首页 > 代码库 > tftp-hpa客户端使用说明
tftp-hpa客户端使用说明
1、板子 sudo apt-get install tftp-hpa
2、主机chmod 777 tftp—dir
3、tftp 192.168.1.122 -c put lib2.tar.gz lib2.tar.gz
参考
1、http://blog.csdn.net/tchonggang77/article/details/7478371
2、http://www.tutorialspoint.com/unix_commands/tftp.htm
tftp [-i] [Host] //全:tftp [-v][-m mode] [host [port]] [-c command]
{get | put} [Source] [Destination]
参数
-i
指 定二进制图像传送模式(也称为八进制模式)。在二进制图像模式下,文件以一个字节为单位进行传输。在传送二进制文件时使用该模式。如果省略了 -i,文件将以 ASCII 模式传送。这是默认的传送模式。该模式将行尾 (EOL) 字符转换为指定计算机的适当格式。传送文本文件时使用该模式。如果文件传送成功,将显示数据传输率。
Host
指定本地或远程计算机。
put
将本地计算机上的 Destination文件 传送到远程计算机上的 Source文件中。因为TFTP不支持用户身份验证,所以用户必须登录到远程计算机,同时文件在远程计算机上必须可写。
get
将远程计算机上的 Destination 文件传送到本地计算机上的 Source 文件中。
Source
指定要传送的文件。
Destination
指定将文件送达的目标文件。如果省略了 Destination,将假定它与 Source 具有相同名称。
#################################
shancy@Computer:~$ tftp 192.168.1.103
tftp> put /home/shancy/111.txt /tftpboot/test
Error code 0: Permission denied
tftp>
{get | put} [Source] [Destination]
参数
-i
指 定二进制图像传送模式(也称为八进制模式)。在二进制图像模式下,文件以一个字节为单位进行传输。在传送二进制文件时使用该模式。如果省略了 -i,文件将以 ASCII 模式传送。这是默认的传送模式。该模式将行尾 (EOL) 字符转换为指定计算机的适当格式。传送文本文件时使用该模式。如果文件传送成功,将显示数据传输率。
Host
指定本地或远程计算机。
put
将本地计算机上的 Destination文件 传送到远程计算机上的 Source文件中。因为TFTP不支持用户身份验证,所以用户必须登录到远程计算机,同时文件在远程计算机上必须可写。
get
将远程计算机上的 Destination 文件传送到本地计算机上的 Source 文件中。
Source
指定要传送的文件。
Destination
指定将文件送达的目标文件。如果省略了 Destination,将假定它与 Source 具有相同名称。
#################################
shancy@Computer:~$ tftp 192.168.1.103
tftp> put /home/shancy/111.txt /tftpboot/test
Error code 0: Permission denied
tftp>
NAME
tftp - Trivial File Transfer Protocol clientSYNOPSIS
tftp [ options... ] [host [port]] [-c command]DESCRIPTION
tftp is a client for the Trivial file Transfer Protocol, which can be used to transfer files to and from remote machines, including some very minimalistic, usually embedded, systems. The remote host may be specified on the command line, in which case tftp uses host as the default host for future transfers (see the connect command below.)OPTIONS
Tag | Description |
---|---|
-4 | Connect with IPv4 only, even if IPv6 support was compiled in. |
-6 | Connect with IPv6 only, if compiled in. |
-c command | |
Execute command as if it had been entered on the tftp prompt. Must be specified last on the command line. | |
-l | Default to literal mode. Used to avoid special processing of ’:’ in a file name. |
-m mode | Set the default transfer mode to mode. This is usually used with -c. |
-R port:port | |
Force the originating port number to be in the specified range of port numbers. | |
-v | Default to verbose mode. |
-V | Print the version number and configuration to standard output, then exit gracefully. |
COMMANDS
Once tftp is running, it issues the prompt tftp> and recognizes the following commands:Tag | Description |
---|---|
? command-name... help command-name... |
|
Print help information | |
ascii | Shorthand for mode ascii. |
binary | Shorthand for mode binary. |
connect host [port] | |
Set the host (and optionally port) for transfers. Note that the TFTP protocol, unlike the FTP protocol, does not maintain connections between transfers; thus, the connectcommand does not actually create a connection, but merely remembers what host is to be used for transfers. You do not have to use the connect command; the remote host can be specified as part of the get or put commands. | |
get file | |
get remotefile localfile | |
get file1 file2 file3... | |
Get a file or set of files from the specified sources. A remote filename can be in one of two forms: a plain filename on the remote host, if the host has already been specified, or a string of the form host:filename to specify both a host and filename at the same time. If the latter form is used, the last hostname specified becomes the default for future transfers. Enable literal mode to prevent special treatment of the ’:’ character (e.g. C:\dir\file). | |
literal | |
Toggle literal mode. When set, this mode prevents special treatment of ’:’ in filenames. | |
mode transfer-mode | |
Specify the mode for transfers; transfer-mode may be one of ascii (or netascii) orbinary (or octet.) The default is ascii. | |
put file | |
put localfile remotefile | |
put file1 file2 file3... remote-directory | |
Put a file or set of files to the specified remote file or directory. The destination can be in one of two forms: a filename on the remote host, if the host has already been specified, or a string of the form host:filename to specify both a host and filename at the same time. If the latter form is used, the hostname specified becomes the default for future transfers. If the remote-directory form is used, the remote host is assumed to be a UNIX system or another system using / as directory separator. Enable literal mode to prevent special treatment of the ’:’ character (e.g. C:\dir\file). | |
quit | Exit tftp. End-of-file will also exit. |
rexmt retransmission-timeout | |
Set the per-packet retransmission timeout, in seconds. | |
status | Show current status. |
timeout total-transmission-timeout | |
Set the total transmission timeout, in seconds. | |
trace | Toggle packet tracing (a debugging feature.) |
verbose | |
Toggle verbose mode. |
NOTES
The TFTP protocol provides no provisions for authentication or security. Therefore, the remote server will probably implement some kinds of access restriction or firewalling. These access restrictions are likely to be site- and server-specific.AUTHOR
This version of tftp is maintained by H. Peter Anvin <hpa@zytor.com>. It was derived from, but has substantially diverged from, an OpenBSD source base, with added patches by Markus Gutschke and Gero Kulhman.SEE ALSO
-
tftpd (8)
tftp-hpa客户端使用说明
声明:以上内容来自用户投稿及互联网公开渠道收集整理发布,本网站不拥有所有权,未作人工编辑处理,也不承担相关法律责任,若内容有误或涉及侵权可进行投诉: 投诉/举报 工作人员会在5个工作日内联系你,一经查实,本站将立刻删除涉嫌侵权内容。