1 /* ***** BEGIN LICENSE BLOCK *****
  2 *
  3 * $Id: bitmap.h,v 1.3 2004/06/30 16:44:52 asuraparaju Exp $ $Name: Dirac_1_0_2 $
  4 *
  5 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
  6 *
  7 * The contents of this file are subject to the Mozilla Public License
  8 * Version 1.1 (the "License"); you may not use this file except in compliance
  9 * with the License. You may obtain a copy of the License at
 10 * http://www.mozilla.org/MPL/
 11 *
 12 * Software distributed under the License is distributed on an "AS IS" basis,
 13 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for
 14 * the specific language governing rights and limitations under the License.
 15 *
 16 * The Original Code is BBC Research and Development code.
 17 *
 18 * The Initial Developer of the Original Code is the British Broadcasting
 19 * Corporation.
 20 * Portions created by the Initial Developer are Copyright (C) 2004.
 21 * All Rights Reserved.
 22 *
 23 * Contributor(s):
 24 *
 25 * Alternatively, the contents of this file may be used under the terms of
 26 * the GNU General Public License Version 2 (the "GPL"), or the GNU Lesser
 27 * Public License Version 2.1 (the "LGPL"), in which case the provisions of
 28 * the GPL or the LGPL are applicable instead of those above. If you wish to
 29 * allow use of your version of this file only under the terms of the either
 30 * the GPL or LGPL and not to allow others to use your version of this file
 31 * under the MPL, indicate your decision by deleting the provisions above
 32 * and replace them with the notice and other provisions required by the GPL
 33 * or LGPL. If you do not delete the provisions above, a recipient may use
 34 * your version of this file under the terms of any one of the MPL, the GPL
 35 * or the LGPL.
 36 * ***** END LICENSE BLOCK ***** */
 37 
 38 /***********************************************************************
 39 File bitmap.h
 40 
 41 Defines bitmap header class for uncompressed image IO.
 42 Bitmap files are native to Windows on X86 and usually have a file
 43 extension .BMP.
 44 
 45 This class only supports uncompressed bitmaps using
 46 24 bits per pixel.These are the common form of .BMP file.
 47 
 48 I have tried to make the class platform independent - no guarantee.
 49 
 50 At present the only useful parameters from the header seem to be the
 51 width and height of the bitmap.
 52 
 53 The bitmap format used (24bit uncompressed)is as follows:
 54 
 55 BitMapFileHeader:   14 bytes
 56     signature:       2 bytes    Always ‘BM‘
 57     fileSize:        4 bytes    File size in bytes
 58     reserved:        2 bytes
 59     reserved:        2 bytes
 60     dataOffset:      4 bytes    Offset of raster data from beginning of file
 61 
 62 BitMapInfoHeader:   40 bytes
 63     size:            4 bytes    Size of InfoHeader = 40
 64     width:           4 bytes    Bitmap width (pixels)
 65     height:          4 bytes    Bitmap height (pixels)
 66     planes:          2 bytes    Number of planes = 1
 67     bitCount:        2 bytes    Bits per pixel = 24
 68     compression:     4 bytes    Type of compression = 0 (no compression)
 69     imageSize:       4 bytes    Bytes of raster image data (including pading)
 70                                 = 0 (valid for uncompressed)
 71     xPixelsPerM      4 bytes    Horizontal pixels per metre (meaningless) = 0
 72     yPixelsPerM      4 bytes    Vertical pixels per metre (meaningless) = 0
 73     coloursUsed      4 bytes    Number of colours used = 0
 74     coloursImportant 4 bytes    Number of important colours = 0
 75 
 76 BitMapLine:         multiple of 4 bytes = height*4*((3*width + 3)/4)
 77     width*BGRTriple 3*Width bytes
 78     padding         Up to 3 bytes
 79 
 80 BGRTriple:           3 bytes
 81     blue:            1 byte
 82     green:           1 byte
 83     red:             1 byte
 84 
 85 Original author: Tim Borer
 86 *********************************************************************/
 87 
 88 #ifndef dirac_utilities_bitmap
 89 #define dirac_utilities_bitmap
 90 
 91 #include <iosfwd>
 92 
 93 namespace dirac_vu { //dirac video utilities namespace
 94 
 95     class BitmapHeader {
 96     public:
 97         BitmapHeader() {}                   //used for reading bitmaps
 98         BitmapHeader(int x, int y): w(x), h(y) {}
 99         int width() const {
100             return w; }
101         void width(int x) {
102             w = x;}
103         int height() const {
104             return h; }
105         void height(int y) {
106             h = y; }
107         //Size of one picture line, in bytes, including padding
108         int lineBufferSize() const {
109             return 4*((3*w + 3)/4); }
110         friend std::ostream& operator<<(std::ostream& stream,
111                                         const BitmapHeader& header) {
112             return header.putTo(stream); }
113         friend std::istream& operator>>(std::istream& stream,
114                                         BitmapHeader& header) {
115             return header.getFrom(stream); }
116     private:
117         std::ostream& putTo(std::ostream& output) const;
118         std::istream& getFrom(std::istream& input);
119         int w;
120         int h;
121     };
122 
123 }  // end namespace dirac_vu
124 
125 #endif // dirac_utilities_bitmap

  1 /* ***** BEGIN LICENSE BLOCK *****
  2 *
  3 * $Id: bitmap.cpp,v 1.3 2004/06/30 16:44:52 asuraparaju Exp $ $Name: Dirac_1_0_2 $
  4 *
  5 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
  6 *
  7 * The contents of this file are subject to the Mozilla Public License
  8 * Version 1.1 (the "License"); you may not use this file except in compliance
  9 * with the License. You may obtain a copy of the License at
 10 * http://www.mozilla.org/MPL/
 11 *
 12 * Software distributed under the License is distributed on an "AS IS" basis,
 13 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for
 14 * the specific language governing rights and limitations under the License.
 15 *
 16 * The Original Code is BBC Research and Development code.
 17 *
 18 * The Initial Developer of the Original Code is the British Broadcasting
 19 * Corporation.
 20 * Portions created by the Initial Developer are Copyright (C) 2004.
 21 * All Rights Reserved.
 22 *
 23 * Contributor(s):
 24 * Tim Borer (Original Author)
 25 *
 26 * Alternatively, the contents of this file may be used under the terms of
 27 * the GNU General Public License Version 2 (the "GPL"), or the GNU Lesser
 28 * Public License Version 2.1 (the "LGPL"), in which case the provisions of
 29 * the GPL or the LGPL are applicable instead of those above. If you wish to
 30 * allow use of your version of this file only under the terms of the either
 31 * the GPL or LGPL and not to allow others to use your version of this file
 32 * under the MPL, indicate your decision by deleting the provisions above
 33 * and replace them with the notice and other provisions required by the GPL
 34 * or LGPL. If you do not delete the provisions above, a recipient may use
 35 * your version of this file under the terms of any one of the MPL, the GPL
 36 * or the LGPL.
 37 * ***** END LICENSE BLOCK ***** */
 38 
 39 #include <ostream>
 40 #include <istream>
 41 
 42 #include <iostream>
 43 
 44 #include "bitmap.h"
 45 
 46 namespace {
 47 
 48     //Funtions to read and write a sequence of little endian bytes,
 49     //stored in a byte array,
 50     //to/from an integer in an endian independent way.
 51     //Functions assume ints are at least 4 bytes.
 52 
 53     int read2bytes(const char* bytes) {
 54         int value=http://www.mamicode.com/0;
 55         value |= (*(bytes+1))& 0xff;
 56         value <<= 8;
 57         value |= ( (*bytes)& 0xff );
 58         return value; }
 59 
 60     int read4bytes(const char* bytes) {
 61         int value=http://www.mamicode.com/0;
 62         value |= (*(bytes+3))& 0xff;
 63         value <<= 8;
 64         value |= (*(bytes+2))& 0xff;
 65         value <<= 8;
 66         value |= (*(bytes+1))& 0xff;
 67         value <<= 8;
 68         value |= ( (*bytes)& 0xff );
 69         return value; }
 70 
 71     void write2bytes(char* bytes, int value) {
 72         (*bytes) = value & 0xff;
 73         value >>= 8;
 74         (*(bytes+1)) = value & 0xff;
 75         value >>= 8;
 76         }
 77 
 78     void write4bytes(char* bytes, int value) {
 79         (*bytes) = value & 0xff;
 80         value >>= 8;
 81         (*(bytes+1)) = value & 0xff;
 82         value >>= 8;
 83         (*(bytes+2)) = value & 0xff;
 84         value >>= 8;
 85         (*(bytes+3)) = value & 0xff;
 86         value >>= 8;
 87         }
 88 
 89 } //end anonymous namespace
 90 
 91 namespace dirac_vu { //dirac video utilities namespace
 92 
 93     std::ostream& BitmapHeader::putTo(std::ostream& output) const {
 94         //Define variables for bitmap parameters
 95         const char signature[2] = { ‘B‘, ‘M‘ };
 96         const int dataOffset = 54;
 97         const int fileSize = dataOffset + height()*lineBufferSize();
 98         const int reserved = 0;
 99         const int size = 40;
100         const int planes = 1;
101         const int bitCount = 24;
102         const int compression = 0;
103         const int imageSize = 0;
104         const int xPixelsPerM = 0, yPixelsPerM = 0;
105         const int coloursUsed = 0 ;
106         const int coloursImportant = 0;
107         //Define buffer to read bytes into.
108         const int bufferSize = 54;
109         char buffer[bufferSize];
110         //Write header parameters into buffer
111         *buffer = signature[0];
112         *(buffer+1) = signature[1];
113         write4bytes(buffer+2, fileSize);
114         write4bytes(buffer+6, reserved);
115         write4bytes(buffer+10, dataOffset);
116         write4bytes(buffer+14, size);
117         write4bytes(buffer+18, width());
118         write4bytes(buffer+22, height());
119         write2bytes(buffer+26, planes);
120         write2bytes(buffer+28, bitCount);
121         write4bytes(buffer+30, compression);
122         write4bytes(buffer+34, imageSize);
123         write4bytes(buffer+38, xPixelsPerM);
124         write4bytes(buffer+42, yPixelsPerM);
125         write4bytes(buffer+46, coloursUsed);
126         write4bytes(buffer+50, coloursImportant);
127         //Do pre & post processing by creating a sentry object
128         std::ostream::sentry s(output);
129         //Check all is well for output
130         if (!s) {
131             output.setstate(std::ios::failbit);
132             return output; }
133         //Use stream buffer directly for efficiency
134         std::streambuf& outbuf = *output.rdbuf();
135         if (outbuf.sputn(buffer, bufferSize) < bufferSize) {
136             output.setstate(std::ios::eofbit);
137             output.setstate(std::ios::failbit); }
138         return output; }
139 
140     std::istream& BitmapHeader::getFrom(std::istream& input) {
141         //Define variables for bitmap parameters
142         char signature[2];
143         int fileSize;
144         int dataOffset;
145         int size;
146         int planes;
147         int bitCount;
148         int compression;
149         int imageSize;
150         int xPixelsPerM, yPixelsPerM;
151         int coloursUsed;
152         int coloursImportant;
153         //Define buffer to read bytes into.
154         const int bufferSize = 54;
155         char buffer[bufferSize];
156         //Ensure pre & post processing by constructing a sentry object
157         //The "true" parameter means "don‘t ignore leading whitespace"
158         std::istream::sentry s(input, true);
159         //Check that all is well for input to start
160         if (!s) {
161             input.setstate(std::ios::failbit);
162             return input; }
163         //Use stream buffer directly to avoid the overhead of sentry
164         //objects created by the unformatted stream I/O functions
165         //First create a reference to the input stream buffer
166         std::streambuf& inbuf = *input.rdbuf();
167         if (inbuf.sgetn(buffer, bufferSize) < bufferSize) {
168             input.setstate(std::ios_base::eofbit);
169             input.setstate(std::ios_base::failbit); }
170         signature[0]=*buffer;
171         signature[1]=*(buffer+1);
172         if ( (signature[0]!=‘B‘) || (signature[1]!=‘M‘) ) input.setstate(std::ios::failbit);
173         fileSize = read4bytes(buffer+2);
174         dataOffset= read4bytes(buffer+10);
175         //Reposition input buffer to skip over extra header data if necessary
176         //Should check success of operation (see The C++ Stand Lib, Josuttis, p665)
177         if (dataOffset>54) inbuf.pubseekoff(dataOffset-54, std::ios_base::cur, std::ios_base::in);
178         size = read4bytes(buffer+14);
179         w = read4bytes(buffer+18);
180         h = read4bytes(buffer+22);
181         if ( fileSize != (dataOffset + height()*lineBufferSize()) ) input.setstate(std::ios::failbit);
182         planes = read2bytes(buffer+26);
183         if ( planes != 1 ) input.setstate(std::ios::failbit);
184         bitCount = read2bytes(buffer+28);
185         if ( bitCount != 24 ) input.setstate(std::ios::failbit);
186         compression = read4bytes(buffer+30);
187         if ( compression != 0 ) input.setstate(std::ios::failbit);
188         imageSize = read4bytes(buffer+34);
189         xPixelsPerM = read4bytes(buffer+38);
190         yPixelsPerM = read4bytes(buffer+42);
191         coloursUsed = read4bytes(buffer+46);
192         coloursImportant = read4bytes(buffer+50);
193         return input; }
194 
195 }  // end namespace dirac_vu