一直习惯VS2010开发环境，之前配过一次vs2010的驱动开发环境，重装系统后，又要重新配置，找了好几篇文章，配置都没成功，突然相到之前配置过成功过，直接将原来驱动程序的配置文件拿过来使用就可以了。

当然首先: 打开(生成-->配置管理器) 并新建一个名称为"Dirver"的解决方案配置 从此处复制设置：debug.

此时会在工程目录下成成一个配置文件。 将下面内容复制到配置文件中，关闭工程重新打开即可。

<?xml version="1.0" encoding="utf-8"?>
<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
  <ImportGroup Label="PropertySheets" />
  <PropertyGroup Label="UserMacros" />
  <PropertyGroup>
    <ExecutablePath>D:\WinDDK\7600.16385.1\bin\x86;$(ExecutablePath)</ExecutablePath>
  </PropertyGroup>
  <PropertyGroup>
    <IncludePath>D:\WinDDK\7600.16385.1\inc\api;D:\WinDDK\7600.16385.1\inc\ddk;D:\WinDDK\7600.16385.1\inc\crt;$(IncludePath)</IncludePath>
  </PropertyGroup>
  <PropertyGroup>
    <LibraryPath>D:\WinDDK\7600.16385.1\lib\win7\i386;$(LibraryPath)</LibraryPath>
    <TargetExt>.sys</TargetExt>
    <LinkIncremental>false</LinkIncremental>
  </PropertyGroup>
  <ItemDefinitionGroup>
    <ClCompile>
      <PreprocessorDefinitions>_X86_;DBG</PreprocessorDefinitions>
      <CallingConvention>StdCall</CallingConvention>
    </ClCompile>
    <Link>
      <AdditionalDependencies>ntoskrnl.lib;wdm.lib;wdmsec.lib;wmilib.lib;ndis.lib;Hal.lib;MSVCRT.LIB;LIBCMT.LIB;%(AdditionalDependencies)</AdditionalDependencies>
    </Link>
    <Link>
      <IgnoreAllDefaultLibraries>true</IgnoreAllDefaultLibraries>
      <EnableUAC>false</EnableUAC>
      <SubSystem>Console</SubSystem>
      <EntryPointSymbol>DriverEntry</EntryPointSymbol>
      <BaseAddress>0x10000</BaseAddress>
      <RandomizedBaseAddress>
      </RandomizedBaseAddress>
      <DataExecutionPrevention>
      </DataExecutionPrevention>
      <GenerateDebugInformation>true</GenerateDebugInformation>
    </Link>
  </ItemDefinitionGroup>
  <ItemGroup />
</Project>