首页 > 代码库 > 实现简单的计算器

实现简单的计算器

2024-09-15 09:46:28   250人阅读

计算器开发需求

  1. 实现加减乘除及拓号优先级解析
  2. 用户输入 1 - 2 * ( (60-30 +(-40/5) * (9-2*5/3 + 7 /3*99/4*2998 +10 * 568/14 )) - (-4*3)/ (16-3*2) )等类似公式后，必须自己解析里面的(),+,-,*,/符号和公式，运算后得出结果，结果必须与真实的计算器所得出的结果一致
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
import re
import functools
 
 
def minus_operator_handler(formula):
    ‘‘‘处理一些特殊的减号运算‘‘‘
    minus_operators = re.split("-",formula)
    calc_list= re.findall("[0-9]",formula)
    if minus_operators[0] == ‘‘: #第一值肯定是负号
        calc_list[0] = ‘-%s‘ % calc_list[0]
    res = functools.reduce(lambda x,y:float(x) - float(y), calc_list)
    print("\033[33;1m减号[%s]处理结果:\033[0m" % formula, res )
    return res
 
def remove_duplicates(formula):
    formula = formula.replace("++","+")
    formula = formula.replace("+-","-")
    formula = formula.replace("-+","-")
    formula = formula.replace("--","+")
    formula = formula.replace("- -","+")
    return formula
def compute_mutiply_and_dividend(formula):
    ‘‘‘算乘除,传进来的是字符串噢‘‘‘
    operators = re.findall("[*/]", formula )
    calc_list = re.split("[*/]", formula )
    res = None
    for index,i in enumerate(calc_list):
        if res:
            if operators[index-1] == "*":
                res *= float(i)
            elif operators[index-1] == "/":
                res /= float(i)
        else:
            res = float(i)
 
    print("\033[31;1m[%s]运算结果=\033[0m" %formula, res  )
    return res
def handle_minus_in_list(operator_list,calc_list):
    ‘‘‘有的时候把算术符和值分开后,会出现这种情况  [‘-‘, ‘-‘, ‘-‘] [‘ ‘, ‘14969037.996825399 ‘, ‘ ‘, ‘12.0/ 10.0 ‘]
       这需要把第2个列表中的空格都变成负号并与其后面的值拼起来,恶心死了
    ‘‘‘
    for index,i in enumerate(calc_list):
        if i == ‘‘: #它其实是代表负号,改成负号
            calc_list[index+1] = i + calc_list[index+1].strip()
def handle_special_occactions(plus_and_minus_operators,multiply_and_dividend):
    ‘‘‘有时会出现这种情况 , [‘-‘, ‘-‘] [‘1 ‘, ‘ 2 * ‘, ‘14969036.7968254‘],2*...后面这段实际是 2*-14969036.7968254,需要特别处理下,太恶心了‘‘‘
    for index,i in enumerate(multiply_and_dividend):
        i = i.strip()
        if i.endswith("*") or i.endswith("/"):
            multiply_and_dividend[index] = multiply_and_dividend[index] + plus_and_minus_operators[index] + multiply_and_dividend[index+1]
            del multiply_and_dividend[index+1]
            del plus_and_minus_operators[index]
    return plus_and_minus_operators,multiply_and_dividend
def compute(formula):
    ‘‘‘这里计算是的不带括号的公式‘‘‘
 
    formula = formula.strip("()") #去除外面包的拓号
    formula = remove_duplicates(formula) #去除外重复的+-号
    plus_and_minus_operators = re.findall("[+-]", formula)
    multiply_and_dividend = re.split("[+-]", formula) #取出乘除公式
    if len(multiply_and_dividend[0].strip()) == 0:#代表这肯定是个减号
        multiply_and_dividend[1] = plus_and_minus_operators[0] + multiply_and_dividend[1]
        del multiply_and_dividend[0]
        del plus_and_minus_operators[0]
 
    plus_and_minus_operators,multiply_and_dividend=handle_special_occactions(plus_and_minus_operators,multiply_and_dividend)
    for index,i in enumerate(multiply_and_dividend):
        if re.search("[*/]" ,i):
            sub_res = compute_mutiply_and_dividend(i)
            multiply_and_dividend[index] = sub_res
 
    #开始运算+,-
    print(multiply_and_dividend, plus_and_minus_operators)
    total_res = None
    for index,item in enumerate(multiply_and_dividend):
        if total_res: #代表不是第一次循环
            if plus_and_minus_operators[index-1] == ‘+‘:
                total_res += float(item)
            elif plus_and_minus_operators[index-1] == ‘-‘:
                total_res -= float(item)
        else:
            total_res = float(item)
    print("\033[32;1m[%s]运算结果:\033[0m" %formula,total_res)
    return total_res
 
def calc(formula):
    ‘‘‘计算程序主入口, 主要逻辑是先计算拓号里的值,算出来后再算乘除,再算加减‘‘‘
    parenthesise_flag = True
    calc_res = None #初始化运算结果为None,还没开始运算呢,当然为None啦
    while parenthesise_flag:
        m = re.search("\([^()]*\)", formula) #找到最里层的拓号
        if m:
            #print("先算拓号里的值:",m.group())
            sub_res = compute(m.group())
            formula = formula.replace(m.group(),str(sub_res))
        else:
            print(‘\033[41;1m----没拓号了...---\033[0m‘)
 
            print(‘\n\n\033[42;1m最终结果:\033[0m‘,compute(formula))
            parenthesise_flag = False #代表公式里的拓号已经都被剥除啦
 
if __name__ == ‘__main__‘:
 
    #res = calc("1 - 2 * ( (60-30 +(-40/5) * (9-2*5/3 + 7 /3*99/4*2998 +10 * 568/14 )) - (-4*3)/ (16-3*2) )")
    res = calc("1 - 2 * ( (60-30 +(-9-2-5-2*3-5/3-40*4/2-3/5+6*3) * (-9-2-5-2*5/3 + 7 /3*99/4*2998 +10 * 568/14 )) - (-4*3)/ (16-3*2) )")

　　

实现简单的计算器


联系
我们