将原来的ubuntu虚拟机文件迁移到另一台机子之后。

ifconfig显示只有一个lo网卡，网上找了一些文章，大多是修改/etc/network/interfaces

原来内容是

# #######################################################
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet dhcp

# #######################################################

将eth0改为静态ip

# #######################################################

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.60.218
gateway 192.168.60.1
netmask 255.255.255.0

# #######################################################

reboot后执行ifconfig，仍然只显示lo，找不到eth0

无意中执行ifconfig -a，显示有eth1,eth2和lo。

于是修改/etc/network/interfaces，将原来的eth0修改为eth1

# #######################################################

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth1
iface eth1 inet static
address 192.168.60.218
gateway 192.168.60.1
netmask 255.255.255.0

# #######################################################

reboot后，ifconfig终于显示eth1，熟悉的网络又回来了。这里简单记录一下，以免下次再次遇到。

vmware虚拟机迁移导致的eth0消失问题