首页 > 代码库 > SQL点滴24—监测表的变化

SQL点滴24—监测表的变化

2024-08-05 22:18:10   215人阅读

原文:SQL点滴24—监测表的变化（转载）

在网上看到一篇关于监测表中的插入，更新，删除的方法，使用触发器实现的，很有价值。

 

地址：http://www.dbaunion.com/u/livecoach/Blog.aspx/t-19

 

有时候，我们在某一重要的时间段需要监控某张表的变化情况，包含插入、更新、删除。举例来说，当我们把数据导出到外部的系统时，我们希望导出的是全部的数据，而且最好是导出上次导出之后变动的数据。

作为DBA，我们可采传统的触发器操作，来构建一个元数据表或一个时间戳列来监控数据的变化。

代码如下：Code Listing 1

 


该代码在 SQL 2005(SP3), SQL 2008 R2 (RTM with cu5)测试通过

-------------------
--Method 1: TRIGGER
-------------------
--Base Table Definition
IF OBJECT_ID(‘CheckSumTest‘, ‘U‘) IS NOT NULL DROP TABLE CheckSumTest
GO
CREATE TABLE CheckSumTest
(
        id                      int                     IDENTITY(1,1) NOT NULL PRIMARY KEY,
        vc1                     varchar(1)      NOT NULL,
        vc2                     varchar(1)      NOT NULL
)
GO
INSERT dbo.CheckSumTest (vc1, vc2) SELECT ‘a‘, ‘b‘
INSERT dbo.CheckSumTest (vc1, vc2) SELECT ‘b‘, ‘a‘
GO
--Create Audit Summary Table to hold Meta-Data
IF OBJECT_ID(‘dbo.TableAuditSummary‘, ‘U‘) IS NOT NULL DROP TABLE dbo.TableAuditSummary
CREATE TABLE dbo.TableAuditSummary
(       id                      INT                     IDENTITY(1,1)   NOT NULL PRIMARY KEY,
        TableName       sysname         NOT NULL,
        LastUpdate      DATETIME        NOT NULL,
        LastExport      DATETIME        NOT NULL
)
GO
INSERT dbo.TableAuditSummary (TableName, LastUpdate, LastExport) VALUES (‘dbo.CheckSumTest‘, GETDATE(), GETDATE())
GO
--Tables that need exporting
SELECT * FROM dbo.TableAuditSummary WHERE LastUpdate>LastExport
--Create Trigger on all Base Tables
--This fires on any insert/update/delete and writes new LastUpdate column for the table set to Current Date and Time
IF OBJECT_ID(‘dbo.trg_CheckSumTest_MaintainAuditSummary‘, ‘TR‘) IS NOT NULL DROP TRIGGER dbo.trg_CheckSumTest_MaintainAuditSummary
GO
CREATE TRIGGER dbo.trg_CheckSumTest_MaintainAuditSummary
ON dbo.CheckSumTest
AFTER INSERT, UPDATE, DELETE
AS
BEGIN
        IF (object_id(‘dbo.CheckSumTest‘) IS NOT NULL)
                UPDATE dbo.TableAuditSummary SET LastUpdate=GETDATE() WHERE TableName=‘dbo.CheckSumTest‘
END
GO
--Make an Update
UPDATE dbo.CheckSumTest SET vc1=‘b‘, vc2=‘a‘ WHERE id=1
UPDATE dbo.CheckSumTest SET vc1=‘a‘, vc2=‘b‘ WHERE id=2
--Check Meta-Data
SELECT * FROM dbo.TableAuditSummary WHERE LastUpdate>LastExport
--When we have Exported the data, we run the following to reset MetaData
UPDATE dbo.TableAuditSummary SET LastExport=GETDATE() WHERE LastUpdate>LastExport

 


最近我正在读关天SQLSERVER在线帮助（BOL）相关的知识, 我接触到了 SQL Server CHECKSUM(), BINARY_CHECKSUM(), and CHECKSUM_AGG() 这几个函数, 由此突然想到这些函数是不是也可以监控表的数据变化，而事实证明CHECKSUM_AGG() 函数尽管被描述为检测表的变化，但这里不适用.

 

使用 CheckSum() and CheckSum_Agg() 函数
CHECKSUM_AGG() 函数, 在Books OnLine 和许多相关的站点上是这样描述的, 通常用于检测一个表的数据是否更改. 这是一个代替触发器的更好的方法，只是该操作会引起表扫描的操作。于是我这次我仍然使用元数据来跟踪数据的变化，只是新建了列LastChkSum代替了LastUpdate,该列用于保存CHECKSUM_AGG(BINARY_CHECKSUM(*)),它将会在全表中产生一个唯一值，以区别数据的变化情况。

代码如下： Listing 2.

---------------------------------------------
--Method 2 : using CheckSum (not reliable)
---------------------------------------------
--Base Table Definition
IF OBJECT_ID(‘CheckSumTest‘, ‘U‘) IS NOT NULL DROP TABLE CheckSumTest
GO
CREATE TABLE CheckSumTest
(
 id int IDENTITY(1,1) NOT NULL PRIMARY KEY,
 vc1 varchar(1) NOT NULL,
 vc2 varchar(1) NOT NULL
)
GO
INSERT dbo.CheckSumTest (vc1, vc2) SELECT ‘a‘, ‘b‘
INSERT dbo.CheckSumTest (vc1, vc2) SELECT ‘b‘, ‘a‘
GO
--Create Audit Summary Table to hold Meta-Data
IF OBJECT_ID(‘dbo.TableAuditSummary‘, ‘U‘) IS NOT NULL DROP TABLE dbo.TableAuditSummary
CREATE TABLE dbo.TableAuditSummary
( id INT IDENTITY(1,1) NOT NULL PRIMARY KEY,
 TableName sysname NOT NULL,
 LastChkSum INT NOT NULL
)
GO
INSERT dbo.TableAuditSummary (TableName, LastChkSum)
 SELECT ‘dbo.CheckSumTest‘, CHECKSUM_AGG(BINARY_CHECKSUM(*)) FROM dbo.CheckSumTest
GO
--Tables that need exporting
SELECT * FROM dbo.TableAuditSummary WHERE TableName=‘dbo.CheckSumTest‘
 AND LastChkSum<>(SELECT CHECKSUM_AGG(BINARY_CHECKSUM(*)) FROM dbo.CheckSumTest)
UNION ALL
...
--Make a Simple (Single row) Update
UPDATE dbo.CheckSumTest SET vc1=‘c‘, vc2=‘a‘ WHERE id=1
--Tables that need exporting
SELECT * FROM dbo.TableAuditSummary WHERE TableName=‘dbo.CheckSumTest‘
 AND LastChkSum<>(SELECT CHECKSUM_AGG(BINARY_CHECKSUM(*)) FROM dbo.CheckSumTest)
UNION ALL
...
--Reset MetaData
UPDATE dbo.TableAuditSummary SET LastChkSum=(SELECT CHECKSUM_AGG(BINARY_CHECKSUM(*)) FROM dbo.CheckSumTest)
 WHERE TableName=‘dbo.CheckSumTest‘
--Make a Symmetric change
UPDATE dbo.CheckSumTest SET vc1=‘b‘, vc2=‘a‘ WHERE id=1
UPDATE dbo.CheckSumTest SET vc1=‘c‘, vc2=‘a‘ WHERE id=2
--Tables that need exporting (no rows returned as CHECKSUM_AGG() has not changed!!)
SELECT * FROM dbo.TableAuditSummary WHERE TableName=‘dbo.CheckSumTest‘
 AND LastChkSum<>(SELECT CHECKSUM_AGG(BINARY_CHECKSUM(*)) FROM dbo.CheckSumTest)
UNION ALLCode Listing 2

 

正如你所看到的那样，对于单个的变化的情况，CHECKSUM是使用比较好的，但是CHECKSUM_AGG()却不能反应数据的变化

代码如下：Code Listing 3

--Base Table Definition
IF OBJECT_ID(‘CheckSumTest‘, ‘U‘) IS NOT NULL DROP TABLE CheckSumTest
GO
CREATE TABLE CheckSumTest
(
 id int IDENTITY(1,1) NOT NULL PRIMARY KEY,
 vc1 varchar(1) NOT NULL,
 vc2 varchar(1) NOT NULL,
 chksum1 AS (CHECKSUM(id, vc1, vc2)),
 chksum2 AS (BINARY_CHECKSUM(id, vc1, vc2))
)
GO
INSERT dbo.CheckSumTest (vc1, vc2) SELECT ‘a‘, ‘b‘
INSERT dbo.CheckSumTest (vc1, vc2) SELECT ‘b‘, ‘a‘
GO
--Show Computed Columns and CheckSum_Agg() value = http://www.mamicode.com/199555
SELECT * FROM CheckSumTest 
SELECT CHECKSUM_AGG(BINARY_CHECKSUM(*)) FROM CheckSumTest
--Make a Simple (Single row) Update
UPDATE dbo.CheckSumTest SET vc1=‘c‘, vc2=‘a‘ WHERE id=1
--Show Computed Columns and CheckSum_Agg() value = http://www.mamicode.com/204816 (Ok)
SELECT * FROM CheckSumTest 
SELECT CHECKSUM_AGG(BINARY_CHECKSUM(*)) FROM CheckSumTest
--Make a Symmetric change
UPDATE dbo.CheckSumTest SET vc1=‘b‘, vc2=‘a‘ WHERE id=1
UPDATE dbo.CheckSumTest SET vc1=‘c‘, vc2=‘a‘ WHERE id=2
--Show Computed Columns and CheckSum_Agg() value = http://www.mamicode.com/204816 (Not Ok!)
SELECT * FROM CheckSumTest 
SELECT CHECKSUM_AGG(BINARY_CHECKSUM(*)) FROM CheckSumTest

 

我们会发现调整前后 CHECKSUM_AGG(BINARY_CHECKSUM(*)) 的值是一样的，不能区分

 

结论：

CHECKSUM_AGG() 函数尽管被描述为能监测表数据的变化，在实际测试中是不行的。尤其是对表进行对称数据修改时，无法监测

SQL点滴24—监测表的变化


联系
我们