今天遇到一个问题，就是“NeatUpload大文件上传控件而导致Nonfile portion > 4194304 bytes错误”,百度后发现了一个解决方法，跟大家分享下:

NeatUpload是一个开源的大文件上传控件，非常的强大，支持文件类型过滤、上传进度条显示、多文件上传等强大的功能。 

         但部署至项目后，有些地方用普通的FileUpload上传时却发生了一个错误（Nonfile portion > 4194304 bytes，文件大于默认值4M），因如果用NeatUpload控件及需要显示上传进度条的话，得在web.config中加入如下代码：

              <httpModules>
                       <add name="UploadHttpModule" type="Brettle.Web.NeatUpload.UploadHttpModule, Brettle.Web.NeatUpload"/>

             </httpModules> 

        这时全站都会默认使用此httpModule，当你使用FileUpload上传文件时，只要是超过4M（默认的）的都不能上传，就算你配置了<httpRuntime maxRequestLength="400000" executionTimeout="3600"/>都没用，还是会出现Nonfile portion > 4194304 bytes的错误的。 

        解决方法如下：

        1、在<configuration>里面加入以下代码：

                <configSections>
                           <sectionGroup name="system.web">
                                    <section name="neatUpload" type="Brettle.Web.NeatUpload.ConfigSectionHandler, Brettle.Web.NeatUpload" allowLocation="true" />
                           </sectionGroup>
                </configSections>

        2、在<system.web>节中插入以下代码（此方式是全局性的，第3种为针对某页面）：

               <neatUpload useHttpModule="true" maxNormalRequestLength="40960" maxRequestLength="2097151" defaultProvider="FilesystemUploadStorageProvider">
                        <providers>
                              <add name="FilesystemUploadStorageProvider" type="Brettle.Web.NeatUpload.FilesystemUploadStorageProvider, Brettle.Web.NeatUpload"/>
                       </providers>
              </neatUpload>

              此方法是修改属性maxNormalRequestLength的值为40960（40M），如果将useHttpModule改为false则无所谓。

       3、在<configuration>里面的后面位置加入以下代码（此方式是针对某一页面）：

                <location path="UploadFile.aspx" ><!--上传文件的页面路径-->
                       <system.web>
                              <neatUpload useHttpModule="true" />  <!--为true则代表使用neatUpload的httpModule，false为不使用-->
                              <httpRuntime maxRequestLength="40960" executionTimeout="3600" useFullyQualifiedRedirectUrl="true" />  <!--允许最大为40M-->
                      </system.web>
               </location>

       neatUpload节点的相关属性介绍如下： 

         <neatUpload 
              useHttpModule="true or false, defaults to true"
              maxNormalRequestLength="up to 2097151 in KBytes, defaults to 4096" 
              maxRequestLength="up to 2097151 in KBytes, defaults to 2097151" 
              maxUploadRate="rate in KBytes/sec, defaults to -1 which means unlimited"
              postBackIDQueryParam="parameter name, defaults to NeatUpload_PostBackID"
              multiRequestUploadHandlerUrl="URL that handles the requests in a multi-request upload,defaults to ~/NeatUpload/MultiRequestUploadHandler.ashx"
              debugDirectory="directory to which debug info should be written, defaults to none"
              decryption="name of the SymmetricAlgorithm to use to encrypt/decrypt protected data, defaults to .NET default algorithm used by SymmetricAlgorithm.Create()"
              validation="name of the HashAlgorithm to use to validate protected data, defaults to .NET default algorithm used by HashAlgorithm.Create()"
              decryptionKey="32 hex-digit key used to encrypt/decrypt protected data, defaults to auto-generated for each app instance"
              stateMergeIntervalSeconds="secs between merges of the current and stored upload states,defaults to 1"
              stateStaleAfterSeconds="secs before an unchanged upload state can be removed from the store, defaults to 60"
              defaultStorageProvider="friendly name,defaults to a FilesystemUploadStorageProvider with default temp dir"
              defaultStateStoreProvider="friendly name, defaults to a AdaptiveUploadStateStoreProvider"
        >
              <providers>
                   <add name="friendly name"  type="type derived from Brettle.Web.NeatUpload.UploadStorageProvider" />
             </providers>
     </neatUpload>

 本来来自：http://blog.csdn.net/fgdfgasd/article/details/7108973 

分享给遇到同样问题的朋友。