首页 > 代码库 > dbrd 8.4.6 源代码编译安装
dbrd 8.4.6 源代码编译安装
----------------------------
0.系统环境
----------------------------
db01 192.168.50.10 /dev/sdb1 主节点
db02 192.168.50.20 /dev/sdb1 备节点
# grep -v "#" /etc/hosts
192.168.50.10 db01 db01.mysql.com
192.168.50.20 db02 db02.mysql.com
#一块新硬盘
ll /dev/sd*
ll /dev/sdb*
brw-rw---- 1 root disk 8, 16 Jun 24 13:37 /dev/sdb
brw-rw---- 1 root disk 8, 17 Jun 24 13:37 /dev/sdb1
NOTE:sdb1分区未格式化.
----------------------------
1.准备安装环境
----------------------------
yum install -y make automak kernel kernel-devel kernel-headers gcc flex libxslt
----------------------------
2.编译安装drbd
----------------------------
wget http://oss.linbit.com/drbd/8.4/drbd-8.4.6.tar.gz
tar xzf drbd-8.4.6.tar.gz
cd drbd-8.4.6
------------------#開始编译安装drbd，和8.4.5之前版本号有所不同，这里不用./configure,直接make就能够了
./configure --prefix=/usr/local/drbd --with-km --with-heartbeat --sysconfdir=/etc/
#with-km开启内核模块
#with-heartbeat 开启heart支持
#ls -ld /usr/src/kernels/$(uname -r)/
make KDIR=/usr/src/kernels/$(uname -r)/ #指定内核源路径開始编译
#make install
--直接结果:
make -C drbd install
make[1]: Entering directory `/soft/drbd-8.4.6/drbd'
install -d //lib/modules/2.6.32-431.el6.x86_64/updates
install -m 644 drbd.ko //lib/modules/2.6.32-431.el6.x86_64/updates
/sbin/depmod -a || /sbin/depmod -e drbd.ko 2>&1 >/dev/null || true
make[1]: Leaving directory `/soft/drbd-8.4.6/drbd'
编译成功模块安装位置
#modprobe -l | grep -i drbd
updates/drbd.ko
载入模块
# modprobe drbd
#lsmod | grep drbd
drbd 376868 0
libcrc32c 1246 1 drbd
----------------------------
3.编译安装drbd-utils
----------------------------
#wget http://oss.linbit.com/drbd/drbd-utils-8.9.3.tar.gz-P /usr/local/src/
# tar -xf drbd-utils-8.9.3.tar.gz -C /usr/local/src
# cd /usr/local/src/drbd-utils-8.9.3
这里用了--without-83support，由于安装的是8.4以上版本号
#./configure --prefix=/usr/local/drbd --sysconfdir=DIR --without-83support
/******************參数具体解释
Fine tuning of the installation directories:
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
--datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
--datadir=DIR read-only architecture-independent data [DATAROOTDIR]
--infodir=DIR info documentation [DATAROOTDIR/info]
--localedir=DIR locale-dependent data [DATAROOTDIR/locale]
--mandir=DIR man documentation [DATAROOTDIR/man]
--docdir=DIR documentation root [DATAROOTDIR/doc/drbd]
--htmldir=DIR html documentation [DOCDIR]
--dvidir=DIR dvi documentation [DOCDIR]
--pdfdir=DIR pdf documentation [DOCDIR]
--psdir=DIR ps documentation [DOCDIR]
Optional Features:
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-spec Rather than creating Makefiles, create an RPM spec
file only
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--without-83support Do not include support for drbd driver/module <= 8.3
--without-84support Do not include support for drbd driver/module 8.4
--with-udev Enable udev integration
--with-xen Enable Xen integration
--with-pacemaker Enable Pacemaker integration
--with-heartbeat Enable Heartbeat v1 haresources integration scripts
--with-rgmanager Enable Red Hat Cluster Suite integration
--with-bashcompletion Enable programmable bash completion
--with-distro Configure for a specific distribution (supported
values: generic, redhat, suse, debian, gentoo,
slackware; default is to autodetect)
--with-initdir Override directory for init scripts (default is
distribution-specific)
--with-noarchsubpkg Build subpackages that support it for the "noarch"
architecture (makes sense only with --enable-spec,
supported by RPM from 4.6.0 forward)
--with-systemdunitdir=DIR
Directory for systemd service files [Auto]
--with-tmpfilesdir=DIR install configuration files for management of
volatile files and directories in DIR
[[PREFIX/lib/tmpfiles.d]]
--with-initscripttype=INIT_SCRIPT_TYPE
Type of init script to install (sysv|systemd|both).
[auto]
********************************/
#make
#make install
成功安装后drbd相关的工具(drbdadm,drbdsetup)被安装到/usr/local/drbd-utils-8.9.3/etc/sbin文件夹下
#cp /usr/local/drbd/etc/rc.d/init.d/drbd /etc/rc.d/init.d/
#chkconfig --add drbd
#chkconfig --level 2345 drbd on
#链接drbd的命令到系统命令路径
ln -s /usr/local/drbd/sbin/* /usr/bin/
----------------------------
4.设置drbd.conf配置文件
----------------------------
本次编译安装配置文件位置:/usr/local/drbd/etc/
#vi /etc/drbd.conf
----------------------------
5.启动
----------------------------
----5.0 在两台机器上配置r0资源
两台机器上分别初始化r0资源，创建DRBD分区
准备初始化之前。须要分别在2个主机上的 空白分区上创建对应的元数据保存的数据块：
常见之前现将两块空白分区彻底清除数据,分别在两个主机上运行
dd if=/dev/zero of=/dev/sdb1 bs=1M count=128
drbdadm -c /etc/drbd.conf create-md all
或
drbdadm -c /etc/drbd.conf create-md r0
--5.1启动两个节点drbd
mkdir -p /usr/local/drbd/var/run/drbd
#/etc/init.d/drbd start
Starting DRBD resources: no resources defined!
no resources defined!
no resources defined!
PS：提示未定义“资源”。这是由于刚安装好的DRBD，默认没有*.res配置文件
#netstat |grep 7788
--5.2 查看状态：
#/etc/init.d/drbd status
drbd driver loaded OK; device status:
version: 8.4.6 (api:1/proto:86-101)
GIT-hash: 833d830e0152d1e457fa7856e71e11248ccf3f70 build by root@db01.mysql.com, 2015-06-24 13:47:15
m:res cs ro ds p mounted fstype
0:r0 Connected Secondary/Secondary Inconsistent/Inconsistent C
cs：表示连接状态
ro: 表示主从关系 上面的表示都为从
ds：硬盘状态信息 上面表示已经实时同步中。Inconsistent：不一致
# cat /proc/drbd
version: 8.4.6 (api:1/proto:86-101)
GIT-hash: 833d830e0152d1e457fa7856e71e11248ccf3f70 build by root@db01.mysql.com, 2015-06-24 13:47:15
0: cs:Connected ro:Primary/Secondary ds:UpToDate/UpToDate C r-----
ns:40088 nr:0 dw:0 dr:40248 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:0
# drbd-overview
0:r0/0 Connected Secondary/Secondary Inconsistent/Inconsistent
--5.3 查看版本号
#cat /proc/drbd
--5.4 查看位置
whereis drbd
----------------------------
6.操作
----------------------------
----6.1 设置节点为主节点
#第1步:设置主从第一次运行
#drbdadm -- --overwrite-data-of-peer primary all
#第2步:第一次运行后寻常运行以下两个当中一个命令
#drbdadm primary --force r0
#drbdadm primary all
#第3步:设置当前节点为主节点
# cat /proc/drbd
version: 8.4.6 (api:1/proto:86-101)
GIT-hash: 833d830e0152d1e457fa7856e71e11248ccf3f70 build by root@db01.mysql.com, 2015-06-24 13:47:15
0: cs:Connected ro:Primary/Secondary ds:UpToDate/UpToDate C r-----
ns:40088 nr:0 dw:0 dr:40248 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:0
#drbdadm primary --force r0
# cat /proc/drbd
version: 8.4.6 (api:1/proto:86-101)
GIT-hash: 833d830e0152d1e457fa7856e71e11248ccf3f70 build by root@db01.mysql.com, 2015-06-24 13:47:15
0: cs:Connected ro:Primary/Secondary ds:UpToDate/UpToDate C r-----
ns:40088 nr:0 dw:0 dr:40248 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:0
说明:ro状态变为ro:Primary/Secondary;ds状态为:UpToDate/UpToDate(inconsisten) 即"实时/实时(不一致)"
-----6.2 磁盘格式化(仅仅对primary节点格式化)
#drbd-overview
0:r0/0 Connected Primary/Secondary UpToDate/UpToDate
同步完毕之后。就能够对空白磁盘格式化了.
#mkfs.ext4 /dev/drbd0
mke2fs 1.41.12 (17-May-2010)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
Stride=0 blocks, Stripe width=0 blocks
10040 inodes, 40088 blocks
2004 blocks (5.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=41156608
5 block groups
8192 blocks per group, 8192 fragments per group
2008 inodes per group
Superblock backups stored on blocks:
8193, 24577
Writing inode tables: done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 33 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
----6.3挂载DRBD分区到本地（仅仅能在primary节点上挂载）
# mkdir /drbd_data
# mount /dev/drbd0 /drbd_data/
# cd /drbd_data/
#ls
----6.4 常见命令
--6.4.1 查看资源角色（前面代表当前资源角色）
# drbdadm role r0
Primary/Secondary
---6.4.2 查看资源连接状态
#drbdadm cstate r0
Connected
---6.4.3 查看硬盘数据状态
# drbdadm dstate r0
UpToDate/UpToDate
----6.4.4 注意事项
1.主备server同步的两个分区大小最好同样（网上没有关于分区大小是否一定要同样的确切说法）
2.開始同步两个节点的磁盘，须要一定时间，在同步完毕前，不要重新启动，否则会又一次同步。
3.挂载之前一定要先切换当前节点为主节点
4.两个节点中，同一时刻仅仅能有一台处于primary状态，还有一台处于secondary状态。
5.处于从节点（secondary）状态的server不能载入drbd块设备
6.将主节点切换为从节点之前要先卸载
7.一台主机切换为主节点之前，要确保还有一台主机已切换为从节点。
----------------------------
7.測试DRBD数据镜像
----------------------------
----7.1格式化挂载磁盘
#mkfs.ext4 /dev/drbd0
# mkdir /drbd_data
# mount /dev/drbd0 /drbd_data/
# cd /drbd_data/
---7.2 生成測试数据
#touch /drbd_data/test.txt
#dd if=/dev/zero of=/drbd_data/test.tmp bs=1M count=20
# drbdadm dstate r0
UpToDate/UpToDate
---7.3 将主节点drbd的状态变为从
# drbdadm role r0
Primary/Secondary
#umount /drbd_data
#drbdadm secondary all
# drbdadm role r0
Secondary/Secondary
---7.4 在从节点上进行挂载
#drbdadm role r0
Secondary/Secondary
#drbdadm primary all
#drbdadm role r0
Primary/Secondary
#mkdir /drbd_data
#mount /dev/drbd0 /drbd_data/
# ls -ls /drbd_data/
total 20493
12 drwx------ 2 root root 12288 Jun 24 17:02 lost+found
20481 -rw-r--r-- 1 root root 20971520 Jun 24 17:20 test.tmp
測试成功.
dbrd 8.4.6 源代码编译安装
声明：以上内容来自用户投稿及互联网公开渠道收集整理发布，本网站不拥有所有权，未作人工编辑处理，也不承担相关法律责任，若内容有误或涉及侵权可进行投诉： 投诉/举报 工作人员会在5个工作日内联系你，一经查实，本站将立刻删除涉嫌侵权内容。