HELLO! BOOT0 is starting!

boot0 version : 2.0.0

                      read dram para.

dram driver version: 1.15

dram size =1024MB

0x7b7afe7f

super_standby_flag = 0

Succeed in opening nand flash.

block from 2 to 6

deal block 2

Succeed in reading Boot1 file head.

The size of Boot1 is 0x00068000.

The file stored in 0x00000000 of block 2 is perfect.

Check is correct.

Ready to disable icache.

Succeed in loading Boot1.

Jump to Boot1.

[       0.149] boot1 version : 2.0.0

[       0.158] script installed early ok

[       0.158] pmu type = 3

[       0.160] bat vol = 0 mv

[       0.176] axi:ahb:apb=4:2:2

[       0.176] set dcdc2=1400mv, clock=912M successed

[       0.178] key

[       0.191] no key found

[       0.191] flash init start

[       0.191] NB1 : enter NFB_Init

[       0.194] NB1 : enter phy init

[       0.197] [NAND] nand driver(b) version: 0x0x00000002, 0x0x00000012, data: 0x20130325

[       0.207] get the good blk ratio from hwscan : 944 

[       0.210] NB1 : nand phy init ok

[       2.023] _RepairLogBlkTbl start

[       2.025] [DUBG], check free block 0x000003fd ok!

[       2.514] Log Block Index 0x00000000, LogicBlockNum: 0x00000091, LogBlockType: 0x00000001

[       2.517] log0: 0x0000003e, Log1: 0x000003fd, WriteIndex: 0x00000000

[       2.524] datablock: 0x000003a7, lastusedpage: 0x00000062

[       2.531] [DUBG], check free block 0x000003fc ok!

[       2.923] Log Block Index 0x00000001, LogicBlockNum: 0x00000170, LogBlockType: 0x00000001

[       2.926] log0: 0x000003a8, Log1: 0x000003fc, WriteIndex: 0x00000000

[       2.932] datablock: 0x000000cc, lastusedpage: 0x000000ee

[       2.940] [DUBG], check free block 0x000003f9 ok!

[       3.465] Log Block Index 0x00000002, LogicBlockNum: 0x00000171, LogBlockType: 0x00000001

[       3.468] log0: 0x000003a5, Log1: 0x000003f9, WriteIndex: 0x00000000

[       3.475] datablock: 0x000003b6, lastusedpage: 0x00000032

[       3.482] [DUBG], check free block 0x000003f8 ok!

[       3.934] Log Block Index 0x00000003, LogicBlockNum: 0x000000f0, LogBlockType: 0x00000001

[       3.937] log0: 0x000003ae, Log1: 0x000003f8, WriteIndex: 0x00000000

[       3.943] datablock: 0x000003b7, lastusedpage: 0x0000009a

[       3.949] _RepairLogBlkTbl end

[       4.005] NB1 : init ok

[       4.006] flash init finish

[       4.031] fs init ok

[       4.033] fattype FAT16

[       4.033] fs mount ok

[       4.038] nand good_block_ratio=944

[       4.038] storage_type=0

[       4.083] 13

[       4.235] WRN:L232(Common/ui/display_interface/display_interface.c):fetch script data boot_disp.output_type fail

[       4.240] WRN:L268(Common/ui/display_interface/display_interface.c):fetch script data boot_disp.output_mode fail

[       4.250] WRN:L288(Common/ui/display_interface/display_interface.c):fetch script data boot_disp.auto_hpd fail

[       4.260] lcd0_para.lcd_used=0

[       4.263] 0

[       4.466] 1

[       4.667] 2

[       4.868] 3

[       5.069] 4

[       5.270] 5

[       5.471] tv detect, ret = 0

[       5.471] no device plug

[       5.471] key value = http://www.mamicode.com/0

[       5.474] recovery key high 6, low 4

[       5.577] show pic finish

[       5.577] load kernel start

[       5.607] load kernel successed

[       5.607] start address = 0x4a000000

[       6.373] jump to

U-Boot 2011.09-rc1-00000-g156f5d7-dirty (Aug 16 2013 - 17:10:23) Allwinner Technology 

CPU:   SUNXI Family

Board: SUN7I-EVB

DRAM:  1 GiB

NAND:  [NAND] set nand_good_block_ratio 944 

3776 MiB

In:    serial

Out:   serial

Err:   serial

--------fastboot partitions--------

-total partitions:11-

-name-        -start-       -size-      

bootloader  : 8000          8000        

env         : 10000         8000        

boot        : 18000         8000        

system      : 20000         100000      

data        : 120000        200000      

misc        : 320000        8000        

recovery    : 328000        10000       

cache       : 338000        a0000       

private     : 3d8000        8000        

databk      : 3e0000        80000       

UDISK       : 460000        300000      

-----------------------------------

bootcmd set setargs_nand

Hit any key to stop autoboot:  0 

Starting kernel ...

[    0.700067] aw_pm_init: not support super standby. 

[    0.736718] sw_ahci sw_ahci.0: SATA power enable do not exist!!

[    0.997850] ctp_fetch_sysconfig_para: ctp_unused. 

[    1.038600] [+++BLUESLEEP+++]bluesleep_probe: bluesleep_probe line 639

[    1.038607] 

[    1.047626] [gpio-err] __pio_to_irq: invalid pio to irq

[    2.972625] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen

[    2.980918] ata1: irq_stat 0x00000040, connection status changed

[    2.987656] ata1: SError: { CommWake DevExch }

[    3.686192] init: to sleep 1 seconds.

[    4.690391] init: has waken up.

[    4.694017] init: [william] hdmistatus = 0!

[    4.698712] init: [william] tvstatus = 0!

[    4.703825] init: width = 1280

[    4.707265] init: height = 720

[    4.710695] init: s.st_size = 3686400

[    5.222948] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen

[    5.231232] ata1: irq_stat 0x00000040, connection status changed

[    5.237990] ata1: SError: { CommWake DevExch }

[    5.828229] init: do_umount: /data 

[    6.135101] init: do_umount: /cache 

[    6.235068] init: dont need format /dev/block/UDISK

[    6.242031] init: dont need format /dev/block/private

[    6.268626] init: do_umount: /databk 

[    6.438198] init: cannot find ‘/system/etc/install-recovery.sh‘, disabling ‘flash_recovery‘

[    7.367001] android_usb: already disabled

[    7.371927] init: using deprecated syntax for specifying property ‘sys.usb.config‘, use ${name} instead

[    7.384069] init: using deprecated syntax for specifying property ‘sys.usb.config‘, use ${name} instead

[    7.473275] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen

[    7.493643] ata1: irq_stat 0x00000040, connection status changed

[    7.502565] ata1: SError: { CommWake DevExch }

[    9.772993] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen

[    9.781274] ata1: irq_stat 0x00000040, connection status changed

[    9.788040] ata1: SError: { CommWake DevExch }

[   12.023289] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen

[   12.031608] ata1: irq_stat 0x00000040, connection status changed

[   12.038421] ata1: SError: { CommWake DevExch }

[   14.272529] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen

[   14.280813] ata1: irq_stat 0x00000040, connection status changed

[   14.287660] ata1: SError: { CommWake DevExch }

[   16.532966] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen

[   16.541285] ata1: irq_stat 0x00000040, connection status changed

[   16.548046] ata1: SError: { CommWake DevExch }

[   18.782663] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen

[   18.790936] ata1: irq_stat 0x00000040, connection status changed

[   18.801067] ata1: SError: { CommWake DevExch }

[   21.033287] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen

swiftboard启动信息