首页 > 代码库 > ext3 文件系统中误删文件的恢复方法
ext3 文件系统中误删文件的恢复方法
如果oracle进程已经关闭，无法再通过利用ora_进程跟踪文件句柄进行恢复，那么还有无方法来对误删除的文件进行恢复呢?下面介绍一下用第三方软件进行恢复
--首先确保已经安装了e2fsprogs包
[root@ora10g ext3grep-0.10.2]# rpm -qa | grep e2fsprogs
e2fsprogs-1.39-20.el5
e2fsprogs-devel-1.39-20.el5
e2fsprogs-libs-1.39-20.el5
--软件下载：
http://ext3grep.googlecode.com/files/ext3grep-0.10.2.tar.gz
--用Xshell复制到/opt目录下后编译安装
[root@ora10g ~]# cd /opt/
[root@ora10g opt]# ll
total 500
drwxr-xr-x 3 1000 1000 4096 Aug 26 09:09 ext3grep-0.10.2
-rw-r--r-- 1 root root 236364 Aug 26 09:08 ext3grep-0.10.2.tar.gz
drwxr-xr-x 3 root root 4096 Aug 22 16:44 ORCLfmap
drwxrwxr-x 8 oracle oinstall 4096 Aug 25 11:39 rlwrap-0.37
-rw-r--r-- 1 root root 251438 Aug 25 11:37 rlwrap-0.37.tar.gz
[root@ora10g opt]# cd ext3grep-0.10.2
[root@ora10g ext3grep-0.10.2]# ./configure&&make&&make install
编译过程略……
--查看软件命令使用方法
[root@ora10g ext3grep-0.10.2]# ext3grep --help
Running ext3grep version 0.10.2
Usage: ext3grep [options] [--] device-file
Options:
--version, -[vV] Print version and exit successfully.
--help, Print this help and exit successfully.
--superblock Print contents of superblock in addition to the rest.
If no action is specified then this option is implied.
--print Print content of block or inode, if any.
--ls Print directories with only one line per entry.
This option is often needed to turn on filtering.
--accept filen Accept ‘filen‘ as a legal filename. Can be used multi-
ple times. If you change any --accept you must remove
BOTH stage* files!
--accept-all Simply accept everything as filename.
--journal Show content of journal.
--show-path-inodes Show the inode of each directory component in paths.
Filters:
--group grp Only process group ‘grp‘.
--directory Only process directory inodes.
--after dtime Only entries deleted on or after ‘dtime‘.
--before dtime Only entries deleted before ‘dtime‘.
--deleted Only show/process deleted entries.
--allocated Only show/process allocated inodes/blocks.
--unallocated Only show/process unallocated inodes/blocks.
--reallocated Do not suppress entries with reallocated inodes.
Inodes are considered ‘reallocated‘ if the entry
is deleted but the inode is allocated, but also when
the file type in the dir entry and the inode are
different.
--zeroed-inodes Do not suppress entries with zeroed inodes. Linked
entries are always shown, regardless of this option.
--depth depth Process directories recursively up till a depth
of ‘depth‘.
Actions:
--inode-to-block ino Print the block that contains inode ‘ino‘.
--inode ino Show info on inode ‘ino‘.
If --ls is used and the inode is a directory, then
the filters apply to the entries of the directory.
If you do not use --ls then --print is implied.
--block blk Show info on block ‘blk‘.
If --ls is used and the block is the first block
of a directory, then the filters apply to entries
of the directory.
If you do not use --ls then --print is implied.
--histogram=[atime|ctime|mtime|dtime|group]
Generate a histogram based on the given specs.
Using atime, ctime or mtime will change the
meaning of --after and --before to those times.
--journal-block jblk Show info on journal block ‘jblk‘.
--journal-transaction seq
Show info on transaction with sequence number ‘seq‘.
--dump-names Write the path of files to stdout.
This implies --ls but suppresses it‘s output.
--search-start str Find blocks that start with the fixed string ‘str‘.
--search str Find blocks that contain the fixed string ‘str‘.
--search-inode blk Find inodes that refer to block ‘blk‘.
--search-zeroed-inodes Return allocated inode table entries that are zeroed.
--inode-dirblock-table dir
Print a table for directory path ‘dir‘ of directory
block numbers found and the inodes used for each file.
--show-journal-inodes ino
Show copies of inode ‘ino‘ still in the journal.
--restore-inode ino[@seqnr][,ino[@seqnr],...]
Restore the file(s) with known inode number ‘ino‘.
The restored files are created in ./RESTORED_FILES/
with their inode number as extension (ie, inode.12345).
If ‘@seqnr‘ is provided then (only) the journal entry
with that sequence number is used, otherwise the latest
entry is used (if any). You can use that in the case a
a file was overwritten or truncated, rather than deleted.
--restore-file ‘path‘ [--restore-file ‘path‘ ...]
Will restore file ‘path‘. ‘path‘ is relative to the
root of the partition and does not start with a ‘/‘ (it
must be one of the paths returned by --dump-names).
The restored directory, file or symbolic link is
created in the current directory as ‘RESTORED_FILES/path‘.
--restore-all As --restore-file but attempts to restore everything.
The use of --after is highly recommended because the
attempt to restore very old files will only result in
them being hard linked to a more recently deleted file
and as such polute the output.
--show-hardlinks Show all inodes that are shared by two or more files.
我们看到，还是有很多功能可以用的，这里我们只需用到3个参数：--ls --inode --restore-all
--开始测试
[root@ora10g ~]# mkdir /zlm
[root@ora10g ~]# cd /zlm
[root@ora10g zlm]# dd if=/dev/zero of=test1 bs=8096 count=12800
12800+0 records in
12800+0 records out
103628800 bytes (104 MB) copied, 0.586624 seconds, 177 MB/s
[root@ora10g zlm]# mkfs.ext3 test1
mke2fs 1.39 (29-May-2006)
test1 is not a block special device.
Proceed anyway? (y,n) y
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
25376 inodes, 101200 blocks
5060 blocks (5.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=67371008
13 block groups
8192 blocks per group, 8192 fragments per group
1952 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729
Writing inode tables: done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 27 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
[root@ora10g zlm]# mkdir /oradata/ora10g -p
[root@ora10g zlm]# mount -o loop /zlm/test1 /oradata/ora10g
[root@ora10g zlm]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
ext3 7.7G 5.6G 1.7G 77% /
/dev/sda1 ext3 99M 12M 82M 13% /boot
tmpfs tmpfs 506M 0 506M 0% /dev/shm
[root@ora10g ora10g]# ll
total 12
drwx------ 2 root root 12288 Aug 27 13:59 lost+found
-rw-r--r-- 1 root root 0 Aug 27 14:11 redo01.log
-rw-r--r-- 1 root root 0 Aug 27 14:11 redo02.log
-rw-r--r-- 1 root root 0 Aug 27 14:11 redo03.log
[root@ora10g ora10g]# cat >> redo01.log << EOF
> AB
> EOF
[root@ora10g ora10g]# cat >> redo02.log << EOF
> CD
> EOF
[root@ora10g ora10g]# cat >> redo03.log << EOF
> EF
> EOF
[root@ora10g ora10g]# ll
total 15
drwx------ 2 root root 12288 Aug 27 13:59 lost+found
-rw-r--r-- 1 root root 3 Aug 27 14:12 redo01.log
-rw-r--r-- 1 root root 3 Aug 27 14:12 redo02.log
[root@ora10g ora10g]# ll
total 12
drwx------ 2 root root 12288 Aug 27 13:59 lost+found
[root@ora10g ora10g]# umount /zlm/test1
umount: /oradata/ora10g: device is busy
umount: /oradata/ora10g: device is busy
[root@ora10g ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
ext3 7.7G 5.6G 1.7G 77% /
/dev/sda1 ext3 99M 12M 82M 13% /boot
tmpfs tmpfs 506M 0 506M 0% /dev/shm
[root@ora10g ~]# ext3grep /zlm/test1 --ls --inode 2
Running ext3grep version 0.10.2
Number of groups: 13
Loading group metadata... done
Minimum / maximum journal block: 519 / 4633
Loading journal descriptors... sorting... done
The oldest inode block that is still in the journal, appears to be from 1409119917 = Wed Aug 27 14:11:57 2014
Number of descriptors in journal: 32; min / max sequence numbers: 2 / 10
Inode is Allocated
Finding all blocks that might be directories.
D: block containing directory start, d: block containing more directory entries.
Each plus represents a directory start that references the same inode as a directory start that we found previously.
Searching group 0: DD++
Searching group 1:
Searching group 2:
Searching group 3:
Searching group 4:
Searching group 5:
Searching group 6:
Searching group 7:
Searching group 8:
Searching group 9:
Searching group 10:
Searching group 11:
Searching group 12:
Writing analysis so far to ‘test1.ext3grep.stage1‘. Delete that file if you want to do this stage again.
Result of stage one:
2 inodes are referenced by one or more directory blocks, 2 of those inodes are still allocated.
1 inodes are referenced by more than one directory block, 1 of those inodes is still allocated.
0 blocks contain an extended directory.
Result of stage two:
2 of those inodes could be resolved because they are still allocated.
All directory inodes are accounted for!
Writing analysis so far to ‘test1.ext3grep.stage2‘. Delete that file if you want to do this stage again.
The first block of the directory is 505.
Inode 2 is directory "".
Directory block 505:
.-- File type in dir_entry (r=regular file, d=directory, l=symlink)
| .-- D: Deleted ; R: Reallocated
Indx Next | Inode | Deletion time Mode File name
==========+==========+----------------data-from-inode------+-----------+=========
0 1 d 2 drwxr-xr-x .
1 2 d 2 drwxr-xr-x ..
2 end d 11 drwx------ lost+found
3 4 r 12 D 1409120047 Wed Aug 27 14:14:07 2014 rrw-r--r-- redo01.log
4 5 r 13 D 1409120047 Wed Aug 27 14:14:07 2014 rrw-r--r-- redo02.log
5 end r 14 D 1409120047 Wed Aug 27 14:14:07 2014 rrw-r--r-- redo03.log
Number of groups: 13
Minimum / maximum journal block: 519 / 4633
Loading journal descriptors... sorting... done
The oldest inode block that is still in the journal, appears to be from 1409119917 = Wed Aug 27 14:11:57 2014
Number of descriptors in journal: 32; min / max sequence numbers: 2 / 10
Writing output to directory RESTORED_FILES/
Loading test1.ext3grep.stage2... done
Restoring redo01.log
Restoring redo02.log
Restoring redo03.log
[root@ora10g ~]# ls -la RESTORED_FILES/
total 28
drwxr-xr-x 3 root root 4096 Aug 27 14:17 .
drwxr-x--- 17 root root 4096 Aug 27 14:17 ..
drwx------ 2 root root 4096 Aug 27 13:59 lost+found
-rw-r--r-- 1 root root 3 Aug 27 14:12 redo01.log
-rw-r--r-- 1 root root 3 Aug 27 14:12 redo02.log
[root@ora10g ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
ext3 7.7G 5.6G 1.7G 77% /
/dev/sda1 ext3 99M 12M 82M 13% /boot
tmpfs tmpfs 506M 0 506M 0% /dev/shm
/zlm/test1 ext3 96M 5.6M 86M 7% /oradata/ora10g
[root@ora10g ora10g]# ll
total 15
drwx------ 2 root root 12288 Aug 27 13:59 lost+found
-rw-r--r-- 1 root root 3 Aug 27 14:21 redo01.log
-rw-r--r-- 1 root root 3 Aug 27 14:21 redo02.log
-rw-r--r-- 1 root root 3 Aug 27 14:21 redo03.log
[root@ora10g ora10g]# cat redo01.log redo02.log redo03.log
AB
CD
EF
[root@ora10g ora10g]#
总结：
--首先确保已经安装了e2fsprogs包
[root@ora10g ext3grep-0.10.2]# rpm -qa | grep e2fsprogs
e2fsprogs-1.39-20.el5
e2fsprogs-devel-1.39-20.el5
e2fsprogs-libs-1.39-20.el5
--软件下载：
http://ext3grep.googlecode.com/files/ext3grep-0.10.2.tar.gz
--用Xshell复制到/opt目录下后编译安装
[root@ora10g ~]# cd /opt/
[root@ora10g opt]# ll
total 500
drwxr-xr-x 3 1000 1000 4096 Aug 26 09:09 ext3grep-0.10.2
-rw-r--r-- 1 root root 236364 Aug 26 09:08 ext3grep-0.10.2.tar.gz
drwxr-xr-x 3 root root 4096 Aug 22 16:44 ORCLfmap
drwxrwxr-x 8 oracle oinstall 4096 Aug 25 11:39 rlwrap-0.37
-rw-r--r-- 1 root root 251438 Aug 25 11:37 rlwrap-0.37.tar.gz
[root@ora10g opt]# cd ext3grep-0.10.2
[root@ora10g ext3grep-0.10.2]# ./configure&&make&&make install
编译过程略……
--查看软件命令使用方法
[root@ora10g ext3grep-0.10.2]# ext3grep --help
Running ext3grep version 0.10.2
Usage: ext3grep [options] [--] device-file
Options:
--version, -[vV] Print version and exit successfully.
--help, Print this help and exit successfully.
--superblock Print contents of superblock in addition to the rest.
If no action is specified then this option is implied.
--print Print content of block or inode, if any.
--ls Print directories with only one line per entry.
This option is often needed to turn on filtering.
--accept filen Accept ‘filen‘ as a legal filename. Can be used multi-
ple times. If you change any --accept you must remove
BOTH stage* files!
--accept-all Simply accept everything as filename.
--journal Show content of journal.
--show-path-inodes Show the inode of each directory component in paths.
Filters:
--group grp Only process group ‘grp‘.
--directory Only process directory inodes.
--after dtime Only entries deleted on or after ‘dtime‘.
--before dtime Only entries deleted before ‘dtime‘.
--deleted Only show/process deleted entries.
--allocated Only show/process allocated inodes/blocks.
--unallocated Only show/process unallocated inodes/blocks.
--reallocated Do not suppress entries with reallocated inodes.
Inodes are considered ‘reallocated‘ if the entry
is deleted but the inode is allocated, but also when
the file type in the dir entry and the inode are
different.
--zeroed-inodes Do not suppress entries with zeroed inodes. Linked
entries are always shown, regardless of this option.
--depth depth Process directories recursively up till a depth
of ‘depth‘.
Actions:
--inode-to-block ino Print the block that contains inode ‘ino‘.
--inode ino Show info on inode ‘ino‘.
If --ls is used and the inode is a directory, then
the filters apply to the entries of the directory.
If you do not use --ls then --print is implied.
--block blk Show info on block ‘blk‘.
If --ls is used and the block is the first block
of a directory, then the filters apply to entries
of the directory.
If you do not use --ls then --print is implied.
--histogram=[atime|ctime|mtime|dtime|group]
Generate a histogram based on the given specs.
Using atime, ctime or mtime will change the
meaning of --after and --before to those times.
--journal-block jblk Show info on journal block ‘jblk‘.
--journal-transaction seq
Show info on transaction with sequence number ‘seq‘.
--dump-names Write the path of files to stdout.
This implies --ls but suppresses it‘s output.
--search-start str Find blocks that start with the fixed string ‘str‘.
--search str Find blocks that contain the fixed string ‘str‘.
--search-inode blk Find inodes that refer to block ‘blk‘.
--search-zeroed-inodes Return allocated inode table entries that are zeroed.
--inode-dirblock-table dir
Print a table for directory path ‘dir‘ of directory
block numbers found and the inodes used for each file.
--show-journal-inodes ino
Show copies of inode ‘ino‘ still in the journal.
--restore-inode ino[@seqnr][,ino[@seqnr],...]
Restore the file(s) with known inode number ‘ino‘.
The restored files are created in ./RESTORED_FILES/
with their inode number as extension (ie, inode.12345).
If ‘@seqnr‘ is provided then (only) the journal entry
with that sequence number is used, otherwise the latest
entry is used (if any). You can use that in the case a
a file was overwritten or truncated, rather than deleted.
--restore-file ‘path‘ [--restore-file ‘path‘ ...]
Will restore file ‘path‘. ‘path‘ is relative to the
root of the partition and does not start with a ‘/‘ (it
must be one of the paths returned by --dump-names).
The restored directory, file or symbolic link is
created in the current directory as ‘RESTORED_FILES/path‘.
--restore-all As --restore-file but attempts to restore everything.
The use of --after is highly recommended because the
attempt to restore very old files will only result in
them being hard linked to a more recently deleted file
and as such polute the output.
--show-hardlinks Show all inodes that are shared by two or more files.
我们看到，还是有很多功能可以用的，这里我们只需用到3个参数：--ls --inode --restore-all
--开始测试
[root@ora10g ~]# mkdir /zlm
[root@ora10g ~]# cd /zlm
[root@ora10g zlm]# dd if=/dev/zero of=test1 bs=8096 count=12800
12800+0 records in
12800+0 records out
103628800 bytes (104 MB) copied, 0.586624 seconds, 177 MB/s
[root@ora10g zlm]# mkfs.ext3 test1
mke2fs 1.39 (29-May-2006)
test1 is not a block special device.
Proceed anyway? (y,n) y
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
25376 inodes, 101200 blocks
5060 blocks (5.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=67371008
13 block groups
8192 blocks per group, 8192 fragments per group
1952 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729
Writing inode tables: done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 27 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
[root@ora10g zlm]# mkdir /oradata/ora10g -p
[root@ora10g zlm]# mount -o loop /zlm/test1 /oradata/ora10g
[root@ora10g zlm]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
ext3 7.7G 5.6G 1.7G 77% /
/dev/sda1 ext3 99M 12M 82M 13% /boot
tmpfs tmpfs 506M 0 506M 0% /dev/shm
/zlm/test1 ext3 96M 5.6M 86M 7% /oradata/ora10g
--在挂载好的目录/oradata/ora10g中创建测试文件
[root@ora10g ora10g]# touch redo01.log redo02.log redo03.log[root@ora10g ora10g]# ll
total 12
drwx------ 2 root root 12288 Aug 27 13:59 lost+found
-rw-r--r-- 1 root root 0 Aug 27 14:11 redo01.log
-rw-r--r-- 1 root root 0 Aug 27 14:11 redo02.log
-rw-r--r-- 1 root root 0 Aug 27 14:11 redo03.log
[root@ora10g ora10g]# cat >> redo01.log << EOF
> AB
> EOF
[root@ora10g ora10g]# cat >> redo02.log << EOF
> CD
> EOF
[root@ora10g ora10g]# cat >> redo03.log << EOF
> EF
> EOF
[root@ora10g ora10g]# ll
total 15
drwx------ 2 root root 12288 Aug 27 13:59 lost+found
-rw-r--r-- 1 root root 3 Aug 27 14:12 redo01.log
-rw-r--r-- 1 root root 3 Aug 27 14:12 redo02.log
-rw-r--r-- 1 root root 3 Aug 27 14:12 redo03.log
--模拟误操作，删除/oradata/ora10g下所有文件
[root@ora10g ora10g]# rm -rf *.*[root@ora10g ora10g]# ll
total 12
drwx------ 2 root root 12288 Aug 27 13:59 lost+found
[root@ora10g ora10g]# umount /zlm/test1
umount: /oradata/ora10g: device is busy
umount: /oradata/ora10g: device is busy
[root@ora10g ora10g]# cd ~
[root@ora10g ~]# umount /zlm/test1[root@ora10g ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
ext3 7.7G 5.6G 1.7G 77% /
/dev/sda1 ext3 99M 12M 82M 13% /boot
tmpfs tmpfs 506M 0 506M 0% /dev/shm
[root@ora10g ~]# ext3grep /zlm/test1 --ls --inode 2
Running ext3grep version 0.10.2
Number of groups: 13
Loading group metadata... done
Minimum / maximum journal block: 519 / 4633
Loading journal descriptors... sorting... done
The oldest inode block that is still in the journal, appears to be from 1409119917 = Wed Aug 27 14:11:57 2014
Number of descriptors in journal: 32; min / max sequence numbers: 2 / 10
Inode is Allocated
Finding all blocks that might be directories.
D: block containing directory start, d: block containing more directory entries.
Each plus represents a directory start that references the same inode as a directory start that we found previously.
Searching group 0: DD++
Searching group 1:
Searching group 2:
Searching group 3:
Searching group 4:
Searching group 5:
Searching group 6:
Searching group 7:
Searching group 8:
Searching group 9:
Searching group 10:
Searching group 11:
Searching group 12:
Writing analysis so far to ‘test1.ext3grep.stage1‘. Delete that file if you want to do this stage again.
Result of stage one:
2 inodes are referenced by one or more directory blocks, 2 of those inodes are still allocated.
1 inodes are referenced by more than one directory block, 1 of those inodes is still allocated.
0 blocks contain an extended directory.
Result of stage two:
2 of those inodes could be resolved because they are still allocated.
All directory inodes are accounted for!
Writing analysis so far to ‘test1.ext3grep.stage2‘. Delete that file if you want to do this stage again.
The first block of the directory is 505.
Inode 2 is directory "".
Directory block 505:
.-- File type in dir_entry (r=regular file, d=directory, l=symlink)
| .-- D: Deleted ; R: Reallocated
Indx Next | Inode | Deletion time Mode File name
==========+==========+----------------data-from-inode------+-----------+=========
0 1 d 2 drwxr-xr-x .
1 2 d 2 drwxr-xr-x ..
2 end d 11 drwx------ lost+found
3 4 r 12 D 1409120047 Wed Aug 27 14:14:07 2014 rrw-r--r-- redo01.log
4 5 r 13 D 1409120047 Wed Aug 27 14:14:07 2014 rrw-r--r-- redo02.log
5 end r 14 D 1409120047 Wed Aug 27 14:14:07 2014 rrw-r--r-- redo03.log
[root@ora10g ~]# ll
total 80
-rw------- 1 root root 1618 Aug 22 11:19 anaconda-ks.cfg
drwxr-xr-x 2 root root 4096 Aug 22 12:58 Desktop
-rw-r--r-- 1 root root 39989 Aug 22 11:19 install.log
-rw-r--r-- 1 root root 4270 Aug 22 11:19 install.log.syslog
drwxr-xr-x 3 root root 4096 Aug 27 14:17 RESTORED_FILES
-rw-r--r-- 1 root root 186 Aug 27 14:16 test1.ext3grep.stage1
-rw-r--r-- 1 root root 133 Aug 27 14:16 test1.ext3grep.stage2
test1.ext3grep.stage文件是执行命令后生成的，用来存放扫描信息
--把扫描到的已删除文件恢复出来
[root@ora10g ~]# ext3grep /zlm/test1 --restore-all
Running ext3grep version 0.10.2Number of groups: 13
Minimum / maximum journal block: 519 / 4633
Loading journal descriptors... sorting... done
The oldest inode block that is still in the journal, appears to be from 1409119917 = Wed Aug 27 14:11:57 2014
Number of descriptors in journal: 32; min / max sequence numbers: 2 / 10
Writing output to directory RESTORED_FILES/
Loading test1.ext3grep.stage2... done
Restoring redo01.log
Restoring redo02.log
Restoring redo03.log
[root@ora10g ~]# ls -la RESTORED_FILES/
total 28
drwxr-xr-x 3 root root 4096 Aug 27 14:17 .
drwxr-x--- 17 root root 4096 Aug 27 14:17 ..
drwx------ 2 root root 4096 Aug 27 13:59 lost+found
-rw-r--r-- 1 root root 3 Aug 27 14:12 redo01.log
-rw-r--r-- 1 root root 3 Aug 27 14:12 redo02.log
-rw-r--r-- 1 root root 3 Aug 27 14:12 redo03.log
如果不想全部恢复，那么可以使用--resotre-file filename的方式来恢复，前提是你必须知道哪些是你需要恢复的文件
--重新挂载磁盘并确认已经挂载成功
[root@ora10g ~]# mount -o loop /zlm/test1 /oradata/ora10g[root@ora10g ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
ext3 7.7G 5.6G 1.7G 77% /
/dev/sda1 ext3 99M 12M 82M 13% /boot
tmpfs tmpfs 506M 0 506M 0% /dev/shm
/zlm/test1 ext3 96M 5.6M 86M 7% /oradata/ora10g
--把丢失的文件从RESTORED_FILES中复制到源路径中
[root@ora10g ~]# cp RESTORED_FILES/*.log /oradata/ora10g
[root@ora10g ~]# cd /oradata/ora10g/[root@ora10g ora10g]# ll
total 15
drwx------ 2 root root 12288 Aug 27 13:59 lost+found
-rw-r--r-- 1 root root 3 Aug 27 14:21 redo01.log
-rw-r--r-- 1 root root 3 Aug 27 14:21 redo02.log
-rw-r--r-- 1 root root 3 Aug 27 14:21 redo03.log
[root@ora10g ora10g]# cat redo01.log redo02.log redo03.log
AB
CD
EF
[root@ora10g ora10g]#
总结：
可以看到，之前模拟在文件系统类型为ext3的/zlm/test1分区下rm -f误删除掉的数据文件都是可以恢复出来的，但前提是删除后没有写入操作，如同我们window中删除磁盘上的数据的原理一样，就算是误格式化了分区，只要没有写入过新的数据，还是能通过Easy Recovery之类的软件对数据进行恢复的。所以，当我们在Linux下误删文件，如果这个文件是挂载在某个分区下的，那么请立即卸载该分区，然后通过以上介绍的方法，对数据进行恢复。不过用这种方法恢复，需要你的数据库文件单独挂在在一个分区下，如果是直接用默认的放在/dev/mapper/VolGroup00-LogVol00，我测试过，是无法恢复出文件的，扫描会失败。
在我的实验中，由于是测试环境，没有单独给数据文件分区，只是默认地安装，测试效果可能与实际环境有很大的区别，这里只是提供数据恢复的一种思路。先用创建了一个文件模拟一个磁盘，如：/zlm/test1并把它格式化成ext3grep的文件系统，ext3grep顾名思义，就是用在对ext3文件系统上进行数据文件恢复的工具，对于ext2、xfs等文件系统而言，它就爱莫能助了。当然，我相信还是能有其他方法或工具可以恢复数据的，这里就暂且不研究了。
ext3 文件系统中误删文件的恢复方法
声明：以上内容来自用户投稿及互联网公开渠道收集整理发布，本网站不拥有所有权，未作人工编辑处理，也不承担相关法律责任，若内容有误或涉及侵权可进行投诉： 投诉/举报 工作人员会在5个工作日内联系你，一经查实，本站将立刻删除涉嫌侵权内容。