首页 > 代码库 > hdu 5083 Instruction(Bestcoder Round #15)
hdu 5083 Instruction(Bestcoder Round #15)
Instruction
Time Limit: 2000/1000 MS (Java/Others) Memory Limit: 32768/32768 K (Java/Others)Total Submission(s): 327 Accepted Submission(s): 94
Problem Description
Nowadays, Jim Green has produced a kind of computer called JG. In his computer, the instruction is represented by binary code. However when we code in this computer, we use some mnemonic symbols. For example, ADD R1, R2 means to add the number in register R1 and R2, then store the result to R1. But this instruction cannot be execute directly by computer, before this instruction is executed, it must be changed to binary code which can be executed by computer. Each instruction corresponds to a 16-bit binary code. The higher 6 bits indicates the operation code, the middle 5 bits indicates the destination operator, and the lower 5 bits indicates the source operator. You can see Form 1 for more details.
15 operation code(6 bits)109destination operator code(5 bits)54source operator code(5 bits)0Form 1
In JG system there are 6 instructions which are listed in Form 2.
instructionADD Ra,RbSUB Ra,RbDIV Ra,RbMUL Ra,RbMOVE Ra,RbSET RafunctionAdd the number in register Ra and Rb, then store the result to Ra.Subtract the number in register Ra to Rb, then store the result to Ra.Divide the number in register Ra by Rb, then store the result to Ra.Mulplicate the number in register Ra and Rb, then store the result to Ra.Move the number in register Rb to Ra.Set 0 to Ra.Form 2
Operation code is generated according to Form 3.
OperationADDSUBDIVMULMOVESETOperation code000001000010000011000100000101000110Form 3
Destination operator code and source operator code is the register code of the register which is related to.
There are 31 registers in total. Their names are R1,R2,R3…,R30,R31. The register code of Ri is the last 5 bits of the number of i in the binary system. For eaxample the register code of R1 is 00001, the register code of R2 is 00010, the register code of R7 is 00111, the register code of R10 is 01010, the register code of R31 is 11111.
So we can transfer an instruction into a 16-bit binary code easyly. For example, if we want to transfer the instruction ADD R1,R2, we know the operation is ADD whose operation code is 000001, destination operator code is 00001 which is the register code of R1, and source operator code is 00010 which is the register code of R2. So we joint them to get the 16-bit binary code which is 0000010000100010.
However for the instruction SET Ra, there is no source register, so we fill the lower 5 bits with five 0s. For example, the 16-bit binary code of SET R10 is 0001100101000000
You are expected to write a program to transfer an instruction into a 16-bit binary code or vice-versa.
In JG system there are 6 instructions which are listed in Form 2.
Operation code is generated according to Form 3.
Destination operator code and source operator code is the register code of the register which is related to.
There are 31 registers in total. Their names are R1,R2,R3…,R30,R31. The register code of Ri is the last 5 bits of the number of i in the binary system. For eaxample the register code of R1 is 00001, the register code of R2 is 00010, the register code of R7 is 00111, the register code of R10 is 01010, the register code of R31 is 11111.
So we can transfer an instruction into a 16-bit binary code easyly. For example, if we want to transfer the instruction ADD R1,R2, we know the operation is ADD whose operation code is 000001, destination operator code is 00001 which is the register code of R1, and source operator code is 00010 which is the register code of R2. So we joint them to get the 16-bit binary code which is 0000010000100010.
However for the instruction SET Ra, there is no source register, so we fill the lower 5 bits with five 0s. For example, the 16-bit binary code of SET R10 is 0001100101000000
You are expected to write a program to transfer an instruction into a 16-bit binary code or vice-versa.
Input
Multi test cases (about 50000), every case contains two lines.
First line contains a type sign, ‘0’ or ‘1’.
‘1’ means you should transfer an instruction into a 16-bit binary code;
‘0’ means you should transfer a 16-bit binary code into an instruction.
For the second line.
If the type sign is ‘1’, an instruction will appear in the standard form which will be given in technical specification;
Otherwise, a 16-bit binary code will appear instead.
Please process to the end of file.
[Technical Specification]
The standard form of instructions is
ADD Ra,Rb
SUB Ra,Rb
DIV Ra,Rb
MUL Ra,Rb
MOVE Ra,Rb
SET Ra
which are also listed in the Form 2.
1≤a,b≤31
There is exactly one space after operation, and exactly one comma between Ra and Rb other than the instruction SET Ra. No other character will appear in the instruction.
First line contains a type sign, ‘0’ or ‘1’.
‘1’ means you should transfer an instruction into a 16-bit binary code;
‘0’ means you should transfer a 16-bit binary code into an instruction.
For the second line.
If the type sign is ‘1’, an instruction will appear in the standard form which will be given in technical specification;
Otherwise, a 16-bit binary code will appear instead.
Please process to the end of file.
[Technical Specification]
The standard form of instructions is
ADD Ra,Rb
SUB Ra,Rb
DIV Ra,Rb
MUL Ra,Rb
MOVE Ra,Rb
SET Ra
which are also listed in the Form 2.
There is exactly one space after operation, and exactly one comma between Ra and Rb other than the instruction SET Ra. No other character will appear in the instruction.
Output
For type ‘0’，if the 16-bit binary code cannot be transferred into a instruction according to the description output “Error!” (without quote), otherwise transfer the 16-bit binary code into instruction and output the instruction in the standard form in a single line.
For type ‘1’, transfer the instruction into 16-bit binary code and output it in a single line.
For type ‘1’, transfer the instruction into 16-bit binary code and output it in a single line.
Sample Input
1 ADD R1,R2 0 0000010000100010 0 1111111111111111
Sample Output
0000010000100010 ADD R1,R2 Error!
模拟一下就好了。Ra，Rb中的1<=a,b<=31,解码时要判断是否符合条件，我还以为是给定的条件呢，wa了好几
发。
ps：在这题上感受到了Bestcoder深深的恶意，就是不让我过两题，我的rating啊，已经跌的惨不忍睹了%>_<%，
上次差几秒剪枝就加上去了，这次竟然TLE，用g++交的，用C++交78ms过。g++与C++差别怎么就这么大啊。
代码：
#include <iostream>
#include <cstdio>
#include <string>
#include <cstring>
using namespace std;
string s;
int main()
{
int n;
while(~scanf("%d",&n))
{
if(n==0)
{
cin>>s;
if(s.size()>16)
{
printf("Error!\n");
continue;
}
int a=0,b=0,c=0;
for(int i=5; i>=0; i--)
{
if(s[i]-'0'==1)
{
a+=(1<<(5-i));
}
}
for(int i=10; i>=6; i--)
{
if(s[i]-'0'==1)
{
b+=(1<<(10-i));
}
}
for(int i=15; i>=11; i--)
{
if(s[i]-'0'==1)
{
c+=(1<<(15-i));
}
}
if(a==1&&b>0&&c>0)
{
printf("ADD R%d,R%d\n",b,c);
}
else if(a==2&&b>0&&c>0)
{
printf("SUB R%d,R%d\n",b,c);
}
else if(a==3&&b>0&&c>0)
{
printf("DIV R%d,R%d\n",b,c);
}
else if(a==4&&b>0&&c>0)
{
printf("MUL R%d,R%d\n",b,c);
}
else if(a==5&&b>0&&c>0)
{
printf("MOVE R%d,R%d\n",b,c);
}
else if(a==6&&b>0&&c==0)
{
printf("SET R%d\n",b);
}
else
printf("Error!\n");
}
else
{
char s1,s2,temp,temp2;
int x,y;
cin>>s;
int a[10];
int b[10];
memset(a,0,sizeof(a));
memset(b,0,sizeof(b));
if(s=="ADD")
{
scanf("%c%c%d%c%c%d",&temp2,&s1,&x,&temp,&s2,&y);
// printf("%d %d\n",x,y);
printf("000001");
for(int i=4; i>=0; i--)
{
if(x%2)
a[i]=1;
else
a[i]=0;
x=x/2;
}
for(int i=4; i>=0; i--)
{
if(y%2)
b[i]=1;
else
b[i]=0;
y=y/2;
}
for(int i=0; i<=4; i++)
printf("%d",a[i]);
for(int i=0; i<=4; i++)
printf("%d",b[i]);
printf("\n");
}
else if(s=="SUB")
{
scanf("%c%c%d%c%c%d",&temp2,&s1,&x,&temp,&s2,&y);
// printf("%d %d\n",x,y);
printf("000010");
for(int i=4; i>=0; i--)
{
if(x%2)
a[i]=1;
else
a[i]=0;
x=x/2;
}
for(int i=4; i>=0; i--)
{
if(y%2)
b[i]=1;
else
b[i]=0;
y=y/2;
}
for(int i=0; i<=4; i++)
printf("%d",a[i]);
for(int i=0; i<=4; i++)
printf("%d",b[i]);
printf("\n");
}
else if(s=="DIV")
{
scanf("%c%c%d%c%c%d",&temp2,&s1,&x,&temp,&s2,&y);
// printf("%d %d\n",x,y);
printf("000011");
for(int i=4; i>=0; i--)
{
if(x%2)
a[i]=1;
else
a[i]=0;
x=x/2;
}
for(int i=4; i>=0; i--)
{
if(y%2)
b[i]=1;
else
b[i]=0;
y=y/2;
}
for(int i=0; i<=4; i++)
printf("%d",a[i]);
for(int i=0; i<=4; i++)
printf("%d",b[i]);
printf("\n");
}
else if(s=="MUL")
{
scanf("%c%c%d%c%c%d",&temp2,&s1,&x,&temp,&s2,&y);
// printf("%d %d\n",x,y);
printf("000100");
for(int i=4; i>=0; i--)
{
if(x%2)
a[i]=1;
else
a[i]=0;
x=x/2;
}
for(int i=4; i>=0; i--)
{
if(y%2)
b[i]=1;
else
b[i]=0;
y=y/2;
}
for(int i=0; i<=4; i++)
printf("%d",a[i]);
for(int i=0; i<=4; i++)
printf("%d",b[i]);
printf("\n");
}
else if(s=="MOVE")
{
scanf("%c%c%d%c%c%d",&temp2,&s1,&x,&temp,&s2,&y);
// printf("%d %d\n",x,y);
printf("000101");
for(int i=4; i>=0; i--)
{
if(x%2)
a[i]=1;
else
a[i]=0;
x=x/2;
}
for(int i=4; i>=0; i--)
{
if(y%2)
b[i]=1;
else
b[i]=0;
y=y/2;
}
for(int i=0; i<=4; i++)
printf("%d",a[i]);
for(int i=0; i<=4; i++)
printf("%d",b[i]);
printf("\n");
}
else if(s=="SET")
{
scanf("%c%c%d",&temp2,&s1,&x);
// printf("%d %d\n",x,y);
printf("000110");
for(int i=4; i>=0; i--)
{
if(x%2)
a[i]=1;
else
a[i]=0;
x=x/2;
}
for(int i=0; i<=4; i++)
printf("%d",a[i]);
for(int i=0; i<=4; i++)
printf("0");
printf("\n");
}
}
}
return 0;
}
hdu 5083 Instruction(Bestcoder Round #15)
声明：以上内容来自用户投稿及互联网公开渠道收集整理发布，本网站不拥有所有权，未作人工编辑处理，也不承担相关法律责任，若内容有误或涉及侵权可进行投诉： 投诉/举报 工作人员会在5个工作日内联系你，一经查实，本站将立刻删除涉嫌侵权内容。