1 cp libz.a /usr/local/lib 2 chmod 644 /usr/local/lib/libz.a 3 cp libz.so.1.2.8 /usr/local/lib 4 chmod 755 /usr/local/lib/libz.so.1.2.8 5 cp zlib.3 /usr/local/share/man/man3 6 chmod 644 /usr/local/share/man/man3/zlib.3 7 cp zlib.pc /usr/local/lib/pkgconfig 8 chmod 644 /usr/local/lib/pkgconfig/zlib.pc 9 cp zlib.h zconf.h /usr/local/include10 chmod 644 /usr/local/include/zlib.h /usr/local/include/zconf.h

 1 #include <stdio.h> 2 #include <zlib.h> 3  4 int main(int argc,char **args) 5 { 6     /*原始数据*/ 7     unsigned char strsrc[]="这些是测试数据。123456789 abcdefghigklmnopqrstuvwxyz\n\t\0abcdefghijklmnopqrstuvwxyz\n"; //包含\0字符 8     unsigned char buf[1024]={0}; 9     unsigned char strdst[1024]={0};10     unsigned long srclen=sizeof(strsrc);11     unsigned long buflen=sizeof(buf);12     unsigned long dstlen=sizeof(strdst);13     int i;14     FILE * fp;15 16     printf("源串:");17     for(i=0;i<srclen;++i)18     {19         printf("%c",strsrc[i]);20     }21     printf("原串长度为:%ld\n",srclen);22 23     printf("字符串预计算长度为:%ld\n",compressBound(srclen));24     //压缩25     compress(buf,&buflen,strsrc,srclen);26     printf("压缩后实际长度为:%ld\n",buflen);27     //解压缩28     uncompress(strdst,&dstlen,buf,buflen);29 30     printf("目的串:");31     for(i=0;i<dstlen;++i)32     {33         printf("%c",strdst[i]);34     }35 36     return 0;37 }

 1 //把源缓冲压缩成到目的缓冲,一个函数就完成了 2 int compress (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen); 3  4 //功能和compress函数一样,多了一个参数可以指定压缩质量和压缩数度之间的关系(0-9)。要想得到高的压缩比就要多花时间 5 int compress2 (Bytef *dest, uLongf *destLen,const Bytef *source, uLong sourceLen,int level); 6  7 //计算需要的缓冲区长度. 假设你在压缩之前就想知道你的产度为 sourcelen 的数据压缩后有多大, 可调用这个函数计算一下,这个函数并不能得到精确的结果,但是它可以保证实际输出长度肯定小于它计算出来的长度 8 uLong compressBound (uLong sourceLen); 9 10 //解压缩11 int uncompress (Bytef *dest, uLongf *destLen,const Bytef *source, uLong sourceLen);

 1 #include <stdio.h> 2 #include <zlib.h> 3  4 int main(int argc,char **args) 5 { 6     gzFile file; 7     char str[]="testtest"; 8     file=gzopen("test.gz","wb"); 9     if(NULL==file)10         perror("Can‘t open file");11     gzsetparams(file,2,0);12     gzwrite(file,str,sizeof(str));13     gzclose(file);14     return 0;15 }

 1 #include <stdio.h> 2 #include <zlib.h> 3  4 int main(int argc,char **args) 5 { 6     gzFile file; 7     char str[64]={0}; 8     file=gzopen("test.gz","rb"); 9     if(NULL==file)10         perror("Can‘t open file");11     gzread(file,str,10);12     printf("从文件中读取到的字符:%s.\n",str);13     gzclose(file);14     return 0;15 }

 1 //注意下面介绍到的处理函数，跟一般文件的处理函数是相似的，效果也是差不多的。 2 typedef voidp gzFile; 3  4 //打开一个gzip文件进行读/写,mode和fopen("rb"或" wb")一样.也可以包括压缩级别如:"wb9",或着一个策略"f"作为过滤数据"wb6f", "h"是为了"huffman" 压缩,如:"wb1h".gzopen用于读一个没有gzip格式的文件.gzread直接从没有解压缩的文件中读数据.如果文件不能被打开或是没有足够的内存,gzopen将返回NULL. 5 gzFile gzopen(const char *path,const char *mode); 6  7 //根据文件描述符打开一个gz文件 8 gzFile gzdopen (int fd, const char *mode); 9 10 //动态更新压缩等级和压缩格式 成功返回Z_OK 否则返回Z_STREAM_ERROR11 int gzsetparams (gzFile file, int level, int strategy);12 13 //读取所给的个数len字节。从压缩文件中读取解压后的字符的个数。 如果file不是gzip格式，那么就读取实际的字节个数，而不是解压后的实际个数。成功返回所读取的个数，0表示文件结束，-1表示错误。14 //英文原文 Reads the given number of uncompressed bytes from the compressed file.If the input file was not in gzip format, gzread copies the given number of bytes into the buffer.15 int gzread (gzFile file,voidp buf, unsigned int len);16 17 //写入所给长度的buf字符到file中 成功返回所写入的字符个数，0表示写入失败18 int gzwrite(gzFile file, voidp buf,unsigned int len);19 20 //可以看到下面介绍到的所有函数都跟我们处理普通的文件一样，把函数的gz换成f，是不是就熟悉了许多？大概就是这样吧21 int gzprintf(gzFile file,const char *format, ...);22 int gzputs(gzFile file,const char *s);23 char * gzgets(gzFile file, char *buf,int len);24 int gzputc(gzFile file,int c);25 int gzgetc(gzFile file);26 int gzungetc(int c,gzFile file);27 int gzflush (gzFile file,int flush);28 int gzseek (gzFile file,z_off_t offset, int whence);29 int gzrewind(gzFile file);30 z_off_t gztell(gzFile file);31 int gzeof(gzFile file);32 int gzdirect(gzFile file);33 int gzclose(gzFile file);34 const char * gzerror(gzFile file, int *errnum);35 void gzclearerr(gzFile file);

 1 uLong adler32 (uLong adler,const Bytef *buf, uInt len); 2 //使用方法如下 3 uLong adler=adler32(0L,Z_NULL,0); 4 while(read_buffer(buffer, length) !=EOF) 5 { 6     adler=adler32(adler,buffer,length); 7 } 8 if(adler != original_adler) 9     error();10 11 uLong crc32 (uLong crc,const Bytef *buf,uInt len);12 //使用方法如下13 uLong crc = crc32(0L,Z_NULL,0);14 while(read_buffer(buffer,length)!=EOF)15 {16     crc=crc32(crc,buffer,length);17 }18 if(crc != original_crc)19     error();

 1 typedef struct z_stream_s { 2     Bytef    *next_in;  /* next input byte */ 3     uInt     avail_in;  /* number of bytes available at next_in */ 4     uLong    total_in;  /* total nb of input bytes read so far */ 5  6     Bytef    *next_out; /* next output byte should be put there */ 7     uInt     avail_out; /* remaining free space at next_out */ 8     uLong    total_out; /* total nb of bytes output so far */ 9 10     char     *msg;      /* last error message, NULL if no error */11     struct internal_state FAR *state; /* not visible by applications */12 13     alloc_func zalloc;  /* used to allocate the internal state */14     free_func  zfree;   /* used to free the internal state */15     voidpf     opaque;  /* private data object passed to zalloc and zfree */16 17     int     data_type;  /* best guess about the data type: binary or text */18     uLong   adler;      /* adler32 value of the uncompressed data */19     uLong   reserved;   /* reserved for future use */20 } z_stream;

1 deflateInit() + deflate() + deflateEnd()2 //3个函数结合使用完成压缩功能,具体用法看 example.c 的 test_deflate()函数. 其实compress() 函数内部就是用这3个函数实现的3 4 inflateInit() + inflate() + inflateEnd()5 //上面类似,完成解压缩功能.

  1 /* zpipe.c: example of proper use of zlib‘s inflate() and deflate()  2    Not copyrighted -- provided to the public domain  3    Version 1.4  11 December 2005  Mark Adler */  4   5 /* Version history:  6    1.0  30 Oct 2004  First version  7    1.1   8 Nov 2004  Add void casting for unused return values  8                      Use switch statement for inflate() return values  9    1.2   9 Nov 2004  Add assertions to document zlib guarantees 10    1.3   6 Apr 2005  Remove incorrect assertion in inf() 11    1.4  11 Dec 2005  Add hack to avoid MSDOS end-of-line conversions 12                      Avoid some compiler warnings for input and output buffers 13  */ 14  15 #include <stdio.h> 16 #include <string.h> 17 #include <assert.h> 18 #include "zlib.h" 19  20 #if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__) 21 #  include <fcntl.h> 22 #  include <io.h> 23 #  define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY) 24 #else 25 #  define SET_BINARY_MODE(file) 26 #endif 27  28 #define CHUNK 16384 29  30 /* Compress from file source to file dest until EOF on source. 31    def() returns Z_OK on success, Z_MEM_ERROR if memory could not be 32    allocated for processing, Z_STREAM_ERROR if an invalid compression 33    level is supplied, Z_VERSION_ERROR if the version of zlib.h and the 34    version of the library linked do not match, or Z_ERRNO if there is 35    an error reading or writing the files. */ 36 int def(FILE *source, FILE *dest, int level) 37 { 38     int ret, flush; 39     unsigned have; 40     z_stream strm; 41     unsigned char in[CHUNK]; 42     unsigned char out[CHUNK]; 43  44     /* allocate deflate state */ 45     strm.zalloc = Z_NULL; 46     strm.zfree = Z_NULL; 47     strm.opaque = Z_NULL; 48     ret = deflateInit(&strm, level); 49     if (ret != Z_OK) 50         return ret; 51  52     /* compress until end of file */ 53     do { 54         strm.avail_in = fread(in, 1, CHUNK, source); 55         if (ferror(source)) { 56             (void)deflateEnd(&strm); 57             return Z_ERRNO; 58         } 59         flush = feof(source) ? Z_FINISH : Z_NO_FLUSH; 60         strm.next_in = in; 61  62         /* run deflate() on input until output buffer not full, finish 63            compression if all of source has been read in */ 64         do { 65             strm.avail_out = CHUNK; 66             strm.next_out = out; 67             ret = deflate(&strm, flush);    /* no bad return value */ 68             assert(ret != Z_STREAM_ERROR);  /* state not clobbered */ 69             have = CHUNK - strm.avail_out; 70             if (fwrite(out, 1, have, dest) != have || ferror(dest)) { 71                 (void)deflateEnd(&strm); 72                 return Z_ERRNO; 73             } 74         } while (strm.avail_out == 0); 75         assert(strm.avail_in == 0);     /* all input will be used */ 76  77         /* done when last data in file processed */ 78     } while (flush != Z_FINISH); 79     assert(ret == Z_STREAM_END);        /* stream will be complete */ 80  81     /* clean up and return */ 82     (void)deflateEnd(&strm); 83     return Z_OK; 84 } 85  86 /* Decompress from file source to file dest until stream ends or EOF. 87    inf() returns Z_OK on success, Z_MEM_ERROR if memory could not be 88    allocated for processing, Z_DATA_ERROR if the deflate data is 89    invalid or incomplete, Z_VERSION_ERROR if the version of zlib.h and 90    the version of the library linked do not match, or Z_ERRNO if there 91    is an error reading or writing the files. */ 92 int inf(FILE *source, FILE *dest) 93 { 94     int ret; 95     unsigned have; 96     z_stream strm; 97     unsigned char in[CHUNK]; 98     unsigned char out[CHUNK]; 99 100     /* allocate inflate state */101     strm.zalloc = Z_NULL;102     strm.zfree = Z_NULL;103     strm.opaque = Z_NULL;104     strm.avail_in = 0;105     strm.next_in = Z_NULL;106     ret = inflateInit(&strm);107     if (ret != Z_OK)108         return ret;109 110     /* decompress until deflate stream ends or end of file */111     do {112         strm.avail_in = fread(in, 1, CHUNK, source);113         if (ferror(source)) {114             (void)inflateEnd(&strm);115             return Z_ERRNO;116         }117         if (strm.avail_in == 0)118             break;119         strm.next_in = in;120 121         /* run inflate() on input until output buffer not full */122         do {123             strm.avail_out = CHUNK;//CHUNK=128K124             strm.next_out = out;125             ret = inflate(&strm, Z_NO_FLUSH);126             assert(ret != Z_STREAM_ERROR);  /* state not clobbered */127             switch (ret) {128             case Z_NEED_DICT:129                 ret = Z_DATA_ERROR;     /* and fall through */130             case Z_DATA_ERROR:131             case Z_MEM_ERROR:132                 (void)inflateEnd(&strm);133                 return ret;134             }135             have = CHUNK - strm.avail_out;136             if (fwrite(out, 1, have, dest) != have || ferror(dest)) {137                 (void)inflateEnd(&strm);138                 return Z_ERRNO;139             }140         } while (strm.avail_out == 0);141 142         /* done when inflate() says it‘s done */143     } while (ret != Z_STREAM_END);144 145     /* clean up and return */146     (void)inflateEnd(&strm);147     return ret == Z_STREAM_END ? Z_OK : Z_DATA_ERROR;148 }149 150 /* report a zlib or i/o error */151 void zerr(int ret)152 {153     fputs("zpipe: ", stderr);154     switch (ret) {155     case Z_ERRNO:156         if (ferror(stdin))157             fputs("error reading stdin\n", stderr);158         if (ferror(stdout))159             fputs("error writing stdout\n", stderr);160         break;161     case Z_STREAM_ERROR:162         fputs("invalid compression level\n", stderr);163         break;164     case Z_DATA_ERROR:165         fputs("invalid or incomplete deflate data\n", stderr);166         break;167     case Z_MEM_ERROR:168         fputs("out of memory\n", stderr);169         break;170     case Z_VERSION_ERROR:171         fputs("zlib version mismatch!\n", stderr);172     }173 }174 175 /* compress or decompress from stdin to stdout */176 int main(int argc, char **argv)177 {178     int ret;179 180     /* avoid end-of-line conversions */181     SET_BINARY_MODE(stdin);182     SET_BINARY_MODE(stdout);183 184     /* do compression if no arguments */185     if (argc == 1) {186         ret = def(stdin, stdout, Z_DEFAULT_COMPRESSION);187         if (ret != Z_OK)188             zerr(ret);189         return ret;190     }191 192     /* do decompression if -d specified */193     else if (argc == 2 && strcmp(argv[1], "-d") == 0) {194         ret = inf(stdin, stdout);195         if (ret != Z_OK)196             zerr(ret);197         return ret;198     }199 200     /* otherwise, report usage */201     else {202         fputs("zpipe usage: zpipe [-d] < source > dest\n", stderr);203         return 1;204     }205 }

  1 #include <string.h>  2 #include <stdio.h>  3 #include <stdlib.h>  4 #include <errno.h>  5 #include <sys/types.h>  6 #include <sys/socket.h>  7 #include <netinet/in.h>  8 #include <arpa/inet.h>  9 #include <unistd.h> 10 #include <signal.h> 11 #include <zlib.h> 12 #include <zconf.h> 13  14 void app_exit(); 15 int socket_listen(u_short port); 16 void send_http_head(int clifd); 17 void put_long (unsigned char *string, unsigned long x); 18 int gzip_http_buffer(int clifd,char *msg,int len); 19  20  21 int sockfd; 22 int main(int argc,char **args) 23 { 24     struct sockaddr_in cli_sin; 25     socklen_t cli_len=sizeof(cli_sin); 26     int clifd; 27     char buf[4096]; 28     char msg[4096]="<br><br><h1>Reage Web Server gzip support text!</h1><br/><h1><a href = http://www.mamicode.com/"http://wunaozai.cnblogs.com\">Reage blog</a>"; 29  30     signal(SIGINT,app_exit); 31     sockfd=socket_listen(8080); 32     while(1) 33     { 34         clifd=accept(sockfd,(struct sockaddr *)&cli_sin,&cli_len); 35         printf("连接进来的IP:%s:%u\n",inet_ntoa(cli_sin.sin_addr),ntohs(cli_sin.sin_port)); 36         read(clifd,buf,4096); 37         printf("%s\n",buf); 38         send_http_head(clifd); 39         gzip_http_buffer(clifd,msg,strlen(msg)); 40  41         close(clifd); 42     } 43     close(sockfd); 44     return 0; 45 } 46  47 void put_long (unsigned char *string, unsigned long x)//对于gzip后面的两个字节进行位填充,这里应该是处理大端与小端 48 { 49     string[0] = (x & 0xff); 50     string[1] = ((x >> 8) & 0xff) ; 51     string[2] = ((x >> 16) & 0xff) ; 52     string[3] = ((x >> 24) & 0xff); 53 } 54 /* 55  * 对要发送的msg里面的字符进行压缩发送 56  * gzip格式: http://www.cnblogs.com/witxjp/archive/2003/12/17/1986210.html 57  * */ 58 static const char gzip_header[10]={0x1f,0x8b,0x08,0,0,0,0,0,0,0x03}; 59 int gzip_http_buffer(int clifd,char *msg,int len) 60 { 61     z_stream stream; 62     int ret,flush; 63     char in[4096];//存放输入的数据 64     char send[4096+18];//存放压缩过后的数据 65     unsigned int have; 66     int tmp; 67     memcpy(send,gzip_header,10); 68     memset(in,0,len); 69     stream.zalloc=Z_NULL; 70     stream.zfree=Z_NULL; 71     stream.opaque=Z_NULL; 72     stream.avail_in=0; 73     stream.next_in=Z_NULL; 74     memcpy(in,msg,len); 75     //压缩初始化 76     tmp=deflateInit2(&stream, 77             Z_DEFAULT_COMPRESSION,//压缩级别，从0-9 78             Z_DEFLATED,//压缩方式 79             -MAX_WBITS, 80             8, 81             Z_DEFAULT_STRATEGY); 82     if(Z_OK!=tmp) 83     { 84         perror("deflateInit2 Error"); 85         return 0; 86     } 87     stream.avail_in = len; //要压缩数据的长度 88     stream.next_in = in;    //要压缩数据的首地址 89     stream.avail_out = 4096;  //可存放的最大输出结果的长多。就是压缩后数据的最大长度 90     stream.next_out = send + 10; //存放压缩数据的开始位置，send前十个字节用来放头部 91     ret = deflate (&stream,Z_FINISH); //压缩 92     switch(ret) 93     { 94         case Z_NEED_DICT: 95             ret=Z_DATA_ERROR; 96         case Z_DATA_ERROR: 97         case Z_MEM_ERROR: 98             (void)inflateEnd(&stream); 99             return ret;100     }101     have = 4096 - stream.avail_out;102     unsigned crc = crc32(0L, in, len);103     char * tail = send + 10 + have;104     put_long (tail, crc);105     put_long (tail + 4, len);106     write (clifd, send, have + 18);107     deflateEnd (&stream);108     return 1;109 }110 111 void app_exit()112 {113     signal(SIGINT,SIG_DFL);114     close(sockfd);115     exit(0);116 }117 118 /*119  * 发送一个HTTP头120  * */121 void send_http_head(int clifd)122 {123     char buf[4096];124     memset(buf,0,sizeof(buf));125     sprintf(buf,"HTTP/1.1 200 OK\r\n");126     sprintf(buf,"%sServer:wunaozai.cnblogs.com\r\n",buf);127     sprintf(buf,"%sContent-Encoding: gzip\r\n",buf);//告诉浏览器，我接下来发送的数据是经过gzip压缩过的128     sprintf(buf,"%sContent-Type: text/html\r\n\r\n",buf);129     write(clifd,buf,strlen(buf));130 }131 132 /*133  * 开启服务器监听134  * port:服务器端口135  * 成功返回套接字标识136  * */137 int socket_listen(u_short port)138 {139     struct sockaddr_in sin;140     int on;141     int httpd=socket(PF_INET,SOCK_STREAM,0);142     if(httpd==-1)143         perror("Fail to Socket");144     //init sockaddr_in145     sin.sin_family=AF_INET;146     sin.sin_port=htons(port);147     sin.sin_addr.s_addr=htonl(INADDR_ANY);148     bzero(&(sin.sin_zero),8);149     setsockopt(httpd,SOL_SOCKET,SO_REUSEADDR,&on,sizeof(on));150     if(bind(httpd,(struct sockaddr *)&sin,sizeof(struct sockaddr))==-1)151         perror("Fail to bind");152     //如果port指定为零那么就随机打开一个端口153     if(port==0)154     {155         socklen_t len=sizeof(sin);156         if(getsockname(httpd,(struct sockaddr *)&sin,&len)==-1)157             perror("Fail to getsockname");158         port=ntohs(sin.sin_port);159     }160     if(listen(httpd,100)<0)161         perror("Fail to listen");162     printf("打开端口:%u\n",port);163     return httpd;164 }