查看数据库的SQL 1、查看表空间的名称及大小
select t.tablespace_name, round(sum(bytes/(1024*1024)),0) ts_size
from dba_tablespaces t, dba_data_files d
where t.tablespace_name = d.tablespace_name
group by t.tablespace_name;
2、查看表空间物理文件的名称及大小
select tablespace_name, file_id, file_name,
round(bytes/(1024*1024),0) total_space
from dba_data_files
order by tablespace_name;
3、查看回滚段名称及大小
select segment_name, tablespace_name, r.status,
(initial_extent/1024) InitialExtent,(next_extent/1024) NextExtent,
max_extents, v.curext CurExtent
From dba_rollback_segs r, v$rollstat v
Where r.segment_id = v.usn(+)
order by segment_name ;
4、查看控制文件
select name from v$controlfile;
5、查看日志文件
select member from v$logfile;
6、查看表空间的使用情况
select sum(bytes)/(1024*1024) as free_space,tablespace_name
from dba_free_space
group by tablespace_name;
SELECT A.TABLESPACE_NAME,A.BYTES TOTAL,B.BYTES USED, C.BYTES FREE,
(B.BYTES*100)/A.BYTES "% USED",(C.BYTES*100)/A.BYTES "% FREE"
FROM SYS.SM$TS_AVAIL A,SYS.SM$TS_USED B,SYS.SM$TS_FREE C
WHERE A.TABLESPACE_NAME=B.TABLESPACE_NAME AND A.TABLESPACE_NAME=C.TABLESPACE_NAME;
7、查看数据库库对象
select owner, object_type, status, count(*) count# from all_objects group by owner, object_type, status;
8、查看数据库的版本
Select version FROM Product_component_version
Where SUBSTR(PRODUCT,1,6)=‘Oracle‘;
9、查看数据库的创建日期和归档方式
Select Created, Log_Mode, Log_Mode From V$Database; 性能检测sql 1. 监控事例的等待
select event,sum(decode(wait_Time,0,0,1)) "Prev",
sum(decode(wait_Time,0,1,0)) "Curr",count(*) "Tot"
from v$session_Wait
group by event order by 4;
2. 回滚段的争用情况
select name, waits, gets, waits/gets "Ratio"
from v$rollstat a, v$rollname b
where a.usn = b.usn;
3. 监控表空间的 I/O 比例
select df.tablespace_name name,df.file_name "file",f.phyrds pyr,
f.phyblkrd pbr,f.phywrts pyw, f.phyblkwrt pbw
from v$filestat f, dba_data_files df
where f.file# = df.file_id
order by df.tablespace_name;
4. 监控文件系统的 I/O 比例
select substr(a.file#,1,2) "#", substr(a.name,1,30) "Name",
a.status, a.bytes, b.phyrds, b.phywrts
from v$datafile a, v$filestat b
where a.file# = b.file#;
5.在某个用户下找所有的索引
select user_indexes.table_name, user_indexes.index_name,uniqueness, column_name
from user_ind_columns, user_indexes
where user_ind_columns.index_name = user_indexes.index_name
and user_ind_columns.table_name = user_indexes.table_name
order by user_indexes.table_type, user_indexes.table_name,
user_indexes.index_name, column_position;
6. 监控 SGA 的命中率
select a.value + b.value "logical_reads", c.value "phys_reads",
round(100 * ((a.value+b.value)-c.value) / (a.value+b.value)) "BUFFER HIT RATIO"
from v$sysstat a, v$sysstat b, v$sysstat c
where a.statistic# = 38 and b.statistic# = 39
and c.statistic# = 40;
7. 监控 SGA 中字典缓冲区的命中率
select parameter, gets,Getmisses , getmisses/(gets+getmisses)*100 "miss ratio",
(1-(sum(getmisses)/ (sum(gets)+sum(getmisses))))*100 "Hit ratio"
from v$rowcache
where gets+getmisses <>0
group by parameter, gets, getmisses;
8. 监控 SGA 中共享缓存区的命中率，应该小于1%
select sum(pins) "Total Pins", sum(reloads) "Total Reloads",
sum(reloads)/sum(pins) *100 libcache
from v$librarycache;
select sum(pinhits-reloads)/sum(pins) "hit radio",sum(reloads)/sum(pins) "reload percent"
from v$librarycache;
9. 显示所有数据库对象的类别和大小
select count(name) num_instances ,type ,sum(source_size) source_size ,
sum(parsed_size) parsed_size ,sum(code_size) code_size ,sum(error_size) error_size,
sum(source_size) +sum(parsed_size) +sum(code_size) +sum(error_size) size_required
from dba_object_size
group by type order by 2;
10. 监控 SGA 中重做日志缓存区的命中率，应该小于1%
SELECT name, gets, misses, immediate_gets, immediate_misses,
Decode(gets,0,0,misses/gets*100) ratio1,
Decode(immediate_gets+immediate_misses,0,0,
immediate_misses/(immediate_gets+immediate_misses)*100) ratio2
FROM v$latch WHERE name IN (‘redo allocation‘, ‘redo copy‘);
11. 监控内存和硬盘的排序比率，最好使它小于 .10，增加 sort_area_size
SELECT name, value FROM v$sysstat WHERE name IN (‘sorts (memory)‘, ‘sorts (disk)‘);
12. 监控当前数据库谁在运行什么SQL语句
SELECT osuser, username, sql_text from v$session a, v$sqltext b
where a.sql_address =b.address order by address, piece;
13. 监控字典缓冲区
SELECT (SUM(PINS - RELOADS)) / SUM(PINS) "LIB CACHE" FROM V$LIBRARYCACHE;
SELECT (SUM(GETS - GETMISSES - USAGE - FIXED)) / SUM(GETS) "ROW CACHE" FROM V$ROWCACHE;
SELECT SUM(PINS) "EXECUTIONS", SUM(RELOADS) "CACHE MISSES WHILE EXECUTING" FROM V$LIBRARYCACHE;
后者除以前者,此比率小于1%,接近0%为好。
SELECT SUM(GETS) "DICTIONARY GETS",SUM(GETMISSES) "DICTIONARY CACHE GET MISSES"
FROM V$ROWCACHE
14. 找ORACLE字符集
select * from sys.props$ where name=‘NLS_CHARACTERSET‘;
15. 监控 MTS
select busy/(busy+idle) "shared servers busy" from v$dispatcher;
此值大于0.5时，参数需加大
select sum(wait)/sum(totalq) "dispatcher waits" from v$queue where type=‘dispatcher‘;
select count(*) from v$dispatcher;
select servers_highwater from v$mts;
servers_highwater接近mts_max_servers时，参数需加大
16. 碎片程度
select tablespace_name,count(tablespace_name) from dba_free_space group by tablespace_name
having count(tablespace_name)>10;
alter tablespace name coalesce;
alter table name deallocate unused;
create or replace view ts_blocks_v as
select tablespace_name,block_id,bytes,blocks,‘free space‘ segment_name from dba_free_space
union all
select tablespace_name,block_id,bytes,blocks,segment_name from dba_extents;
select * from ts_blocks_v;
select tablespace_name,sum(bytes),max(bytes),count(block_id) from dba_free_space
group by tablespace_name;
查看碎片程度高的表
SELECT segment_name table_name , COUNT(*) extents
FROM dba_segments WHERE owner NOT IN (‘SYS‘, ‘SYSTEM‘) GROUP BY segment_name
HAVING COUNT(*) = (SELECT MAX( COUNT(*) ) FROM dba_segments GROUP BY segment_name);
17. 表、索引的存储情况检查
select segment_name,sum(bytes),count(*) ext_quan from dba_extents where
tablespace_name=‘&tablespace_name‘ and segment_type=‘TABLE‘ group by tablespace_name,segment_name;
select segment_name,count(*) from dba_extents where segment_type=‘INDEX‘ and owner=‘&owner‘
group by segment_name;
18、找使用CPU多的用户session
12是cpu used by this session
select a.sid,spid,status,substr(a.program,1,40) prog,a.terminal,osuser,value/60/100 value
from v$session a,v$process b,v$sesstat c
where c.statistic#=12 and c.sid=a.sid and a.paddr=b.addr order by value desc; DBA必读脚本（转） --监控索引是否使用
alter index &index_name monitoring usage;
alter index &index_name nomonitoring usage;
select *
from v$object_usage
where index_name = &index_name; --求数据文件的I/O分布
select df.name,phyrds,phywrts,phyblkrd,phyblkwrt,singleblkrds,readtim,writetim
from v$filestat fs,v$dbfile df
where fs.file#=df.file# order by df.name; --求某个隐藏参数的值
col ksppinm format a54
col ksppstvl format a54
select ksppinm, ksppstvl
from x$ksppi pi, x$ksppcv cv
where cv.indx=pi.indx and pi.ksppinm like ‘_%‘ escape ‘‘ and pi.ksppinm like ‘%¶meer%‘; --求系统中较大的latch
select name,sum(gets),sum(misses),sum(sleeps),sum(wait_time)
from v$latch_children
group by name having sum(gets) > 50 order by 2; --求归档日志的切换频率(生产系统可能时间会很长)
select start_recid,start_time,end_recid,end_time,minutes from (select test.*, rownum as rn
from (select b.recid start_recid,to_char(b.first_time,‘yyyy-mm-dd hh24:mi:ss‘) start_time,
a.recid end_recid,to_char(a.first_time,‘yyyy-mm-dd hh24:mi:ss‘) end_time,round(((a.first_time-b.first_time)*24)*60,2) minutes
from v$log_history a,v$log_history b where a.recid=b.recid+1 and b.first_time > sysdate - 1
order by a.first_time desc) test) y where y.rn < 30
--求回滚段正在处理的事务
select a.name,b.xacts,c.sid,c.serial#,d.sql_text
from v$rollname a,v$rollstat b,v$session c,v$sqltext d,v$transaction e
where a.usn=b.usn and b.usn=e.xidusn and c.taddr=e.addr
and c.sql_address=d.address and c.sql_hash_value=http://www.mamicode.com/d.hash_value order by> --求出无效的对象
select ‘alter procedure ‘||object_name||‘ compile;‘
from dba_objects
where status=‘INVALID‘ and ōwner=‘&‘ and object_type in (‘PACKAGE‘,‘PACKAGE BODY‘);
/
select owner,object_name,object_type,status from dba_objects where status=‘INVALID‘; --求process/session的状态
select p.pid,p.spid,s.program,s.sid,s.serial#
from v$process p,v$session s where s.paddr=p.addr; --求当前session的状态
select sn.name,ms.value
from v$mystat ms,v$statname sn
where ms.statistic#=sn.statistic# and ms.value > 0; --求表的索引信息
select ui.table_name,ui.index_name
from user_indexes ui,user_ind_columns uic
where ui.table_name=uic.table_name and ui.index_name=uic.index_name
and ui.table_name like ‘&table_name%‘ and uic.column_name=‘&column_name‘; --显示表的外键信息
col search_condition format a54
select table_name,constraint_name
from user_constraints
where constraint_type =‘R‘ and constraint_name in (select constraint_name from user_cons_columns where column_name=‘&1‘); select rpad(child.table_name,25,‘ ‘) child_tablename,
rpad(cp.column_name,17,‘ ‘) referring_column,rpad(parent.table_name,25,‘ ‘) parent_tablename,
rpad(pc.column_name,15,‘ ‘) referred_column,rpad(child.constraint_name,25,‘ ‘) constraint_name
from user_constraints child,user_constraints parent,
user_cons_columns cp,user_cons_columns pc
where child.constraint_type = ‘R‘ and child.r_constraint_name = parent.constraint_name and
child.constraint_name = cp.constraint_name and parent.constraint_name = pc.constraint_name and
cp.position = pc.position and child.table_name =‘&table_name‘
order by child.owner,child.table_name,child.constraint_name,cp.position; --显示表的分区及子分区(user_tab_subpartitions)
col table_name format a16
col partition_name format a16
col high_value format a81
select table_name,partition_name,HIGH_VALUE from user_tab_partitions where table_name=‘&table_name‘ --使用dbms_xplan生成一个执行计划
explain plan set statement_id = ‘&sql_id‘ for &sql;
select * from table(dbms_xplan.display); --求某个事务的重做信息(bytes)
select s.name,m.value
from v$mystat m,v$statname s
where m.statistic#=s.statistic# and s.name like ‘%redo size%‘; --求cache中缓存超过其5%的对象
select o.owner,o.object_type,o.object_name,count(b.objd)
from v$bh b,dba_objects o
where b.objd = o.object_id
group by o.owner,o.object_type,o.object_name
having count(b.objd) > (select to_number(value)*0.05 from v$parameter where name = ‘db_block_buffers‘); --求谁阻塞了某个session(10g)
select sid, username, event, blocking_session,
seconds_in_wait, wait_time
from v$session where state in (‘WAITING‘) and wait_class != ‘Idle‘; --求session的OS进程ID
col program format a54
select p.spid "OS Thread", b.name "Name-User", s.program
from v$process p, v$session s, v$bgprocess b
where p.addr = s.paddr and p.addr = b.paddr
UNION ALL
select p.spid "OS Thread", s.username "Name-User", s.program
from v$process p, v$session s where p.addr = s.paddr and s.username is not null; --查会话的阻塞
col user_name format a32
select /*+ rule */ lpad(‘ ‘,decode(l.xidusn ,0,3,0))||l.oracle_username user_name, o.owner,o.object_name,s.sid,s.serial#
from v$locked_object l,dba_objects o,v$session s
where l.object_id=o.object_id and l.session_id=s.sid order by o.object_id,xidusn desc ; col username format a15
col lock_level format a8
col owner format a18
col object_name format a32
select /*+ rule */ s.username, decode(l.type,‘tm‘,‘table lock‘, ‘tx‘,‘row lock‘, null) lock_level, o.owner,o.object_name,s.sid,s.serial#
from v$session s,v$lock l,dba_objects o
where l.sid = s.sid and l.id1 = o.object_id(+) and s.username is not null ; --求等待的事件及会话信息/求会话的等待及会话信息
select se.sid,s.username,se.event,se.total_waits,se.time_waited,se.average_wait
from v$session s,v$session_event se
where s.username is not null and se.sid=s.sid and s.status=‘ACTIVE‘ and se.event not like ‘%SQL*Net%‘ order by s.username; select s.sid,s.username,sw.event,sw.wait_time,sw.state,sw.seconds_in_wait
from v$session s,v$session_wait sw
where s.username is not null and sw.sid=s.sid and sw.event not like ‘%SQL*Net%‘ order by s.username; --求会话等待的file_id/block_id
col event format a24
col p1text format a12
col p2text format a12
col p3text format a12
select sid,event,p1text, p1, p2text, p2, p3text, p3
from v$session_wait
where event not like ‘%SQL%‘ and event not like ‘%rdbms%‘ and event not like ‘%mon%‘ order by event; select name,wait_time from v$latch l where exists (select 1 from (select sid,event,p1text, p1, p2text, p2, p3text, p3
from v$session_wait
where event not like ‘%SQL%‘ and event not like ‘%rdbms%‘ and event not like ‘%mon%‘
) x where x.p1= l.latch#); --求会话等待的对象
col owner format a18
col segment_name format a32
col segment_type format a32
select owner,segment_name,segment_type
from dba_extents
where file_id = &file_id and &block_id between block_id and block_id + blocks - 1; --求buffer cache中的块信息
select o.OBJECT_TYPE, substr(o.OBJECT_NAME,1,10) objname , b.objd , b.status, count(b.objd)
from v$bh b, dba_objects o
where b.objd = o.data_object_id and o.owner = ‘&1‘ group by o.object_type, o.object_name,b.objd, b.status ; --求日志文件的空间使用
select le.leseq current_log_sequence#, 100*cp.cpodr_bno/le.lesiz percentage_full
from x$kcccp cp,x$kccle le
where le.leseq =cp.cpodr_seq; --求等待中的对象
select /*+rule */ s.sid, s.username, w.event, o.owner, o.segment_name, o.segment_type,
o.partition_name, w.seconds_in_wait seconds, w.state
from v$session_wait w, v$session s, dba_extents o
where w.event in (select name from v$event_name where parameter1 = ‘file#‘
and parameter2 = ‘block#‘ and name not like ‘control%‘)
and o.owner <> ‘sys‘ and w.sid = s.sid and w.p1 = o.file_id and w.p2 >= o.block_id and w.p2 < o.block_id + o.blocks --求当前事务的重做尺寸
select value
from v$mystat, v$statname
where v$mystat.statistic# = v$statname.statistic# and v$statname.name = ‘redo size‘; --唤醒smon去清除临时段
column pid new_value Smon
set termout off
select p.pid from sys.v_$bgprocess b,sys.v_$process p where b.name = ‘SMON‘ and p.addr = b.paddr
/
set termout on
oradebug wakeup &Smon
undefine Smon --求回退率
select b.value/(a.value + b.value),a.value,b.value from v$sysstat a,v$sysstat b
where a.statistic#=4 and b.statistic#=5; --求DISK READ较多的SQL
select st.sql_text from v$sql s,v$sqltext st
where s.address=st.address and s.hash_value=http://www.mamicode.com/st.hash_value and s.disk_reads> --求DISK SORT严重的SQL
select sess.username, sql.sql_text, sort1.blocks
from v$session sess, v$sqlarea sql, v$sort_usage sort1
where sess.serial# = sort1.session_num
and sort1.sqladdr = sql.address
and sort1.sqlhash = sql.hash_value and sort1.blocks > 200; --求对象的创建代码
column column_name format a36
column sql_text format a99
select dbms_metadata.get_ddl(‘TABLE‘,‘&1‘) from dual;
select dbms_metadata.get_ddl(‘INDEX‘,‘&1‘) from dual; --求表的索引
set linesize 131
select a.index_name,a.column_name,b.status, b.index_type
from user_ind_columns a,user_indexes b
where a.index_name=b.index_name and a.table_name=‘&1‘; 求索引中行数较多的
select index_name,blevel,num_rows,CLUSTERING_FACTOR,status from user_indexes where num_rows > 10000 and blevel > 0
select table_name,index_name,blevel,num_rows,CLUSTERING_FACTOR,status from user_indexes where status <> ‘VALID‘ --求当前会话的SID，SERIAL#
select sid, serial# from v$session where audsid = SYS_CONTEXT(‘USERENV‘,‘SESSIONID‘); --求表空间的未用空间
col mbytes format 9999.9999
select tablespace_name,sum(bytes)/1024/1024 mbytes from dba_free_space group by tablespace_name; --求表中定义的触发器
select table_name,index_type,index_name,uniqueness from user_indexes where table_name=‘&1‘;
select trigger_name from user_triggers where table_name=‘&1‘; --求未定义索引的表
select table_name from user_tables where table_name not in (select table_name from user_ind_columns); --执行常用的过程
exec print_sql(‘select count(*) from tab‘);
exec show_space2(‘table_name‘); --求free memory
select * from v$sgastat where name=‘free memory‘;
select a.name,sum(b.value) from v$statname a,v$sesstat b where a.statistic# = b.statistic# group by a.name; 查看一下谁在使用那个可以得回滚段，或者查看一下某个可以得用户在使用回滚段，找出领回滚段不断增长的事务，再看看如何处理它，是否可以将它commit，再不行就看看能否kill它，等等, 查看当前正在使用的回滚段的用户信息和回滚段信息:
set linesize 121
SELECT r.name "ROLLBACK SEGMENT NAME ",l.sid "ORACLE PID",p.spid "SYSTEM PID ",s.username "ORACLE USERNAME"
FROM v$lock l, v$process p, v$rollname r, v$session s
WHERE l.sid = p.pid(+) AND s.sid=l.sid AND TRUNC(l.id1(+)/65536) = r.usn AND l.type(+) = ‘TX‘ AND l.lmode(+) = 6 ORDER BY r.name; --查看用户的回滚段的信息
select s.username, rn.name from v$session s, v$transaction t, v$rollstat r, v$rollname rn
where s.saddr = t.ses_addr and t.xidusn = r.usn and r.usn = rn.usn --生成执行计划
explain plan set statement_id=‘a1‘ for &1;
--查看执行计划
select lpad(‘ ‘,2*(level-1))||operation operation,options,OBJECT_NAME,position from plan_table
start with id=0 and statement_id=‘a1‘ connect by prior id=parent_id and statement_id=‘a1‘ --查看内存中存的使用
select decode(greatest(class,10),10,decode(class,1,‘Data‘,2,‘Sort‘,4,‘Header‘,to_char(class)),‘Rollback‘) "Class",
sum(decode(bitand(flag,1),1,0,1)) "Not Dirty",sum(decode(bitand(flag,1),1,1,0)) "Dirty",
sum(dirty_queue) "On Dirty",count(*) "Total"
from x$bh group by decode(greatest(class,10),10,decode(class,1,‘Data‘,2,‘Sort‘,4,‘Header‘,to_char(class)),‘Rollback‘); -- 查看表空间状态
select tablespace_name,extent_management,segment_space_management from dba_tablespaces;
select table_name,freelists,freelist_groups from user_tables; --查看系统请求情况
SELECT DECODE (name, ‘summed dirty write queue length‘, value)/
DECODE (name, ‘write requests‘, value) "Write Request Length"
FROM v$sysstat WHERE name IN ( ‘summed dirty queue length‘, ‘write requests‘) and value>0; --计算data buffer 命中率
select a.value + b.value "logical_reads", c.value "phys_reads",
round(100 * ((a.value+b.value)-c.value) / (a.value+b.value)) "BUFFER HIT RATIO"
from v$sysstat a, v$sysstat b, v$sysstat c
where a.statistic# = 40 and b.statistic# = 41 and c.statistic# = 42; SELECT name, (1-(physical_reads/(db_block_gets+consistent_gets)))*100 H_RATIO FROM v$buffer_pool_statistics; --查看内存使用情况
select least(max(b.value)/(1024*1024),sum(a.bytes)/(1024*1024)) shared_pool_used,
max(b.value)/(1024*1024) shared_pool_size,greatest(max(b.value)/(1024*1024),sum(a.bytes)/(1024*1024))-
(sum(a.bytes)/(1024*1024)) shared_pool_avail,((sum(a.bytes)/(1024*1024))/(max(b.value)/(1024*1024)))*100 avail_pool_pct
from v$sgastat a, v$parameter b where (a.pool=‘shared pool‘ and a.name not in (‘free memory‘)) and b.name=‘shared_pool_size‘; --查看用户使用内存情况
select username, sum(sharable_mem), sum(persistent_mem), sum(runtime_mem)
from sys.v_$sqlarea a, dba_users b
where a.parsing_user_id = b.user_id group by username; --查看对象的缓存情况
select OWNER,NAMESPACE,TYPE,NAME,SHARABLE_MEM,LOADS,EXECUTIONS,LOCKS,PINS,KEPT
from v$db_object_cache where type not in (‘NOT LOADED‘,‘NON-EXISTENT‘,‘VIEW‘,‘TABLE‘,‘SEQUENCE‘)
and executions>0 and loads>1 and kept=‘NO‘ order by owner,namespace,type,executions desc; select type,count(*) from v$db_object_cache group by type; --查看库缓存命中率
select namespace,gets, gethitratio*100 gethitratio,pins,pinhitratio*100 pinhitratio,RELOADS,INVALIDATIONS from v$librarycache --查看某些用户的hash
select a.username, count(b.hash_value) total_hash,count(b.hash_value)-count(unique(b.hash_value)) same_hash,
(count(unique(b.hash_value))/count(b.hash_value))*100 u_hash_ratio
from dba_users a, v$sqlarea b where a.user_id=b.parsing_user_id group by a.username; --查看字典命中率
select (sum(getmisses)/sum(gets)) ratio from v$rowcache; --查看undo段的使用情况
SELECT d.segment_name,extents,optsize,shrinks,aveshrink,aveactive,d.status
FROM v$rollname n,v$rollstat s,dba_rollback_segs d
WHERE d.segment_id=n.usn(+) and d.segment_id=s.usn(+); --无效的对象
select owner,object_type,object_name from dba_objects where status=‘INVALID‘;
select constraint_name,table_name from dba_constraints where status=‘INVALID‘; --求出某个进程，并对它进行跟踪
select s.sid,s.serial# from v$session s,v$process p where s.paddr=p.addr and p.spid=&1;
exec dbms_system.SET_SQL_TRACE_IN_SESSION(&1,&2,true);
exec dbms_system.SET_SQL_TRACE_IN_SESSION(&1,&2,false); --求出锁定的对象
select do.object_name,session_id,process,locked_mode
from v$locked_object lo, dba_objects do where lo.object_id=do.object_id; --求当前session的跟踪文件
SELECT p1.value || ‘/‘ || p2.value || ‘_ora_‘ || p.spid || ‘.ora‘ filename
FROM v$process p, v$session s, v$parameter p1, v$parameter p2
WHERE p1.name = ‘user_dump_dest‘ AND p2.name = ‘instance_name‘
AND p.addr = s.paddr AND s.audsid = USERENV(‘SESSIONID‘) AND p.background is null AND instr(p.program,‘CJQ‘) = 0; --求对象所在的文件及块号
select segment_name,header_file,header_block
from dba_segments where segment_name like ‘&1‘; --求对象发生事务时回退段及块号
select a.segment_name,a.header_file,a.header_block
from dba_segments a,dba_rollback_segs b
where a.segment_name=b.segment_name and b.segment_id=‘&1‘ --9i的在线重定义表
/*如果在线重定义的表没有主键需要创建主键*/
exec dbms_redefinition.can_redef_table(‘cybercafe‘,‘announcement‘);
create table anno2 as select * from announcement
exec dbms_redefinition.start_redef_table(‘cybercafe‘,‘announcement‘,‘anno2‘);
exec dbms_redefinition.sync_interim_table(‘cybercafe‘,‘announcement‘,‘anno2‘);
exec dbms_redefinition.finish_redef_table(‘cybercafe‘,‘announcement‘,‘anno2‘);
drop table anno2
exec dbms_redefinition.abort_redef_table(‘cybercafe‘,‘announcement‘,‘anno2‘); --常用的logmnr脚本(cybercafe)
exec sys.dbms_logmnr_d.build(dictionary_filename =>‘esal‘,dictionary_location =>‘/home/oracle/logmnr‘);
exec sys.dbms_logmnr.add_logfile(logfilename=>‘/home/oracle/oradata/esal/archive/1_24050.dbf‘, ōptions=>sys.dbms_logmnr.new); exec sys.dbms_logmnr.add_logfile(logfilename=>‘/home/oracle/oradata/esal/archive/1_22912.dbf‘, ōptions=>sys.dbms_logmnr.addfile);
exec sys.dbms_logmnr.add_logfile(logfilename=>‘/home/oracle/oradata/esal/archive/1_22913.dbf‘, ōptions=>sys.dbms_logmnr.addfile);
exec sys.dbms_logmnr.add_logfile(logfilename=>‘/home/oracle/oradata/esal/archive/1_22914.dbf‘, ōptions=>sys.dbms_logmnr.addfile); exec sys.dbms_logmnr.start_logmnr(dictfilename=>‘/home/oracle/logmnr/esal.ora‘);
create table logmnr2 as select * from v$logmnr_contents; --与权限相关的字典
ALL_COL_PRIVS 表示列上的授权，用户和PUBLIC是被授予者
ALL_COL_PRIVS_MADE 表示列上的授权，用户是属主和被授予者
ALL_COL_RECD 表示列上的授权，用户和PUBLIC是被授予者
ALL_TAB_PRIVS 表示对象上的授权，用户是PUBLIC或被授予者或用户是属主
ALL_TAB_PRIVS_MADE 表示对象上的权限，用户是属主或授予者
ALL_TAB_PRIVS_RECD 表示对象上的权限, 用户是PUBLIC或被授予者
DBA_COL_PRIVS 数据库列上的所有授权
DBA_ROLE_PRIVS 显示已授予用户或其他角色的角色
DBA_SYS_PRIVS 已授予用户或角色的系统权限
DBA_TAB_PRIVS 数据库对象上的所有权限
ROLE_ROLE_PRIVS 显示已授予用户的角色
ROLE_SYS_PRIVS 显示通过角色授予用户的系统权限
ROLE_TAB_PRIVS 显示通过角色授予用户的对象权限
SESSION_PRIVS 显示用户现在可利用的所有系统权限
USER_COL_PRIVS 显示列上的权限，用户是属主、授予者或被授予者
USER_COL_PRIVS_MADE 显示列上已授予的权限，用户是属主或授予者
USER_COL_PRIVS_RECD 显示列上已授予的权限，用户是属主或被授予者
USER_ROLE_PRIVS 显示已授予给用户的所有角色
USER_SYS_PRIVS 显示已授予给用户的所有系统权限
USER_TAB_PRIVS 显示已授予给用户的所有对象权限
USER_TAB_PRIVS_MADE 显示已授予给其他用户的对象权限，用户是属主
USER_TAB_PRIVS_RECD 显示已授予给其他用户的对象权限，用户是被授予者 --如何用dbms_stats分析表及模式？
exec dbms_stats.gather_schema_stats(ownname=>‘&USER_NAME‘,estimate_percent=>dbms_stats.auto_sample_size,
method_opt => ‘for all columns size auto‘,degree=> DBMS_STATS.DEFAULT_DEGREE);
exec dbms_stats.gather_schema_stats(ownname=>‘&USER_NAME‘,estimate_percent=>dbms_stats.auto_sample_size,cascade=>true);
/*
FOR ALL [INDEXED | HIDDEN] COLUMNS [size_clause]
FOR COLUMNS [size clause] column|attribute [size_clause] [,column|attribute [size_clause]...],
where size_clause is defined as size_clause := SIZE {integer | REPEAT | AUTO | SKEWONLY}
integer--Number of histogram buckets. Must be in the range [1,254].
REPEAT--Collects histograms only on the columns that already have histograms.
AUTO--Oracle determines the columns to collect histograms based on data distribution and the workload of the columns.
SKEWONLY--Oracle determines the columns to collect histograms based on the data distribution of the columns
*/ |
