首页 > 代码库 > 关于ABAP流程处理的一些命令的说明(stop,exit,return,check,reject)
关于ABAP流程处理的一些命令的说明(stop,exit,return,check,reject)
Stop 命令
使用该命令的程序位置
INITIALIZATION, AT SELECTION-SCREEN, START-OF-SELECTION和GET 事件中
处理说明
1、 当在INITIALIZATION事件执行该命令，系统将直接触发应用服务器和客户端屏幕元素的发送；
2、 在其他事件中将直接触发END-OF-SELECTION事件的执行，如果不想执行END-OF-SELECTION，请使用RETURN或者 EXIT.
注意事项
EXIT命令
使用该命令的程序位置
用于循环和程序模块中：DO和其他处理模块中(event block, dialog module, procedure (function module, method, subroutine))...ENDDO,WHILE...ENDWHILE,LOOP...ENDLOOP,SELECT...ENDSELECT
处理说明
1、 循环处理中，EXIT只跳出当前的循环；
2、 在START-OF-SELECTION, GET, END-OF-SELECTION事件中，将直接触发List输出，将不执行END-OF-SELECTION事件;如果没有List输出，系统将直接返回选择屏幕；
3、 对于procedure系统返回调用处；
注意事项
Sap推荐EXIT只是用于循环处理，对于处理模块请使用Return。
RETURN命令
使用该命令的程序位置
用于处理模块中(event block, dialog module, procedure (function module, method, subroutine))
处理说明
1、 对于procedure ，RETURN将无条件退出当前的处理模块，不影响后续模块的执行；
2、 对于START-OF-SELECTION, GET, END-OF-SELECTION事件中，将直接触发List输出，将不执行END-OF-SELECTION事件;如果没有List输出，系统将直接返回选择屏幕；
注意事项
RETURN不管存在多少层次的循环，将直接退出当前处理模块，这一点和EXIT不同
CHECK命令
使用该命令的程序位置
用于循环和程序模块中：DO和其他处理模块中(event block, dialog module, procedure (function module, method, subroutine))...ENDDO,WHILE...ENDWHILE,LOOP...ENDLOOP,SELECT...ENDSELECT
处理说明
1、 循环处理中，CHECK只是不执行本次循环的后续处理，继续调到下一次循环；
2、 在START-OF-SELECTION, GET, END-OF-SELECTION事件中，只是中断本事件内的后续代码的执行 ，不影响其他后续模块的处理，这和EXIT，RETURN是不同的；
3、 对于没有循环procedure系统返回调用处；
4、 对逻辑数据库的GET事件，系统退出本次纪录和子节点的读取处理，将继续下一条纪录的处理；
注意事项
Sap推荐CHECK只是用于循环处理，对于处理模块请使用Return。
REJECT命令
使用该命令的程序位置
用于逻辑数据库的GET处理事件中
处理说明
REJECT的处理类似CHECK，但和CHECK不同的是：REJECT如果在循环内也同样退出本次的处理，而CHECK只是退出循环，不退出处理
注意事项
MESSAGE命令
使用该命令的程序位置
处理说明
MESSAGE在不同程序位置对应处理列表
| A | E | I | S | W | X | |
| PAI Module | 1 | 2 | 3 | 4 | 5 | 6 |
| PAI Module for POH | 1 | 7 | 3 | 4 | 7 | 6 |
| PAI Module for POV | 1 | 7 | 3 | 4 | 7 | 6 |
| AT SELECTION-SCREEN ... | 1 | 8 | 3 | 4 | 9 | 6 |
| AT SELECTION-SCREEN for POH | 1 | 7 | 3 | 4 | 7 | 6 |
| AT SELECTION-SCREEN for POV | 1 | 7 | 3 | 4 | 7 | 6 |
| AT SELECTION-SCREEN ON EXIT | 1 | 7 | 3 | 4 | 7 | 6 |
| AT LINE-SELECTION | 1 | 10 | 3 | 4 | 10 | 6 |
| AT PFn | 1 | 10 | 3 | 4 | 10 | 6 |
| AT USER-COMMAND | 1 | 10 | 3 | 4 | 10 | 6 |
| INITIALIZATION | 1 | 11 | 3 | 4 | 11 | 6 |
| START-OF-SELECTION | 1 | 11 | 3 | 4 | 11 | 6 |
| GET | 1 | 11 | 3 | 4 | 11 | 6 |
| END-OF-SELECTION | 1 | 11 | 3 | 4 | 11 | 6 |
| TOP-OF-PAGE | 1 | 11 | 3 | 4 | 11 | 6 |
| END-OF-PAGE | 1 | 11 | 3 | 4 | 11 | 6 |
| TOP-OF-PAGE DURING ... | 1 | 10 | 3 | 4 | 10 | 6 |
| LOAD-OF-PROGRAM | 1 | 1 | 4 | 4 | 4 | 6 |
| PBO Module | 1 | 1 | 4 | 4 | 4 | 6 |
| AT SELECTION-SCREEN OUTPUT | 1 | 1 | 4 | 4 | 4 | 6 |
- The message appears in a dialog box and the program terminates. When the user has confirmed the message, control returns to the next- highest area. All the internal sessions are deleted from the stack.
- The message appears in the status line. Then PAI terminates and the system returns to the current screen. All the screen fields combined using FIELD or CHAIN are now ready for input. The user must enter new values. The system triggers the PAI event again, with the new values.
- The message appears in a dialog box. Once the user has confirmed the message, the program continues immediately after the MESSAGE statement.
- The message appears in the status line of the next screen. The program continues immediately after the message statement.
- The message appears in the status line. Then the system continues as in 2, except that the user can quit the message using ENTER without having to enter new values. The system continues handling the PAI event from immediately after the message statement.
- No message is displayed and a runtime error, MESSAGE_TYPE_X, is triggered. The short dump text contains the message identification.
- The program terminates with a runtime error DYNPRO_MSG_IN_HELP. While F1 and F4 are processed, the system cannot send error messages or warnings.
- The message appears in the status line. Then the system stops selection screen processing and returns to the selection screen itself. The screen fields specified in the additions to the AT SELECTION-SCREEN statement are now ready for input. The user must enter new values. The system then starts processing the selection screen again with the new values.
- The message appears in the status line. Then the system continues as in 8, except the the user can quit the message using ENTER, without having to enter new values. The system continues handling the PAI event from immediately after the message statement.
- The message appears in the status line and the processing block terminates. The list level is displayed as before.
- The message appears in the status line and the processing block terminates. The system then returns to the program call.
声明：以上内容来自用户投稿及互联网公开渠道收集整理发布，本网站不拥有所有权，未作人工编辑处理，也不承担相关法律责任，若内容有误或涉及侵权可进行投诉： 投诉/举报 工作人员会在5个工作日内联系你，一经查实，本站将立刻删除涉嫌侵权内容。