首页 > 代码库 > LVS+Keepalived DR模式实现web负载均衡高可用

LVS+Keepalived DR模式实现web负载均衡高可用

一、环境介绍:

lvs_master:192.168.1.18

lvs_backup:192.168.1.19

web1:192.168.1.16

web2:192.168.1.17

vip:192.168.1.20



二、安装:

在两台lvs上安装lvs+keepalived:

yum install lvsadm keepalived -y


在两台web服务器上安装nginx(安装配置略过)


配置keepalived:

主lvs上配置:

vim /etc/keepalived/keepalived.conf

! Configuration File for keepalived

    global_defs {

       notification_email {

       jack_keyang@163.com 

    }

       notification_email_from root@localhost.localdomain 

       smtp_server 127.0.0.1

       smtp_connect_timeout 30

       router_id LVS_1

    }


    vrrp_instance VI_1 {

        state MASTER

        interface eth0

        virtual_router_id 51

        priority 100

        advert_int 1

        authentication {

            auth_type PASS

            auth_pass 1111

        }

        virtual_ipaddress {

            192.168.1.20

        }

    }


    virtual_server 192.168.1.20 80 {

        delay_loop 6

        lb_algo rr    #lvs轮询方式

        lb_kind DR    #lvs工作方式

        nat_mask 255.255.255.255

        protocol TCP 


        real_server 192.168.1.16 80 {

            weight 10

            TCP_CHECK {

                connect_timeout 10

                nb_get_retry 3

                delay_before_retry 3

                connect_port 80

            }

        }


        real_server 192.168.1.17 80 {

            weight 10

            TCP_CHECK {

                connect_timeout 10

                nb_get_retry 3

                delay_before_retry 3

                connect_port 80

            }

        }

}


备lvs上只需修改红色部分即可:

state BACKUP

priority 90


以上部分为lvs机器配置结束

下面为web机器上配置脚本,主要为绑定vip并关闭arp响应

#!/bin/bash

VIP=192.168.1.20

. /etc/rc.d/init.d/functions

case $1 in

start)

    ifconfig lo:0 $VIP netmask 255.255.255.255 broadcast $VIP

    route add -host $VIP dev lo:0

    echo 1 >/proc/sys/net/ipv4/conf/lo/arp_ignore

    echo 2 >/proc/sys/net/ipv4/conf/lo/arp_announce

    echo 1 >/proc/sys/net/ipv4/conf/all/arp_ignore

    echo 2 >/proc/sys/net/ipv4/conf/all/arp_announce

    echo "RealServer Start OK"

    ;;

stop)

    ifconfig lo:0 down

    route del $VIP > /dev/null 2>&1

    echo 0 >/proc/sys/net/ipv4/conf/lo/arp_ignore

    echo 0 >/proc/sys/net/ipv4/conf/lo/arp_announce

    echo 0 >/proc/sys/net/ipv4/conf/all/arp_ignore

    echo 0 >/proc/sys/net/ipv4/conf/all/arp_announce

    echo "RealServer Stoped"

    ;;

*)

    echo "Usage: $0 (start|stop)"

    exit 1

esac

exit 0


因为都是使用内网IP,如果想在外网访问只需将VIP的80端口在路由器上映射即可

本文出自 “人要有梦想,万一实现了呢” 博客,请务必保留此出处http://yangke.blog.51cto.com/9530509/1580940

LVS+Keepalived DR模式实现web负载均衡高可用