首页 > 代码库 > Oracle T4-2用jumpstart方式安装Solaris10
Oracle T4-2用jumpstart方式安装Solaris10
在安装过程中遇到了2个问题
1) 安装时无法识别硬RAID磁盘
T4-2的2块本地盘做了硬RAID,用jumpstart安装时无法识别硬RAID磁盘,报错信息如下:
{0} ok boot net - install nowinBoot device: /pci@400/pci@1/pci@0/pci@4/network@0 File and args: - install nowin1000 Mbps full duplex Link upRequesting Internet Address for 0:10:e0:58:6b:3cRequesting Internet Address for 0:10:e0:58:6b:3c1000 Mbps full duplex Link upSunOS Release 5.10 Version Generic_147440-01 64-bitCopyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved.Configuring devices.WARNING: /pci@400/pci@2/pci@0/pci@e/scsi@0/iport@v0/disk@w3d7467629d73943e,0 (sd5): Corrupt label; wrong magic numberUsing RPC Bootparams for network configuration information.Attempting to configure interface igb3...Skipped interface igb3Attempting to configure interface igb2...Skipped interface igb2Attempting to configure interface igb1...Skipped interface igb1Attempting to configure interface igb0...Configured interface igb0Setting up Java. Please wait...Serial console, reverting to text installBeginning system identification...Searching for configuration file(s)...Using sysid configuration file 192.168.9.20:/jumpstart/Solaris10U10_SPARC/config/cdb0cmsdrc01/sysidcfgSearch complete.Discovering additional network configuration...Completing system identification...Starting remote procedure call (RPC) services: done.System identification complete.Starting Solaris installation program...Searching for JumpStart directory...Using rules.ok from 192.168.9.20:/jumpstart/Solaris10U10_SPARC/config/cdb0cmsdrc01.Checking rules.ok file...Using profile: profileExecuting JumpStart preinstall phase...Searching for SolStart directory...Checking rules.ok file...Using begin script: install_beginUsing finish script: patch_finishExecuting SolStart preinstall phase...Executing begin script "install_begin"...Begin script install_begin execution completed.ERROR: One or more disks are found, but one of the following problems exists: - Hardware failure - The disk(s) available on this system cannot be used to install Solaris Software. They do not have a valid label. If you want to use the disk(s) for the install, use format(1M) to label the disk and restart the installation.Solaris installation program exited.#
根据报错提示,对磁盘做一下label
# formatSearching for disks...donec2t3D7467629D73943Ed0: configured with capacity of 277.99GBAVAILABLE DISK SELECTIONS: 0. c2t3D7467629D73943Ed0 <LSI-LogicalVolume-3000 cyl 65533 alt 2 hd 64 sec 139> /pci@400/pci@2/pci@0/pci@e/scsi@0/iport@v0/disk@w3d7467629d73943e,0Specify disk (enter its number): 0selecting c2t3D7467629D73943Ed0[disk formatted]Disk not labeled. Label it now? y
然后再重新执行一遍jumpstart安装,此次安装正常。
2) 安装时遇到BUG6437646
用jumpstart安装完Solaris10U10,重启后机器会hang在光驱处。以下是boot的过程中的详细信息
{0} ok boot -vBoot device: /pci@400/pci@2/pci@0/pci@e/scsi@0/disk@w3d7467629d73943e,0:a File and args: -vmodule /platform/sun4v/kernel/sparcv9/unix: text at [0x1000000, 0x10c1c1d] data at 0x1800000module /platform/sun4v/kernel/sparcv9/genunix: text at [0x10c1c20, 0x12a6b77] data at 0x1935f40module /platform/sun4v/kernel/misc/sparcv9/platmod: text at [0x12a6b78, 0x12a6b8f] data at 0x198d598module /platform/sun4v/kernel/cpu/sparcv9/SPARC-T4: text at [0x12a6b90, 0x12ad04f] data at 0x198dcc0SunOS Release 5.10 Version Generic_147440-01 64-bitCopyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved.Ethernet address = 0:10:e0:58:6b:3cmem = 133693440K (0x1fe0000000)avail mem = 133925093376root nexus = SPARC T4-2pseudo0 at rootpseudo0 is /pseudoscsi_vhci0 at rootscsi_vhci0 is /scsi_vhcipx0 at root: 0x400 0x0px0 is /pci@400PCI Express-device: pci@2, pcieb1pcieb1 is /pci@400/pci@2PCIE-device: pci@0, pcieb10pcieb10 is /pci@400/pci@2/pci@0PCIE-device: pci@0, pcieb10PCIE-device: pci@e, pcieb14pcieb14 is /pci@400/pci@2/pci@0/pci@ePCIE-device: pci@e, pcieb14/pci@400/pci@2/pci@0/pci@e/scsi@0 (mpt_sas0): mptsas0 supports power management./pci@400/pci@2/pci@0/pci@e/scsi@0 (mpt_sas0): mptsas0 supports power management./pci@400/pci@2/pci@0/pci@e/scsi@0 (mpt_sas0): mpt0 Firmware version v9.5.0.0 (?)/pci@400/pci@2/pci@0/pci@e/scsi@0 (mpt_sas0): mpt0: IOC Operational.PCIE-device: scsi@0, mpt_sas0mpt_sas0 is /pci@400/pci@2/pci@0/pci@e/scsi@0PCIE-device: scsi@0, mpt_sas0mpt_sas1 at mpt_sas0: scsi-iport 1mpt_sas1 is /pci@400/pci@2/pci@0/pci@e/scsi@0/iport@1/pci@400/pci@2/pci@0/pci@e/scsi@0/iport@1 (mpt_sas1) online/pci@400/pci@2/pci@0/pci@e/scsi@0 (mpt_sas0): Volume 897 is optimalpx1 at root: 0x500 0x0px1 is /pci@500PCI Express-device: pci@2, pcieb16pcieb16 is /pci@500/pci@2PCIE-device: pci@0, pcieb21pcieb21 is /pci@500/pci@2/pci@0PCIE-device: pci@0, pcieb21mpt_sas2 at mpt_sas0: scsi-iport 2mpt_sas2 is /pci@400/pci@2/pci@0/pci@e/scsi@0/iport@2/pci@400/pci@2/pci@0/pci@e/scsi@0/iport@2 (mpt_sas2) onlinempt_sas3 at mpt_sas0: scsi-iport 80mpt_sas3 is /pci@400/pci@2/pci@0/pci@e/scsi@0/iport@80/pci@400/pci@2/pci@0/pci@e/scsi@0/iport@80 (mpt_sas3) onlinesd4 at mpt_sas3: unit-address p7,0: p7,0sd4 is /pci@400/pci@2/pci@0/pci@e/scsi@0/iport@80/cdrom@p7,0/pci@400/pci@2/pci@0/pci@e/scsi@0/iport@80/cdrom@p7,0 (sd4) online (启动时hang在此处)
解决办法是拔掉光驱,然后进入系统安装patch147440-03. 或者是直接安装Solaris10U11.
Oracle T4-2用jumpstart方式安装Solaris10
声明:以上内容来自用户投稿及互联网公开渠道收集整理发布,本网站不拥有所有权,未作人工编辑处理,也不承担相关法律责任,若内容有误或涉及侵权可进行投诉: 投诉/举报 工作人员会在5个工作日内联系你,一经查实,本站将立刻删除涉嫌侵权内容。