import gevent
 
def task(pid):
    """
    Some non-deterministic task
    """
    gevent.sleep(0.5)
    print(‘Task %s done‘ % pid)
 
def synchronous():
    for i in range(1,10):
        task(i)
 
def asynchronous():
    threads = [gevent.spawn(task, i) for i in range(10)]
    gevent.joinall(threads)
 
print(‘Synchronous:‘)
synchronous()
 
print(‘Asynchronous:‘)
asynchronous()

import socket
 
HOST = ‘localhost‘    # The remote host
PORT = 8001           # The same port as used by the server
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.connect((HOST, PORT))
while True:
    msg = bytes(input(">>:"),encoding="utf8")
    s.sendall(msg)
    data = http://www.mamicode.com/s.recv(1024)>

并发100个sock连接

import socket
import threading

def sock_conn():

    client = socket.socket()

    client.connect(("localhost",8001))
    count = 0
    while True:
        #msg = input(">>:").strip()
        #if len(msg) == 0:continue
        client.send( ("hello %s" %count).encode("utf-8"))

        data = http://www.mamicode.com/client.recv(1024)"[%s]recv from server:" % threading.get_ident(),data.decode()) #结果
        count +=1
    client.close()


for i in range(100):
    t = threading.Thread(target=sock_conn)
    t.start()

set_permissions [-p vhost] {user} {conf} {write} {read}

vhost

The name of the virtual host to which to grant the user access, defaulting to /.

user

The name of the user to grant access to the specified virtual host.

conf

A regular expression matching resource names for which the user is granted configure permissions.

write

A regular expression matching resource names for which the user is granted write permissions.

read

A regular expression matching resource names for which the user is granted read permissions.

 

 

 

消息公平分发

如果Rabbit只管按顺序把消息发到各个消费者身上，不考虑消费者负载的话，很可能出现，一个机器配置不高的消费者那里堆积了很多消息处理不完，同时配置高的消费者却一直很轻松。为解决此问题，可以在各个消费者端，配置perfetch=1,意思就是告诉RabbitMQ在我这个消费者当前消息还没处理完的时候就不要再给我发新消息了。

带消息持久化+公平分发的完整代码

生产者端

消费者端

Publish\Subscribe(消息发布\订阅)　

之前的例子都基本都是1对1的消息发送和接收，即消息只能发送到指定的queue里，但有些时候你想让你的消息被所有的Queue收到，类似广播的效果，这时候就要用到exchange了，

An exchange is a very simple thing. On one side it receives messages from producers and the other side it pushes them to queues. The exchange must know exactly what to do with a message it receives. Should it be appended to a particular queue? Should it be appended to many queues? Or should it get discarded. The rules for that are defined by the exchange type.

Exchange在定义的时候是有类型的，以决定到底是哪些Queue符合条件，可以接收消息

fanout: 所有bind到此exchange的queue都可以接收消息
direct: 通过routingKey和exchange决定的那个唯一的queue可以接收消息
topic:所有符合routingKey(此时可以是一个表达式)的routingKey所bind的queue可以接收消息

　　 表达式符号说明：#代表一个或多个字符，*代表任何字符
      例：#.a会匹配a.a，aa.a，aaa.a等
          *.a会匹配a.a，b.a，c.a等
     注：使用RoutingKey为#，Exchange Type为topic的时候相当于使用fanout　

headers: 通过headers 来决定把消息发给哪些queue

消息publisher

消息subscriber

有选择的接收消息(exchange type=direct)　

RabbitMQ还支持根据关键字发送，即：队列绑定关键字，发送者将数据根据关键字发送到消息exchange，exchange根据 关键字 判定应该将数据发送至指定队列。

publisher

subscriber　

更细致的消息过滤

Although using the direct exchange improved our system, it still has limitations - it can‘t do routing based on multiple criteria.

In our logging system we might want to subscribe to not only logs based on severity, but also based on the source which emitted the log. You might know this concept from the syslog unix tool, which routes logs based on both severity (info/warn/crit...) and facility (auth/cron/kern...).

That would give us a lot of flexibility - we may want to listen to just critical errors coming from ‘cron‘ but also all logs from ‘kern‘.

publisher

subscriber

To receive all the logs run:

python receive_logs_topic.py "#"

To receive all logs from the facility "kern":

python receive_logs_topic.py "kern.*"

Or if you want to hear only about "critical" logs:

python receive_logs_topic.py "*.critical"

You can create multiple bindings:

python receive_logs_topic.py "kern.*" "*.critical"

And to emit a log with a routing key "kern.critical" type:

python emit_log_topic.py "kern.critical" "A critical kernel error"

Remote procedure call (RPC)

To illustrate how an RPC service could be used we‘re going to create a simple client class. It‘s going to expose a method named call which sends an RPC request and blocks until the answer is received:

RPC server

RPC client

Memcached & Redis使用　

memcached 

http://www.cnblogs.com/wupeiqi/articles/5132791.html 　

redis 使用

http://www.cnblogs.com/alex3714/articles/6217453.html　　

Twsited异步网络框架

Twisted是一个事件驱动的网络框架，其中包含了诸多功能，例如：网络协议、线程、数据库管理、网络操作、电子邮件等。　

事件驱动

简而言之，事件驱动分为二个部分：第一，注册事件；第二，触发事件。

自定义事件驱动框架，命名为：“弑君者”：

程序员使用“弑君者框架”：　　

Protocols

Protocols描述了如何以异步的方式处理网络中的事件。HTTP、DNS以及IMAP是应用层协议中的例子。Protocols实现了IProtocol接口，它包含如下的方法：

makeConnection               在transport对象和服务器之间建立一条连接
connectionMade               连接建立起来后调用
dataReceived                 接收数据时调用
connectionLost               关闭连接时调用

Transports

Transports代表网络中两个通信结点之间的连接。Transports负责描述连接的细节，比如连接是面向流式的还是面向数据报的，流控以及可靠性。TCP、UDP和Unix套接字可作为transports的例子。它们被设计为“满足最小功能单元，同时具有最大程度的可复用性”，而且从协议实现中分离出来，这让许多协议可以采用相同类型的传输。Transports实现了ITransports接口，它包含如下的方法：

write                   以非阻塞的方式按顺序依次将数据写到物理连接上
writeSequence           将一个字符串列表写到物理连接上
loseConnection          将所有挂起的数据写入，然后关闭连接
getPeer                 取得连接中对端的地址信息
getHost                 取得连接中本端的地址信息

将transports从协议中分离出来也使得对这两个层次的测试变得更加简单。可以通过简单地写入一个字符串来模拟传输，用这种方式来检查。

EchoServer

EchoClient

运行服务器端脚本将启动一个TCP服务器，监听端口1234上的连接。服务器采用的是Echo协议，数据经TCP transport对象写出。运行客户端脚本将对服务器发起一个TCP连接，回显服务器端的回应然后终止连接并停止reactor事件循环。这里的Factory用来对连接的双方生成protocol对象实例。两端的通信是异步的，connectTCP负责注册回调函数到reactor事件循环中，当socket上有数据可读时通知回调处理。

一个传送文件的例子 

server side 

client side 　　

Twisted深入

http://krondo.com/an-introduction-to-asynchronous-programming-and-twisted/ 

http://blog.csdn.net/hanhuili/article/details/9389433 

SqlAlchemy ORM　　

SQLAlchemy是Python编程语言下的一款ORM框架，该框架建立在数据库API之上，使用关系对象映射进行数据库操作，简言之便是：将对象转换成SQL，然后使用数据API执行SQL并获取执行结果

Dialect用于和数据API进行交流，根据配置文件的不同调用不同的数据库API，从而实现对数据库的操作，如：

步骤一：

使用 Engine/ConnectionPooling/Dialect 进行数据库操作，Engine使用ConnectionPooling连接数据库，然后再通过Dialect执行SQL语句。

步骤二：

使用 Schema Type/SQL Expression Language/Engine/ConnectionPooling/Dialect 进行数据库操作。Engine使用Schema Type创建一个特定的结构对象，之后通过SQL Expression Language将该对象转换成SQL语句，然后通过 ConnectionPooling 连接数据库，再然后通过 Dialect 执行SQL，并获取结果。

增删改查

一个简单的完整例子

更多内容详见：

    http://www.jianshu.com/p/e6bba189fcbd

    http://docs.sqlalchemy.org/en/latest/core/expression_api.html

注：SQLAlchemy无法修改表结构，如果需要可以使用SQLAlchemy开发者开源的另外一个软件Alembic来完成。

步骤三：

使用 ORM/Schema Type/SQL Expression Language/Engine/ConnectionPooling/Dialect 所有组件对数据进行操作。根据类创建对象，对象转换成SQL，执行SQL。

外键关联

A one to many relationship places a foreign key on the child table referencing the parent.relationship() is then specified on the parent, as referencing a collection of items represented by the child

from sqlalchemy import Table, Column, Integer, ForeignKey
from sqlalchemy.orm import relationship
from sqlalchemy.ext.declarative import declarative_base

Base = declarative_base()

To establish a bidirectional relationship in one-to-many, where the “reverse” side is a many to one, specify an additional relationship() and connect the two using therelationship.back_populates parameter:

Child will get a parent attribute with many-to-one semantics.

Alternatively, the backref option may be used on a single relationship() instead of usingback_populates:

附，原生sql join查询

几个Join的区别 http://stackoverflow.com/questions/38549/difference-between-inner-and-outer-joins 

• INNER JOIN: Returns all rows when there is at least one match in BOTH tables
• LEFT JOIN: Return all rows from the left table, and the matched rows from the right table
• RIGHT JOIN: Return all rows from the right table, and the matched rows from the left table

in SQLAchemy

group by 查询

in SQLAchemy

更多ORM内容猛点这里