首页 > 代码库 > Pandorabox的cubietruck启动
Pandorabox的cubietruck启动
U-Boot SPL 2014.04 (Oct 31 2014 - 17:02:41)
Board: Cubietruck
DRAM: 2048 MiB
CPU: 960000000Hz, AXI/AHB/APB: 3/2/2
spl: not an uImage at 1600
U-Boot 2014.04 (Oct 31 2014 - 17:02:41) Allwinner Technology
CPU: Allwinner A20 (SUN7I)
Board: Cubietruck
I2C: ready
DRAM: 2 GiB
MMC: SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: dwmac.1c50000
Hit any key to stop autoboot: 0
reading uEnv.txt
240 bytes read in 16 ms (14.6 KiB/s)
Loaded environment from uEnv.txt
Running uenvcmd ...
reading uImage
2540384 bytes read in 293 ms (8.3 MiB/s)
reading dtb
23026 bytes read in 29 ms (775.4 KiB/s)
## Booting kernel from Legacy Image at 46000000 ...
Image Name: ARM OpenWrt Linux-3.14.18
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2540320 Bytes = 2.4 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... S倐率2
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.18 (hades@PandoraBox-Server) (gcc version 4.8.3 (PandoraBox/Linaro GCC 4.8-2014.04 svn-r173) ) #5 SMP PREEMPT Tue Nov 4 14:08:28 CST 2014
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Cubietech Cubietruck
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] PERCPU: Embedded 7 pages/cpu @ee7d6000 s7104 r8192 d13376 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768
[ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk rootwait root=/dev/mmcblk0p2
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 2074212K/2097152K available (3603K kernel code, 161K rwdata, 1016K rodata, 182K init, 602K bss, 22940K reserved, 1318912K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc048af04 (4620 kB)
[ 0.000000] .init : 0xc048b000 - 0xc04b8bc0 ( 183 kB)
[ 0.000000] .data : 0xc04ba000 - 0xc04e2660 ( 162 kB)
[ 0.000000] .bss : 0xc04e2660 - 0xc057921c ( 603 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000023] sched_clock: 32 bits at 24MHz, resolution 41ns墮
[ 0.137688] usbcore: registered new interface driver hub
[ 0.137821] usbcore: registered new device driver usb
[ 0.137933] pps_core: LinuxPPS API ver. 1 registered
[ 0.137941] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.137966] PTP clock support registered
[ 0.138837] Switched to clocksource timer
[ 0.140352] Clockevents: could not switch to one-shot mode: dummy_timer is not functional.
[ 0.140371] Could not switch to high resolution mode on CPU 0
[ 0.145793] NET: Registered protocol family 2
[ 0.146788] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.146877] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.146998] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.147074] TCP: reno registered
[ 0.147095] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.147150] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.147466] NET: Registered protocol family 1
[ 0.148773] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.148875] audit: initializing netlink subsys (disabled)
[ 0.148941] audit: type=2000 audit(0.130:1): initialized
[ 0.149514] bounce pool size: 64 pages
[ 0.157330] VFS: Disk quotas dquot_6.5.2
[ 0.157669] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.159574] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.159587] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.160522] msgmni has been set to 1475
[ 0.162407] io scheduler noop registered
[ 0.162425] io scheduler deadline registered
[ 0.162470] io scheduler cfq registered (default)
[ 0.162744] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
[ 0.164994] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 0.206567] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.228851] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A
[ 0.809757] console [ttyS0] enabled
[ 0.834185] 1c28800.serial: ttyS1 at MMIO 0x1c28800 (irq = 35, base_baud = 1500000) is a U6_16550A
[ 0.844075] platform 1c18000.sata: Driver ahci-sunxi requests probe deferral
[ 0.852799] stmmaceth 1c50000.ethernet: no regulator found
[ 0.858340] stmmaceth 1c50000.ethernet: no reset control found
[ 0.864216] Ring mode enabled
[ 0.867271] No HW DMA feature register supported
[ 0.871805] Normal descriptors
[ 0.875128] TX Checksum insertion supported
[ 0.883567] libphy: stmmac: probed
[ 0.886981] eth0: PHY ID 001cc915 at 0 IRQ 0 (stmmac-0:00) active
[ 0.893145] eth0: PHY ID 001cc915 at 1 IRQ 0 (stmmac-0:01)
[ 0.898741] ehci_hcd: USB 2.0 ‘Enhanced‘ Host Controller (EHCI) Driver
[ 0.905303] ehci-platform: EHCI generic platform driver
[ 0.910744] platform 1c14000.usb: Driver ehci-platform requests probe deferral
[ 0.918044] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
[ 0.925491] usbcore: registered new interface driver usb-storage
[ 0.931839] mousedev: PS/2 mouse device common for all mice
[ 0.939064] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 0.947905] sunxi-mmc 1c0f000.mmc: Got CD GPIO #225.
[ 0.953150] sunxi-mmc 1c0f000.mmc: base:0xf00f4000 irq:64
[ 0.959036] platform 1c12000.mmc: Driver sunxi-mmc requests probe deferral
[ 0.967189] sunxi-ss 1c15000.crypto-engine: Die ID 0
[ 0.973724] TCP: cubic registered
[ 0.977045] Initializing XFRM netlink socket
[ 0.981426] NET: Registered protocol family 17
[ 0.985969] 8021q: 802.1Q VLAN Support v1.8
[ 0.990246] Registering SWP/SWPB emulation handler
[ 0.995492] registered taskstats version 1
[ 0.999632] regulator-dummy: disabling
[ 1.003968] ahci-5v: 5000 mV
[ 1.007374] usb1-vbus: 5000 mV
[ 1.010944] usb2-vbus: 5000 mV
[ 1.014402] vmmc3: 3300 mV
[ 1.080366] ahci-sunxi 1c18000.sata: controller can‘t do PMP, turning off CAP_PMP
[ 1.087853] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
[ 1.093776] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 1.102757] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
[ 1.113715] scsi0 : ahci_platform
[ 1.117374] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
[ 1.125684] ehci-platform 1c14000.usb: EHCI Host Controller
[ 1.131445] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
[ 1.139291] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000
[ 1.160353] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[ 1.166635] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.174469] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.181720] usb usb1: Product: EHCI Host Controller
[ 1.186621] usb usb1: Manufacturer: Linux 3.14.18 ehci_hcd
[ 1.192130] usb usb1: SerialNumber: 1c14000.usb
[ 1.197207] hub 1-0:1.0: USB hub found
[ 1.201044] hub 1-0:1.0: 1 port detected
[ 1.205604] ehci-platform 1c1c000.usb: EHCI Host Controller
[ 1.211236] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[ 1.219071] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000
[ 1.240327] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[ 1.246597] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.253399] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.260624] usb usb2: Product: EHCI Host Controller
[ 1.265498] usb usb2: Manufacturer: Linux 3.14.18 ehci_hcd
[ 1.272014] usb usb2: SerialNumber: 1c1c000.usb
[ 1.278058] hub 2-0:1.0: USB hub found
[ 1.281865] hub 2-0:1.0: 1 port detected
[ 1.286993] sunxi-mmc 1c12000.mmc: base:0xf0138000 irq:67
[ 1.367527] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 1.480338] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.500424] Waiting for root device /dev/mmcblk0p2...
[ 1.520367] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 1.570326] mmc0: new high speed SDHC card at address 1234
[ 1.576432] mmcblk0: mmc0:1234 SA08G 7.21 GiB
[ 1.582465] mmcblk0: p1 p2
[ 1.615844] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[ 1.623313] Freeing unused kernel memory: 180K (c048b000 - c04b8000)
[ 1.745876] usb 1-1: New USB device found, idVendor=048d, idProduct=1167
[ 1.786200] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.793409] usb 1-1: Product: USB Mass Storage Device
[ 1.798458] usb 1-1: Manufacturer: iTE Tech
[ 1.802655] usb 1-1: SerialNumber: 0000000922310679
[ 1.808352] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 1.817778] scsi1 : usb-storage 1-1:1.0
[ 1.893542] sunxi-mmc 1c12000.mmc: smc 1 err, cmd 8, RTO !!
[ 1.995352] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2.004764] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
procd: Console is alive[ 2.113986] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
procd: - watchdog -
[ 2.128829] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
procd: - ubus -
procd: - init -
Please press Enter to activate this console.
BusyBox v1.22.1 (2014-10-31 17:16:37 CST) built-in shell (ash)
Enter ‘help‘ for a list of built-in commands.
_______________________________________________________________
| ____ _ ____ |
| | _ \ __ _ _ __ __| | ___ _ __ __ _| __ ) _____ __ |
| | |_) / _` | ‘_ \ / _` |/ _ \| ‘__/ _` | _ \ / _ \ \/ / |
| | __/ (_| | | | | (_| | (_) | | | (_| | |_) | (_) > < |
| |_| \__,_|_| |_|\__,_|\___/|_| \__,_|____/ \___/_/\_\ |
| |
| PabdoraBox SDK Plantform |
| Copyright 2013-2014 |
| [ 7.368559] NET: Registered protocol family 10
[ 7.399681] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 7.422771] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 7.450564] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
[ 7.458490] Backport generated by backports.git backports-20140320-37-g5c33da0
[ 7.488367] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.610091] xt_time: kernel timezone is -0000
[ 7.650566] cfg80211: Calling CRDA to update world regulatory domain
[ 7.670500] cfg80211: World regulatory domain updated:
[ 7.675651] cfg80211: DFS Master region: unset
[ 7.680003] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 7.714448] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.729518] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.744698] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.759926] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.775340] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 7.797717] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 7.820163] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.840577] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 7.855160] PPP generic driver version 2.4.2
[ 7.870573] NET: Registered protocol family 24
[ 7.894962] usbcore: registered new interface driver rtl8192cu
procd: - init complete -
Pandorabox的cubietruck启动