首页 > 代码库 > CentOS 7 运行级别切换
CentOS 7 运行级别切换
CentOS 7 之前的版本是通过 /etc/inittab 文件来定义系统运行级别:
[sywu@wusuyuan ~]$ cat /etc/centos-release CentOS release 6.4 (Final) [sywu@wusuyuan ~]$ cat /etc/inittab # inittab is only used by upstart for the default runlevel. # # ADDING OTHER CONFIGURATION HERE WILL HAVE NO EFFECT ON YOUR SYSTEM. # # System initialization is started by /etc/init/rcS.conf # # Individual runlevels are started by /etc/init/rc.conf # # Ctrl-Alt-Delete is handled by /etc/init/control-alt-delete.conf # # Terminal gettys are handled by /etc/init/tty.conf and /etc/init/serial.conf, # with configuration in /etc/sysconfig/init. # # For information on how to write upstart event handlers, or how # upstart works, see init(5), init(8), and initctl(8). # # Default runlevel. The runlevels used are: # 0 - halt (Do NOT set initdefault to this) # 1 - Single user mode # 2 - Multiuser, without NFS (The same as 3, if you do not have networking) # 3 - Full multiuser mode # 4 - unused # 5 - X11 # 6 - reboot (Do NOT set initdefault to this) # id:3:initdefault: [sywu@wusuyuan ~]$
CentOS 7 版本不再使用该文件定义系统运行级别,相关运行级别设置无效:
[sywu@c1-11r2-rac1 etc]$ cat /etc/centos-release CentOS Linux release 7.0.1406 (Core) [sywu@c1-11r2-rac1 etc]$ cat /etc/inittab # inittab is no longer used when using systemd. # # ADDING CONFIGURATION HERE WILL HAVE NO EFFECT ON YOUR SYSTEM. # # Ctrl-Alt-Delete is handled by /etc/systemd/system/ctrl-alt-del.target # # systemd uses ‘targets‘ instead of runlevels. By default, there are two main targets: # # multi-user.target: analogous to runlevel 3 # graphical.target: analogous to runlevel 5 # # To set a default target, run: # # ln -sf /lib/systemd/system/<target name>.target /etc/systemd/system/default.target # id:3:initdefault: #无效 [sywu@c1-11r2-rac1 etc]$
新版本的运行级别都定义在 /lib/systemd/system下:
[sywu@c1-11r2-rac1 system]$ ls -ltr /lib/systemd/system/runlevel* lrwxrwxrwx. 1 root root 13 7月 30 14:22 /lib/systemd/system/runlevel1.target -> rescue.target lrwxrwxrwx. 1 root root 15 7月 30 14:22 /lib/systemd/system/runlevel0.target -> poweroff.target lrwxrwxrwx. 1 root root 17 7月 30 14:22 /lib/systemd/system/runlevel2.target -> multi-user.target lrwxrwxrwx. 1 root root 17 7月 30 14:22 /lib/systemd/system/runlevel3.target -> multi-user.target lrwxrwxrwx. 1 root root 17 7月 30 14:22 /lib/systemd/system/runlevel4.target -> multi-user.target lrwxrwxrwx. 1 root root 16 7月 30 14:22 /lib/systemd/system/runlevel5.target -> graphical.target lrwxrwxrwx. 1 root root 13 7月 30 14:22 /lib/systemd/system/runlevel6.target -> reboot.target
可以针对不同需要设置不同的运行级别:
如设置命令行级别(init 3)方法:
ln -sf /lib/systemd/system/runlevel3.target /etc/systemd/system/default.target 或 ln -sf /lib/systemd/system/multi-user.target /etc/systemd/system/default.target 或 systemctl set-default multi-user.target
设置窗口级别(init 5)方法:
ln -sf /lib/systemd/system/runlevel5.target /etc/systemd/system/default.target 或 ln -sf /lib/systemd/system/graphical.target /etc/systemd/system/default.target 或 systemctl set-default graphical.target
-----------------------------分割线-----------------------------
修改系统运行级别：
1、systemd使用比sysvinit的运行级更为自由的target替代。第3运行级用multi-user.target替代。第5运行级用graphical.target替代。runlevel3.target和runlevel5.target分别是指向 multi-user.target和graphical.target的符号链接。
可以使用下面的命令切换到“运行级别3 ”：
systemctl isolate multi-user.target或systemctl isolate runlevel3.target
可以使用下面的命令切换到“运行级别5 ”：
systemctl isolate graphical.target或systemctl isolate runlevel5.target
2、如何改变默认运行级别？
systemd使用链接来指向默认的运行级别。在创建新的链接前，可以通过下面命令删除存在的链接： rm /etc/systemd/system/default.target
默认启动运行级别3 ：
ln -sf /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
默认启动运行级别5 ：
ln -sf /lib/systemd/system/graphical.target/etc/systemd/system/default.target
systemd不使用/etc/inittab文件。
-----------------------------分割线-----------------------------
如何查看当前运行级别？
旧的runlevel命令在systemd下仍然可以使用。可以继续使用它，尽管systemd使用 ‘target’ 概念(多个的 ‘target’ 可以同时激活)替换了之前系统的runlevel。
等价的systemd命令是systemctl list-units –type=target
CentOS 7 运行级别切换