首页 > 代码库 > (转载)绿色版Mysql的安装配置

(转载)绿色版Mysql的安装配置

本文出自于:http://johnnyhg.javaeye.com/blog/245544

一、下载MySQL
http://www.mysql.org/downloads
我下载的是mysql-noinstall-5.0.67-win32.zip
二、安装过程
 1、解压缩
mysql-noinstall-5.0.67-win32.zip 到一个C盘,重新命名为 MySQL5
      假定MYSQL_HOME=C:/
MySQL5
 2、编辑mysql的运行配置文件my.ini,如果没有,可以拿my-medium.ini复制然后更名成 my.ini
# Example MySQL config file for medium systems.
#
# This is for a system with little memory (32M - 64M) where MySQL plays
# an important part, or systems up to 128M where MySQL is used together with
# other programs (such as a web server)
#
# You can copy this file to
# /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options (in this
# installation this directory is C:/mysql/data) or
# ~/.my.cnf to set user-specific options.
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.

# The following options will be passed to all MySQL clients
[client]
#password    = your_password
port        = 3306
socket        = /tmp/mysql.sock

# Here follows entries for some specific programs

# The MySQL server
[mysqld]
basedir = "C:/MySQL5"
datadir = "C:/MySQL5/data"
default-character-set=utf8

port        = 3306
socket        = /tmp/mysql.sock
skip-locking
key_buffer = 16M
max_allowed_packet = 1M
table_cache = 64
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M

# Dont listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
# 
#skip-networking

# Disable Federated by default
skip-federated

# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id    = 1

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
#    the syntax is:
#
#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
#    where you replace <host>, <user>, <password> by quoted strings and
#    <port> by the masters port number (3306 by default).
#
#    Example:
#
#    CHANGE MASTER TO MASTER_HOST=125.564.12.1, MASTER_PORT=3306,
#    MASTER_USER=joe, MASTER_PASSWORD=secret;
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
#    start replication for the first time (even unsuccessfully, for example
#    if you mistyped the password in master-password and the slave fails to
#    connect), the slave will create a master.info file, and any later
#    change in this file to the variables values below will be ignored and
#    overridden by the content of the master.info file, unless you shutdown
#    the slave server, delete master.info and restart the slaver server.
#    For that reason, you may want to leave the lines below untouched
#    (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id       = 2
#
# The replication master for this slave - required
#master-host     =   <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user     =   <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password =   <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port     =  <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin

# Point the following paths to different dedicated disks
#tmpdir        = /tmp/        
#log-update     = /path-to-dedicated-directory/hostname

# Uncomment the following if you are using BDB tables
#bdb_cache_size = 4M
#bdb_max_lock = 10000

# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = C:/mysql/data/
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = C:/mysql/data/
#innodb_log_arch_dir = C:/mysql/data/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 16M
#innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 5M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates

[isamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[myisamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout
[mysqld]
# 设置mysql的安装目录
basedir=$MYSQL_HOME
# 设置mysql数据库的数据的存放目录,必须是data,或者是//xxx/data
datadir=$MYSQL_HOME/data
# 设置mysql服务器的字符集
default-character-set=utf8
 
[client]
# 设置mysql客户端的字符集
default-character-set=gbk
 
3、安装mysql服务
从MS-DOS窗口进入目录E:/myserver/mysql-5.0.37-win32/bin,运行如下命令:
mysqld --install mysql --defaults-file=C:/MySQL5/my.ini
 
4、启动mysql数据库
还在上面的命令窗口里面,输入命令:net start
mysql
这样就启动了mysql 服务。
 
5、停止服务
执行
net stop mysql 即可

6、删除服务
执行mysqld --remove
mysql 即可
 
7、修改密码
以上安装完毕之后,默认的root用户密码为空的。为了安全起见,需要设置一个root用户的密码。
<STRONG><SPAN style="COLOR: #ffffff" mce_style="COLOR: #ffffff">C:/>cd MySQL5

C:/MySQL5>cd bin

C:/MySQL5/bin>mysql -uroot -p
Enter password:
Welcome to the MySQL monitor.  Commands end with ; or /g.
Your MySQL connection id is 3
Server version: 5.0.67-community-log MySQL Community Edition (GPL)

Type help; or /h for help. Type /c to clear the buffer.

mysql> use mysql
Database changed
mysql> update User set Password=PASSWORD(admin) where User=root;
Query OK, 2 rows affected (0.08 sec)
Rows matched: 2  Changed: 2  Warnings: 0</SPAN>

</STRONG>