-A INPUT -m state –state NEW -m tcp -p tcp –dport 80 -j ACCEPT（允许80端口通过防火墙） 
    -A INPUT -m state –state NEW -m tcp -p tcp –dport 3306 -j ACCEPT（允许3306端口通过防火墙） 
    特别提示：很多网友把这两条规则添加到防火墙配置的最后一行，导致防火墙启动失败，正确的应该是添加到默认的22端口这条规则的下面

添加好之后防火墙规则如下所示：

###################################### 
# Firewall configuration written by system-config-firewall 
# Manual customization of this file is not recommended. 
*filter 
:INPUT ACCEPT [0:0] 
:FORWARD ACCEPT [0:0] 
:OUTPUT ACCEPT [0:0] 
-A INPUT -m state –state ESTABLISHED,RELATED -j ACCEPT 
-A INPUT -p icmp -j ACCEPT 
-A INPUT -i lo -j ACCEPT 
-A INPUT -m state –state NEW -m tcp -p tcp –dport 22 -j ACCEPT 
-A INPUT -m state –state NEW -m tcp -p tcp –dport 80 -j ACCEPT 
-A INPUT -m state –state NEW -m tcp -p tcp –dport 3306 -j ACCEPT 
-A INPUT -j REJECT –reject-with icmp-host-prohibited 
-A FORWARD -j REJECT –reject-with icmp-host-prohibited 
COMMIT 
#######################################

/etc/init.d/iptables restart  #最后重启防火墙使配置生效