首页 > 代码库 > ansible 下lineinfile详细使用

ansible 下lineinfile详细使用

原文  http://zouqingyun.blog.51cto.com/782246/1882367

 

一、简述

这几天在看了ansible官网,收获蛮多。截取一个lineinfile模块作一个总结。如果批量修改配置文件某一行时,在写playbook时lineinfile避免不了的。

根据官网说法:lineinfile - Ensure a particular line is in a file, or replace an existing line using a back-referenced regular expression.大意是说,针对文件特殊行,使用后端引用的正则表达式来替换

二、实践

playbook,我先定义前面common部分。

---
 - hosts: "{{host}}"
   remote_user: "{{user}}"
   gather_facts: false
  
   tasks:

由于我已经定义标签tags,执行playbook中某个特定任务时,只需执行到对应TAGNAME便可

ansible-playbook line1.yml --extra-vars "host=gitlab user=root" --tags "TAGNAME" -v

1、正则匹配,更改某个关键参数值

   - name: seline modify enforcing
      lineinfile:
         dest: /etc/selinux/config
         regexp: ‘^SELINUX=‘
         line: ‘SELINUX=enforcing‘

验证

[root@master test]# cat /etc/selinux/config

# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#     enforcing - SELinux security policy is enforced.
#     permissive - SELinux prints warnings instead of enforcing.
#     disabled - No SELinux policy is loaded.
SELINUX=enforcing
# SELINUXTYPE= can take one of these two values:
#     targeted - Targeted processes are protected,
#     mls - Multi Level Security protection.
SELINUXTYPE=targeted

2、在匹配的内容前或后增加一行

2.1 http.conf

[root@master test]# cat http.conf 
#Listen 12.34.56.78:80
#Listen 80
#Port

2.2 insertbefore匹配内容在前面添加

    - name: httpd.conf modify 8080
      lineinfile:
         dest: /opt/playbook/test/http.conf
         regexp: ‘^Listen‘
         insertbefore: ‘^#Port‘   
         line: ‘Listen 8080‘
      tags:
       - http8080

验证

[root@master test]# cat http.conf 
#Listen 12.34.56.78:80
#Listen 80
Listen 8080
#Port

2.3 insertafter匹配内容在后面添加

- name: httpd.conf modify 8080
      lineinfile:
         dest: /opt/playbook/test/http.conf
         regexp: ‘^Listen‘
         insertafter: ‘^#Port‘   
         line: ‘Listen 8080‘
      tags:
       - http8080

验证

[root@master test]# cat http.conf 
#Listen 12.34.56.78:80
#Listen 80
#Port
Listen 8080

3.修改文件内容和权限

3.1 原文件内容及权限

[root@master test]# cat hosts
127.0.0.1		localhost.localdomain localhost ::1		localhost6.localdomain6 localhost6
192.168.1.2 foo.lab.net foo
[root@master test]# ls -l hosts
-rwxrwxr-x 1 root qingyun 111 12月 13 18:07 hosts

3.2 剧本

    - name: modify hosts
      lineinfile:
         dest: /opt/playbook/test/hosts
         regexp: ‘^127\.0\.0\.1‘
         line: ‘127.0.0.1 localhosts‘
         owner: root
         group: root
         mode: 0644
      tags:
       - hosts

3.3 执行验证

[root@master test]# cat hosts
127.0.0.1 localhosts
192.168.1.2 foo.lab.net foo
[root@master test]# ls -l hosts
-rw-r--r-- 1 root root 49 12月 13 18:16 hosts

4、删除某一行内容

4.1 原文件

[root@master test]# cat hosts
127.0.0.1 localhosts
192.168.1.2 foo.lab.net foo

4.2 absent剧本

- name: delete 192.168.1.1
      lineinfile:
         dest:  /opt/playbook/test/hosts
         state: absent
         regexp: ‘^192\.‘
      tags:
       - delete192

4.3 验证

[root@master test]# cat hosts

127.0.0.1 localhosts

5、文件存在就添加一行

5.1原文件

[root@master test]# cat hosts
127.0.0.1 localhosts

5.2 剧本

    - name: add a line
      lineinfile:
         dest:  /opt/playbook/test/hosts
         line: ‘192.168.1.2 foo.lab.net foo‘
      tags:
       - add_a_line

5.3 验证

[root@master test]# cat hosts
127.0.0.1 localhosts
192.168.1.2 foo.lab.net foo

6、如果匹配到,引用line这一行作为替换。如果没有匹配到,则完全引用line这一行作为添加

6.1 原文件

[root@master test]# cat testfile
# %wheel	ALL=(ALL)	ALL

6.2 剧本

    - name: Fully quoted a line
      lineinfile:
         dest: /opt/playbook/test/testfile
         state: present
         regexp: ‘^%wheel‘
         line: ‘%wheel  ALL=(ALL)       NOPASSWD: ALL‘

      tags:
        - testfile

6.3 验证

[root@master test]# cat testfile
# %wheel	ALL=(ALL)	ALL
%wheel  ALL=(ALL)       NOPASSWD: ALL

6.4 原文件

[root@master test]# cat testfile
# %wheel	ALL=(ALL)	ALL
%wheel  1234  ALL =(all) NOPASSWD

6.5 验证

Using /etc/ansible/ansible.cfg as config file

PLAY [gitlab] ******************************************************************

TASK [Fully quoted a line] *****************************************************
changed: [master] => {"backup": "", "changed": true, "msg": "line replaced"}

PLAY RECAP *********************************************************************
master                     : ok=1    changed=1    unreachable=0    failed=0   

[root@master test]# cat testfile
# %wheel	ALL=(ALL)	ALL
%wheel  ALL=(ALL)       NOPASSWD: ALL

7、关于参数backrefs,backup使用。

  • backrefs为no时,如果没有匹配,则添加一行line。如果匹配了,则把匹配内容替被换为line内容。

  • backrefs为yes时,如果没有匹配,则文件保持不变。如果匹配了,把匹配内容替被换为line内容。

  • backup为no时,没有匹配,则添加。如果匹配了,则替换

  • backup为yes时,没有匹配,添加,如果匹配了,则替换

7.1 需要关心的,backrefs为yes时情景

7.1.1 原文件

[root@master test]# cat testfile
# %wheel	ALL=(ALL)	ALL
%wheel  ALL=(ALL)       NOPASSWD: ALL
#?bar

7.1.2 剧本

    - name: test backrefs
      lineinfile:
#          backup: yes
          state: present
          dest: /opt/playbook/test/testfile
          regexp: ‘^#\?bar‘
          backrefs: yes
          line: ‘bar‘
      tags:
        - test_backrefs

7.1.3 验证

[root@master test]# cat testfile
# %wheel	ALL=(ALL)	ALL
%wheel  ALL=(ALL)       NOPASSWD: ALL
bar

7.1.3 没有匹配

[root@master test]# cat testfile
# %wheel	ALL=(ALL)	ALL
%wheel  ALL=(ALL)       NOPASSWD: ALL

7.1.4 验证

Using /etc/ansible/ansible.cfg as config file

PLAY [gitlab] ******************************************************************

TASK [test backrefs] ***********************************************************
ok: [master] => {"backup": "", "changed": false, "msg": ""}

PLAY RECAP *********************************************************************
master                     : ok=1    changed=0    unreachable=0    failed=0

文件保持不变

8、使用valiate参数,在保存sudoers文件前,验证语法,如果有错,执行时,会报出来,重新编辑playbook

8.1 剧本

- name: test validate
      lineinfile:
          dest: /etc/sudoers
          state: present
          regexp: ‘^%ADMIN ALL=‘
          line: ‘%ADMIN ALL=(ALL)‘
          validate: ‘visudo -cf %s‘
      tags:
        - testsudo

8.2 执行验证就说语法不过关

Using /etc/ansible/ansible.cfg as config file

PLAY [gitlab] ******************************************************************

TASK [test validate] ***********************************************************
fatal: [master]: FAILED! => {"changed": false, "failed": true, "msg": "failed to validate: rc:1 error:visudo:>>> /tmp/tmpgQjHYM:syntax error 在行 114 附近<<<\n"}
	to retry, use: --limit @/opt/playbook/test/line1.retry

PLAY RECAP *********************************************************************
master                     : ok=0    changed=0    unreachable=0    failed=1

三、总结

具体模块使用,ansible-doc可以查看详细用法。

ansible 下lineinfile详细使用