首页 > 代码库 > 在centos5开启telnet服务并验证

在centos5开启telnet服务并验证

2024-08-17 19:35:14   217人阅读

1.安装telnet服务

[root@localhost ~]# yum install telnet

2.检查是否成功安装

[root@localhost ~]# rpm -qa | grep telnet
telnet-0.17-38.el5
telnet-server-0.17-38.el5                                      #####有显示就是正确的

3.修改文件开启服务

[root@localhost home]# vim /etc/xinetd.d/telnet 
# default: on
# description: The telnet server serves telnet sessions; it uses #       unencrypted username/password pairs for authentication.
service telnet
{
        flags           = REUSE
        socket_type     = stream
        wait            = no
        user            = root
        server          = /usr/sbin/in.telnetd
        log_on_failure  += USERID
        disable         = no                              #####是指禁止远方telnet，改为no就是启动
}

[root@localhost xinetd.d]# service  xinetd  restart
停止 xinetd：                                              [确定]
启动 xinetd：                                              [确定]



4.停止iptables、seliunx（可以在iptables中开启telnet的23端口，后面有介绍）

5.测试能否能用root账户telnet（若没配置一般是不行的）

6.修改配置使root登陆

当我们失败后，linux是会记录下失败记录作为日志在/var/log/secure

Oct 26 08:17:57 localhost login: pam_securetty(remote:auth): access denied: tty ‘pts/1‘ is not secure !
Oct 26 08:18:01 localhost login: FAILED LOGIN 1 FROM 192.168.165.1 FOR root, Authentication failure

可以看到没有pts/1所以被拒绝了

我们可以在修改添加一个虚拟线程

[root@localhost xinetd.d]# vi /etc/securetty 

console
vc/1
vc/2
vc/3
vc/4
vc/5
vc/6
vc/7
vc/8
vc/9
vc/10
vc/11
tty1
tty2
tty3
tty4
tty5
tty6
tty7
tty8
tty9
tty10
tty11
pts/1

 

 再次测试

Xshell:\> telnet 192.168.165.136


Connecting to 192.168.165.136:23...
Connection established.
To escape to local shell, press ‘Ctrl+Alt+]‘.
CentOS release 5 (Final)
Kernel 2.6.18-8.el5 on an i686
login: root
Password: 
Last login: Wed Oct 26 08:13:15 from 192.168.165.1
[root@localhost ~]#

 

ps：不建议直接用root登陆，因为telnet是明文传输。建议用一个普通用户登录然后su到root用户权限

 

 7.在有防火墙的情况下配置telnet

修改防火墙配置，添加一条开发telnet的23号端口

[root@localhost ~]# vi /etc/sysconfig/iptables

# Firewall configuration written by system-config-securitylevel
# Manual customization of this file is not recommended.
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:RH-Firewall-1-INPUT - [0:0]
-A INPUT -j RH-Firewall-1-INPUT
-A FORWARD -j RH-Firewall-1-INPUT
-A RH-Firewall-1-INPUT -i lo -j ACCEPT
-A RH-Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT
-A RH-Firewall-1-INPUT -p 50 -j ACCEPT
-A RH-Firewall-1-INPUT -p 51 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 23 -j ACCEPT                   ######开放23号端口
-A RH-Firewall-1-INPUT -p udp --dport 5353 -d 224.0.0.251 -j ACCEPT  
-A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT
-A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
-A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited
COMMIT
~                                                                                                                                                                                                                                
~

 

在centos5开启telnet服务并验证


联系
我们