<Huawei>system-view                         进入配置模式
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname center_switch            更改交换机名

 创建vlan

[center_switch]vlan 40                            

[center_switch-vlan40]quit

给vlan配置IP地址            

[center_switch]interface Vlanif 40        
[center_switch-Vlanif40]ip address 10.10.40.1 255.255.255.0 

 将某个端口加入到vlan中

[center_switch] interface port GigabitEthernet 0/0/24

[center_switch-GigabitEthernet0/0/24]port link-type access

[center_switch-GigabitEthernet0/0/24]port default vlan40

将交换机中一组端口加入到一个VLAN中

 创建vlan

[center_switch]vlan 42

[center_switch-vlan42]quit

 给vlan 配置IP地址

[center_switch]interface Vlanif 42
[center_switch-Vlanif42]ip add 
[center_switch-Vlanif42]ip address 10.10.42.1 255.255.255.0

创建端口组

 [center_switch]port-group port1to8forvlan40

将相应的端口加入组中

[center_switch]port-group port1to8forvlan40]group-member GigabitEthernet 0/0/1 to GigabitEthernet 0/0/8

设置端口方式

[center_switch-port-group-port1to8forvlan42]port link-type access

设置端口组默认vlan(即之前创建好的vlan ID 42)

[center_switch-port-group-port1to8forvlan42]port default vlan 42

[center_switch]display vlan

<center_switch>save

[Quidway] display version
显示VRP版本号 
[Quidway] display current-configuration
显示系统运行配置信息 
[Quidway] display saved-configuration
显示保存的配置信息 
[Quidway] display interfaces brief
显示接口配置信息 
[Quidway]display ip routing-table
显示路由表 
[Quidway]display systname 
命令用来显示路由器的名称

本文出自 “西门庆他小叔” 博客，请务必保留此出处http://718693.blog.51cto.com/708693/1554524

华为S5700划分VLAN