首页 > 代码库 > A quest for the full InnoDB status

A quest for the full InnoDB status

When running InnoDB you are able to dig into the engine internals, look at various gauges and counters, see past deadlocks and the list of all open transactions. This is in your reach with one simple command -

SHOW ENGINE INNODB STATUS

. On most occasions it works beautifully. The problems appear when you have a large spike in number of connections to MySQL, which often happens when several transactions kill the database performance resulting in very long execution times for even simplest queries, or a huge deadlock.

In such rare cases

SHOW ENGINE INNODB STATUS

often fails to provide the necessary information. The reason is that its output is limited to 64000 bytes, so a long list of transactions or a large deadlock dump may easily exhaust the limit. MySQL in such situation truncates the output so it fits the required size and obviously this is not good since you may lose some valuable information from your sight.

With large deadlocks you can actually deal by intentionally creating a new tiny deadlock which will replace the previous one in the output thus reducing the space occupied by that section of InnoDB status. Baron once wrote an article on how to do this.

There is not such easy way for the long transaction list, but fortunately there are some alternatives to the limited MySQL command output.

First one is that you can have innodb-status-file option set in your my.cnf. This will make InnoDB to write the full status output into

innodb_status.<PID>

file located in MySQL data directory. Unfortunately this is a startup time parameter, so unless you set it early, it will not be available in an emergency situation.

Other possibility is to create a special InnoDB table called innodb_monitor

CREATE TABLE innodb_monitor(a INT) ENGINE=innodb;

Creating it causes the full status to be periodically printed into MySQL error log. You can later disable logging by simply dropping the table. The problem I faced many times is that people do not configure their error log at all, so the messages disappear into nothingness. So what then?

I discovered that InnoDB will still create the status file on disk even if you do not specify innodb-status-file option. The file is actually used for every 

SHOW ENGINE INNODB STATUS

call, so whenever someone runs the command, InnoDB writes the output to that file first and then the stored information is read back to user. To make things more difficult, MySQL keeps the file deleted, so it is not possible access it with a simple catfilename or any other command through the file system. However on many systems such as Linux or Solaris, but possibly also others, there is a relatively simple way to access deleted but not-yet-closed files (file is physically removed only after it is no longer open by any process).

First be sure to run

SHOW ENGINE INNODB STATUS

at least once. Then see what MySQL process ID is:

garfield ~ # ps ax | grep [m]ysqld
11886 ?        Ssl    0:01 /usr/sbin/mysqld --defaults-file=/etc/mysql/my.cnf

In my case the process ID is 11886, so I will be using it in the examples, but you should of course use whatever PS returned to you.

Now you can use /proc to see all the file descriptors that are being kept open by the process. So go to /proc/<PID> and list all the files that were deleted.

garfield ~ # cd /proc/11886/fd
garfield fd # ls -l | grep deleted
lrwx------ 1 root root 64 Oct 31 18:26 12 -> /tmp/iblnLBhO (deleted)
lrwx------ 1 root root 64 Oct 31 18:26 5 -> /tmp/ibuQBSgo (deleted)
lrwx------ 1 root root 64 Oct 31 18:26 6 -> /tmp/ibLVtBuZ (deleted)
lrwx------ 1 root root 64 Oct 31 18:26 7 -> /tmp/ibsMzkIA (deleted)
lrwx------ 1 root root 64 Oct 31 18:26 8 -> /tmp/ibj08Rkc (deleted)

The entries are presented as symbolic links from file descriptor number to a real path as in

12 -> /tmp/iblnLBhO

One of these entries is what you are looking for, it’s often (always?) the file with the lowest file descriptor number, so in my case it should be 5. But of course you can try reading a few first bytes from every such file to discover where InnoDB status is. You can also help yourself with lsof

tool available for many platforms:

garfield fd # lsof -c mysqld | grep deleted
mysqld  11886 mysql    5u   REG             253,10    130932       12 /tmp/ibuQBSgo (deleted)
mysqld  11886 mysql    6u   REG             253,10         0       13 /tmp/ibLVtBuZ (deleted)
mysqld  11886 mysql    7u   REG             253,10         0       14 /tmp/ibsMzkIA (deleted)
mysqld  11886 mysql    8u   REG             253,10         0       15 /tmp/ibj08Rkc (deleted)
mysqld  11886 mysql   12u   REG             253,10         0       16 /tmp/iblnLBhO (deleted)

The 4th column contains file descriptor numbers and in the 7th column there are the file sizes. This makes it obvious that InnoDB status has to be under file descriptor 5 since it’s the only non-zero length file.

So while you are still in /proc/<PID> directory, you can try looking into that file:

garfield fd # cat 5
=====================================
081031 17:57:08 INNODB MONITOR OUTPUT
=====================================
Per second averages calculated from the last 33 seconds
----------
SEMAPHORES
----------
... snip ...

Keep in mind the file will only be refreshed when you run

SHOW ENGINE INNODB STATUS

command.

 

参考:http://www.mysqlperformanceblog.com/2008/10/31/full-innodb-status/