首页 > 代码库 > 三种方法解决 Failed to start LSB: Bring up/down networking 问题

三种方法解决 Failed to start LSB: Bring up/down networking 问题

感谢朋友支持本博客。欢迎共同探讨交流。因为能力和时间有限,错误之处在所难免。欢迎指正!
假设转载。请保留作者信息。
博客地址:http://blog.csdn.net/qq_21398167

原博文地址:http://blog.csdn.net/qq_21398167/article/details/46694179

《—》

1、运行 service network restart 出现下面错误

Restarting network (via systemctl):  Job for network.service failed. See ‘systemctl status network.service‘ and ‘journalctl -xn‘ for details.

2、依据上面的提示,运行“systemctl status network.service”输出下面的类似信息:

[root@localhost ~]# systemctl status network.service

network.service - LSB: Bring up/down networking

   Loaded: loaded (/etc/rc.d/init.d/network)

   Active: failed (Result: exit-code) since 2014-11-05 15:30:10 CST; 1min 5s ago

 

11 05 15:30:10 localhost.localdomain network[2920]: RTNETLINK answers: File exists

11 05 15:30:10 localhost.localdomain network[2920]: RTNETLINK answers: File exists

11 05 15:30:10 localhost.localdomain network[2920]: RTNETLINK answers: File exists

11 05 15:30:10 localhost.localdomain network[2920]: RTNETLINK answers: File exists

11 05 15:30:10 localhost.localdomain network[2920]: RTNETLINK answers: File exists

11 05 15:30:10 localhost.localdomain network[2920]: RTNETLINK answers: File exists

11 05 15:30:10 localhost.localdomain network[2920]: RTNETLINK answers: File exists

11 05 15:30:10 localhost.localdomain systemd[1]: network.service: control process exited, code=exited status=1

11 05 15:30:10 localhost.localdomain systemd[1]: Failed to start LSB: Bring up/down networking.

11 05 15:30:10 localhost.localdomain systemd[1]: Unit network.service entered failed state.

3、解决的办法(因为centos7中没有70-persistent-net.rules这个文件,复制出来的虚拟机(vmware)须要改动mac地址),就是改动mac地址。

 

4、怎样查看centos7复制出来的虚拟机的mac地址,须要运行 “ip addr”,输出例如以下的类似信息:

[root@localhost ~]# ip addr

1: lo:

    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

    inet 127.0.0.1/8 scope host lo

       valid_lft forever preferred_lft forever

    inet6 ::1/128 scope host

       valid_lft forever preferred_lft forever

2: eno16777736:

    link/ether00:0f:19:10:12:f1 brd ff:ff:ff:ff:ff:ff

    inet 192.168.38.135/24 brd 192.168.38.255 scope global dynamic eno16777736

       valid_lft 1681sec preferred_lft 1681sec

    inet6 fe80::20c:11aa:ae11:4fe4/64 scope link

       valid_lft forever preferred_lft forever

 

注意上面加粗加红的字,这就是新的mac地址。

接下来就剩下改动ifcfg-XXX文件了。仅仅改动HWADDR就能够了。接下来运行service network restart就正常了。


《二》

假设还是启动失败    查看是否有例如以下错误信息

Nov 23 22:09:07 hdcoe02 network[597]: Bringing up loopback interface:  Could not load file ‘/etc/sysconfig/network-scripts/ifcfg-lo‘  

Nov 23 22:09:07 hdcoe02 network[597]: Could not load file ‘/etc/sysconfig/network-scripts/ifcfg-lo‘ 

Nov 23 22:09:08 hdcoe02 network[597]: Could not load file ‘/etc/sysconfig/network-scripts/ifcfg-lo‘ 

Nov 23 22:09:08 hdcoe02 network[597]: Could not load file ‘/etc/sysconfig/network-scripts/ifcfg-lo‘  Nov 23 22:09:08 hdcoe02 network[597]: [  OK  ] 

Nov 23 22:09:08 hdcoe02 network[597]: Bringing up interface enp0s25:  Error: Connection activation failed: Connection ‘enp0s25‘ is not available on the device enp0s25 at this time. 

设定开机启动一个名为NetworkManager-wait-online服务,命令为:

systemctl enable NetworkManager-wait-online.service

《三》

我也是上面方法都測试完了 一直不成功,最后发现时由于在VMware 虚拟机里面的系统  右上角显示的连接都没有连接上,尽管报错都一样,最后我在虚拟机设置里面将原来的网络适配器删掉。又一次建了一个新的网络适配器,这次进去,显示连接成功。再用上面的方法,问题解决。

三种方法解决 Failed to start LSB: Bring up/down networking 问题