首页 > 代码库 > Linux下配置IP地址的几种方式--------CentOS 6.X

Linux下配置IP地址的几种方式--------CentOS 6.X

2024-07-23 21:43:55 219人阅读

Linux配置IP地址

Linux下一切皆文件，要想配置的参数永久有效基本上要修改配置文件。以下主要讲怎么使用ifconfig，route，ip等命令配置IP地址等相关参数并配置相关配置文件使其永久有效。主要使用CentOS 6系列

重启网络服务

从CentOS 6系列开始系统默认使用 /etc/init.d/NetworkManager脚本管理网络服务。但也可使用/etc/init.d/network来管理。NetworkManager不支持网络桥接等高级功能。以下使用实例

NetworkManager脚本

/etc/init.d/NetworkManager {start|stop|status|restart}

或者

service NetworkManager{start|stop|status|restar}

[root@www ~]# serviceNetworkManager start

Setting network parameters... [ OK ]

Starting NetworkManager daemon:

[root@www ~]# serviceNetworkManager stop

Stopping NetworkManager daemon: [ OK ]

[root@www ~]# serviceNetworkManager restart

Stopping NetworkManager daemon: [ OK ]

Setting network parameters... [ OK ]

Starting NetworkManager daemon: [ OK ]

network脚本

/etc/init.d/network {start|stop|status|restart|reload}

或者

Service network {start|stop|status|restart|reload}

[root@www ~]# servicenetwork stop

Shutting down loopback interface: [ OK ]

[root@www ~]# servicenetwork start

Bringing up loopback interface: [ OK ]

Bringing up interface eth0: [ OK ]

[root@www ~]# servicenetwork restart

Shutting down interface eth0: [ OK ]

Shutting down loopback interface: [ OK ]

Bringing up loopback interface: [ OK ]

Bringing up interface eth0: [ OK ]

[root@www ~]# service network status

Configureddevices:

lo eth0

Currently activedevices:

lo eth0 eth1

[root@www ~]# service network reload

Shutting downinterface eth0: [ OK ]

Shutting downloopback interface: [ OK ]

Bringing uploopback interface: [ OK ]

Bringing upinterface eth0: [ OK ]

ifconfig

ifconfig是最常用的查看及配置IP的命令，使用十分简单。但只是当时有效重启网络服务或者重启计算机即失效

ifconfig 查看启用了的网卡

eth0 Link encap:Ethernet HWaddr 00:0C:29:4F:66:B2

inet addr:192.168.43.2 Bcast:192.168.43.255 Mask:255.255.255.0

inet6 addr: fe80::20c:29ff:fe4f:66b2/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:144 errors:0 dropped:0 overruns:0 frame:0

TX packets:84 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:14976 (14.6 KiB) TXbytes:8234 (8.0 KiB)

lo Link encap:Local Loopback

inetaddr:127.0.0.1 Mask:255.0.0.0

inet6 addr: ::1/128 Scope:Host

UP LOOPBACK RUNNING MTU:16436 Metric:1

RX packets:24 errors:0 dropped:0 overruns:0 frame:0

TX packets:24 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:1560 (1.5 KiB) TXbytes:1560 (1.5 KiB)

ifconfig - a 查看系统所有网卡

eth0 Link encap:Ethernet HWaddr 00:0C:29:4F:66:B2

inet addr:192.168.43.2 Bcast:192.168.43.255 Mask:255.255.255.0

inet6 addr: fe80::20c:29ff:fe4f:66b2/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:866 errors:0 dropped:0 overruns:0 frame:0

TX packets:777 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:75777 (74.0 KiB) TXbytes:66732 (65.1 KiB)

eth1 Link encap:Ethernet HWaddr 00:0C:29:4F:66:BC

BROADCAST MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:0 (0.0 b) TX bytes:0 (0.0b)

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0

inet6 addr: ::1/128 Scope:Host

UP LOOPBACK RUNNING MTU:16436 Metric:1

RX packets:24 errors:0 dropped:0 overruns:0 frame:0

TX packets:24 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:1560 (1.5 KiB) TXbytes:1560 (1.5 KiB)

ifconfig eth*查看单个网卡

[root@www ~]# ifconfigeth0

eth0 Link encap:Ethernet HWaddr 00:0C:29:4F:66:B2

inet addr:192.168.43.2 Bcast:192.168.43.255 Mask:255.255.255.0

inet6 addr: fe80::20c:29ff:fe4f:66b2/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:1255 errors:0 dropped:0 overruns:0 frame:0

TX packets:1154 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:108690 (106.1 KiB) TXbytes:99586 (97.2 KiB)

ifconfig配置临时使用的IP地址

ifconfig是红帽系列系统上的老牌管理命令道7系列这个命令将被废弃改用ip命令配置IP地址这个命令配置管理IP地址简单方便。

ifconfig eth* IP/MASK位数

[root@www ~]# ifconfigeth1 192.168.1.1/24

[root@www ~]# ifconfigeth1

eth1 Link encap:Ethernet HWaddr 00:0C:29:4F:66:BC

inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0

inet6 addr: fe80::20c:29ff:fe4f:66bc/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:6 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:0 (0.0 b) TX bytes:468(468.0 b)

ifconfig eth* [up|down] 启用或者禁用网卡

[root@www ~]# ifconfig lodown

[root@www ~]# ifconfigeth1 down

[root@www ~]# ifconfig

eth0 Link encap:Ethernet HWaddr 00:0C:29:4F:66:B2

inet addr:192.168.43.2 Bcast:192.168.43.255 Mask:255.255.255.0

inet6 addr: fe80::20c:29ff:fe4f:66b2/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:1811 errors:0 dropped:0 overruns:0 frame:0

TX packets:1485 errors:0dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:157057 (153.3 KiB) TXbytes:137398 (134.1 KiB)

route命令配置路由和gateway。

route命令可以查看并配置路由和gateway，

route 查看计算机上的路由条目

[root@www ~]# route

Kernel IP routing table

Destination Gateway Genmask Flags Metric Ref Use Iface

192.168.43.0 * 255.255.255.0 U 0 0 0 eth0

link-local * 255.255.0.0 U 1002 0 0 eth0

default zhaopeng 0.0.0.0 UG 0 0 0 eth0

U代表UP

G代表gateway网关路由

[root@www ~]# route -n

Kernel IP routing table

Destination Gateway Genmask Flags Metric Ref Use Iface

192.168.43.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0

169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0

0.0.0.0 192.168.43.254 0.0.0.0 UG 0 0 0 eth0

route 添加路由条目

route add –net 目标网络/MASK位数 gw 本地网关地址

[root@CentOS ~]# routeadd -net 10.0.0.0/8 gw 192.168.43.1

[root@CentOS ~]# route

Kernel IP routing table

Destination Gateway Genmask Flags Metric Ref Use Iface

192.168.43.0 * 255.255.255.0 U 0 0 0 eth0

10.0.0.0 192.168.43.1 255.0.0.0 UG 0 0 0 eth0

route 删除路由

route del –net Destination网络/MASK位数

[root@CentOS ~]# route -n

Kernel IP routing table

Destination Gateway Genmask Flags Metric Ref Use Iface

192.168.43.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0

10.0.0.0 192.168.43.1 255.0.0.0 UG 0 0 0 eth0

[root@CentOS ~]# routedel -net 10.0.0.0/8

[root@CentOS ~]# route -n

Kernel IP routing table

Destination Gateway Genmask Flags Metric Ref Use Iface

192.168.43.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0

添加及删除默认路由

添加默认路由和删除默认路由都有两种方法。

route add default gw 网关地址或者 routeadd –net 0.0.0.0 gw 网关地址

route deldefault route del –net 0.0.0.0

[root@CentOS ~]# routeadd default gw 192.168.43.1

[root@CentOS ~]# route

Kernel IP routing table

Destination Gateway Genmask Flags Metric Ref Use Iface

192.168.43.0 * 255.255.255.0 U 0 0 0eth0

default 192.168.43.1 0.0.0.0 UG 0 0 0 eth0

[root@CentOS ~]# routedel -net 0.0.0.0

[root@CentOS ~]# route

Kernel IP routing table

Destination Gateway Genmask Flags Metric Ref Use Iface

192.168.43.0 * 255.255.255.0 U 0 0 0 eth0

配置永久的IP和路由

ifconfig route配置的都是临时的只有写在配置文件的参数才会永久有效不会立即生效重启主机或服务有效

IP

ip地址的配置文件vim /etc/sysconfig/network-scripts/ifcfg-eth*

DEVICE=eth0 设备名称一定要与eth*的名字匹配

HWADDR=00:0C:29:57:5C:BB 网卡的MAC地址

TYPE=Ethernet 类型

ONBOOT=yes 开机是否激活此接口

NM_CONTROLLED=yes

BOOTPROTO=static 引导协议 3个选项{static|none|dhcp}static和none表示使用静态地址

IPADDR=192.168.1.112 IP地址

NETAMSK=255.255.255.0 子网掩码

GETWAY=192.168.1.1 网关地址

DNS1=61.128.128.68 DNS服务器地址

route路由

路由的配置文件vim /etc/sysconfig/network-scripts/route-eth*

Destination/mask位数 via nexthop

192.168.1.0/24 via 192.168.1.1

添加默认路由

default via 192.168.1.1

0.0.0.0/0 via 192.168.1.1

DNS指向

[root@CentOS ~]# cat /etc/resolv.conf DNS配置文件但是建议直接写在/etc/sysconfig/network-scripts/ifcfg-eth*文件中

# Generated by NetworkManager

# No nameservers found; try putting DNSservers into your

# ifcfg files in/etc/sysconfig/network-scripts like so:

# DNS1=xxx.xxx.xxx.xxx

# DNS2=xxx.xxx.xxx.xxx

# DOMAIN=lab.foo.com bar.foo.com

nameserver 61.128.128.68 ：命名规则

setup配置ip dns等信息

直接输入setup命令

IP命令的使用

重启计算机就将失效，重启网络服务不会失效。

ip link

ip link show 查看网络接口信息

ip link show [dev]

[root@CentOS ~]# ip linkshow

1: lo: <LOOPBACK,UP,LOWER_UP> mtu16436 qdisc noqueue state UNKNOWN

link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

2: eth0:<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen1000

link/ether 00:0c:29:57:5c:bb brd ff:ff:ff:ff:ff:ff

[root@CentOS ~]# ip linkshow eth0

2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP>mtu 1500 qdisc pfifo_fast state UP qlen 1000

link/ether 00:0c:29:57:5c:bb brd ff:ff:ff:ff:ff:ff

ip –s link show [dev] 查看接口收发了多少包

[root@CentOS ~]# ip -s link show eth0

2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500qdisc pfifo_fast state UP qlen 1000

link/ether00:0c:29:57:5c:bb brd ff:ff:ff:ff:ff:ff

RX: bytes packets errors dropped overrun mcast

185812 2152 0 0 0 0

TX: bytes packets errors dropped carrier collsns

128240 1187 0 0 0 0

ip link set [dev] [up|down]

[root@www ~]# ip link set eth1 down

[root@www ~]# ip link show

1: lo:<LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN

link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

2: eth0:<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen1000

link/ether 00:0c:29:4f:66:b2 brdff:ff:ff:ff:ff:ff

3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdiscpfifo_fast state DOWN qlen 1000

link/ether 00:0c:29:4f:66:bcbrd ff:ff:ff:ff:ff:ff

ip addr

ip aadr show [dev] 查看ip地址
ip addr add IP/mask位数 dev eth* 添加ip地址

[root@www ~]# ip addr add10.1.1.1/8 dev eth1

[root@www ~]# ip addrshow eth1

3: eth1: <BROADCAST,MULTICAST> mtu1500 qdisc pfifo_fast state DOWN qlen 1000

link/ether 00:0c:29:4f:66:bc brd ff:ff:ff:ff:ff:ff

inet 10.1.1.1/8 scope global eth1

ip addr del address dev eth*

[root@www ~]# ip addr del 10.1.1.1/8 deveth1

ip addr flush [dev] to ip/mask位数

[root@www ~]# ip addr show eth1

3: eth1: <BROADCAST,MULTICAST> mtu1500 qdisc pfifo_fast state DOWN qlen 1000

link/ether 00:0c:29:4f:66:bc brd ff:ff:ff:ff:ff:ff

inet 192.168.100.1/24 scope global eth1

inet 10.2.2.2/8 scope global eth1

[root@www ~]# ip addrflush eth1 to 10/8

[root@www ~]# ip addrshow eth1

3: eth1: <BROADCAST,MULTICAST> mtu1500 qdisc pfifo_fast state DOWN qlen 1000

link/ether 00:0c:29:4f:66:bc brd ff:ff:ff:ff:ff:ff

inet 192.168.100.1/24scope global eth1

ip route

ip route add to destination网络/mask位数 dev eth*via 网关地址

[root@CentOS ~]# ip routeadd to 192.168.100.0/24 dev eth0 via 192.168.43.1

[root@CentOS ~]# ip routeshow

192.168.100.0/24 via 192.168.43.1 dev eth0

192.168.43.0/24 dev eth0 proto kernel scope link src 192.168.43.3

总结：

ifconfig和route配置十分简单配置很容易功能比较单一，ip命令是属于iproute2软件包中的一个强大的网络配置工具功能十分强悍建议学习使用ip命令。

下载此文档的下载地址：http://down.51cto.com/data/1875820

本文出自 “LoveFish” 博客，请务必保留此出处http://mictiger.blog.51cto.com/4854014/1557098

Linux下配置IP地址的几种方式--------CentOS 6.X

声明：以上内容来自用户投稿及互联网公开渠道收集整理发布，本网站不拥有所有权，未作人工编辑处理，也不承担相关法律责任，若内容有误或涉及侵权可进行投诉：投诉/举报工作人员会在5个工作日内联系你，一经查实，本站将立刻删除涉嫌侵权内容。

联系
我们

首页 > 代码库 > Linux下配置IP地址的几种方式--------CentOS 6.X

Linux下配置IP地址的几种方式--------CentOS 6.X

NetworkManager脚本

network脚本

ifconfig 查看启用了的网卡

ifconfig - a 查看系统所有网卡

ifconfig eth*查看单个网卡

ifconfig配置临时使用的IP地址

ifconfig eth* IP/MASK位数

ifconfig eth* [up|down] 启用或者禁用网卡

route命令配置路由和gateway。

route 查看计算机上的路由条目

route 添加路由条目

route 删除路由

添加及删除默认路由

配置永久的IP和路由

IP

route路由

DNS指向

setup配置ip dns等信息

IP命令的使用

ip link

ip link show 查看网络接口信息

ip addr

ip route

看完仍有疑问？有类似问题直接问程序猿