer or use the printer command  
  177.         /// </summary>  
  178.         /// <param name="deviceType">The port(LPT,COM,DRV) which the device connecting</param>  
  179.         /// <param name="copies">Total number for print</param>  
  180.         /// <param name="ds">The report datasource</param>  
  181.         /// <param name="printParam">Print parameters</param>  
  182.         /// <param name="printLanguage">The built-in printer programming language, you can choose EPL or ZPL</param>  
  183.         public void OriginalPrint(DeviceType deviceType,  
  184.             DataSet ds,  
  185.             int copies = 1,  
  186.             string printParam = null,  
  187.             ProgrammingLanguage printLanguage = ProgrammingLanguage.ZPL) {  
  188.             this._ds = ds;  
  189.             this.Export();  
  190.             if (this._stream == null) {  
  191.                 return;  
  192.             }  
  193.             int port = 1;  
  194.             int.TryParse(printParam, out port);  
  195.             int length = (int)this._stream.Length;  
  196.             byte[] bytes = new byte[length];  
  197.             this._stream.Read(bytes, 0, length);  
  198.             ZebraPrintHelper.Copies = copies;  
  199.             ZebraPrintHelper.PrinterType = deviceType;  
  200.             ZebraPrintHelper.PrinterName = printParam;  
  201.             ZebraPrintHelper.Port = port;  
  202.             ZebraPrintHelper.PrinterProgrammingLanguage = printLanguage;  
  203.             ZebraPrintHelper.PrintGraphics(bytes);  
  204.             this.SaveLog();  
  205.         }  
  206.  
  207.         #endregion  
  208.   
  209.     }  
  210. }  



 


技术分享

技术分享

技术分享

 技术分享

技术分享

C#调用斑马打印机打印条码标签(支持COM、LPT、USB、TCP连接方式和ZPL、EPL、CPCL指令)


联系
我们