首页 > 代码库 > asav931 ipv6 配置 nat-pt
asav931 ipv6 配置 nat-pt
1、环境准备:
asav 9.31
vcenter 6.0
2、拓扑
3、配置asa
interface GigabitEthernet0/0 nameif outside security-level 0 ip address 192.168.1.100 255.255.255.0 interface GigabitEthernet0/1 nameif inside security-level 100 no ip address ipv6 address fec0::/64 eui-64 route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 object network ipv4_outside_network subnet 0.0.0.0 0.0.0.0 object network ipv6_outside_mapped subnet 201b::/96 object network ipv4_outside_network nat (outside,inside) static ipv6_outside_mapped dns object network ipv6_inside_network subnet fec0::/64 nat (inside,outside) dynamic interface
4、配置pc
DNS: 201b::df05:505--->201b::/94 加上 223.5.5.5
任意ipv4在转换为ipv6时,是将ipv4转换成十六进制后再加上201b::/94前缀
参考链接:
http://geenetworks.tumblr.com/post/35363923666/cisco-asa-90-nat64-implemetation
https://wenku.baidu.com/view/1f1fc0f8cc7931b764ce154a.html
http://7658423.blog.51cto.com/7648423/1335926
本文出自 “武陵荒草” 博客,请务必保留此出处http://penguintux.blog.51cto.com/3021117/1911055
asav931 ipv6 配置 nat-pt
声明:以上内容来自用户投稿及互联网公开渠道收集整理发布,本网站不拥有所有权,未作人工编辑处理,也不承担相关法律责任,若内容有误或涉及侵权可进行投诉: 投诉/举报 工作人员会在5个工作日内联系你,一经查实,本站将立刻删除涉嫌侵权内容。