首页 > 代码库 > openstack-nova

openstack-nova

Nova-Masteropenstack-nova-apiopenstack-nova-cellsopenstack-nova-certopenstack-nova-conductoropenstack-nova-consoleopenstack-nova-networkopenstack-nova-novncproxyopenstack-nova-objectstoreopenstack-nova-schedulerNova-computeopenstack-nova-compute

/etc/nova/nova.conf 

[DEFAULT]## Options defined in oslo.messaging## Use durable queues in amqp. (boolean value)# Deprecated group;name - DEFAULT;rabbit_durable_queues#amqp_durable_queues=false# Auto-delete queues in amqp. (boolean value)#amqp_auto_delete=false# Size of RPC connection pool. (integer value)#rpc_conn_pool_size=30# Qpid broker hostname. (string value)#qpid_hostname=localhost# Qpid broker port. (integer value)#qpid_port=5672# Qpid HA cluster host:port pairs. (list value)#qpid_hosts=$qpid_hostname:$qpid_port# Username for Qpid connection. (string value)#qpid_username=# Password for Qpid connection. (string value)#qpid_password=# Space separated list of SASL mechanisms to use for auth.# (string value)#qpid_sasl_mechanisms=# Seconds between connection keepalive heartbeats. (integer# value)#qpid_heartbeat=60# Transport to use, either tcp or ssl. (string value)#qpid_protocol=tcp# Whether to disable the Nagle algorithm. (boolean value)#qpid_tcp_nodelay=true# The number of prefetched messages held by receiver. (integer# value)#qpid_receiver_capacity=1# The qpid topology version to use.  Version 1 is what was# originally used by impl_qpid.  Version 2 includes some# backwards-incompatible changes that allow broker federation# to work.  Users should update to version 2 when they are# able to take everything down, as it requires a clean break.# (integer value)#qpid_topology_version=1# SSL version to use (valid only if SSL enabled). valid values# are TLSv1, SSLv23 and SSLv3. SSLv2 may be available on some# distributions. (string value)#kombu_ssl_version=# SSL key file (valid only if SSL enabled). (string value)#kombu_ssl_keyfile=# SSL cert file (valid only if SSL enabled). (string value)#kombu_ssl_certfile=# SSL certification authority file (valid only if SSL# enabled). (string value)#kombu_ssl_ca_certs=# How long to wait before reconnecting in response to an AMQP# consumer cancel notification. (floating point value)#kombu_reconnect_delay=1.0# The RabbitMQ broker address where a single node is used.# (string value)#rabbit_host=localhost# The RabbitMQ broker port where a single node is used.# (integer value)#rabbit_port=5672# RabbitMQ HA cluster host:port pairs. (list value)#rabbit_hosts=$rabbit_host:$rabbit_port# Connect over SSL for RabbitMQ. (boolean value)#rabbit_use_ssl=false# The RabbitMQ userid. (string value)#rabbit_userid=guest# The RabbitMQ password. (string value)#rabbit_password=guest# the RabbitMQ login method (string value)#rabbit_login_method=AMQPLAIN# The RabbitMQ virtual host. (string value)#rabbit_virtual_host=/# How frequently to retry connecting with RabbitMQ. (integer# value)#rabbit_retry_interval=1# How long to backoff for between retries when connecting to# RabbitMQ. (integer value)#rabbit_retry_backoff=2# Maximum number of RabbitMQ connection retries. Default is 0# (infinite retry count). (integer value)#rabbit_max_retries=0# Use HA queues in RabbitMQ (x-ha-policy: all). If you change# this option, you must wipe the RabbitMQ database. (boolean# value)#rabbit_ha_queues=false# If passed, use a fake RabbitMQ provider. (boolean value)#fake_rabbit=false# ZeroMQ bind address. Should be a wildcard (*), an ethernet# interface, or IP. The "host" option should point or resolve# to this address. (string value)#rpc_zmq_bind_address=*# MatchMaker driver. (string value)#rpc_zmq_matchmaker=oslo.messaging._drivers.matchmaker.MatchMakerLocalhost# ZeroMQ receiver listening port. (integer value)#rpc_zmq_port=9501# Number of ZeroMQ contexts, defaults to 1. (integer value)#rpc_zmq_contexts=1# Maximum number of ingress messages to locally buffer per# topic. Default is unlimited. (integer value)#rpc_zmq_topic_backlog=<None># Directory for holding IPC sockets. (string value)#rpc_zmq_ipc_dir=/var/run/openstack# Name of this node. Must be a valid hostname, FQDN, or IP# address. Must match "host" option, if running Nova. (string# value)#rpc_zmq_host=nova# Seconds to wait before a cast expires (TTL). Only supported# by impl_zmq. (integer value)#rpc_cast_timeout=30# Heartbeat frequency. (integer value)#matchmaker_heartbeat_freq=300# Heartbeat time-to-live. (integer value)#matchmaker_heartbeat_ttl=600# Size of RPC greenthread pool. (integer value)#rpc_thread_pool_size=64# Driver or drivers to handle sending notifications. (multi# valued)#notification_driver=# AMQP topic used for OpenStack notifications. (list value)# Deprecated group;name - [rpc_notifier2]/topics#notification_topics=notifications# Seconds to wait for a response from a call. (integer value)#rpc_response_timeout=60# A URL representing the messaging driver to use and its full# configuration. If not set, we fall back to the rpc_backend# option and driver specific configuration. (string value)#transport_url=<None># The messaging driver to use, defaults to rabbit. Other# drivers include qpid and zmq. (string value)#rpc_backend=rabbit# The default exchange under which topics are scoped. May be# overridden by an exchange name specified in the# transport_url option. (string value)#control_exchange=openstack## Options defined in nova.availability_zones## The availability_zone to show internal services under# (string value)#internal_service_availability_zone=internal# Default compute node availability_zone (string value)#default_availability_zone=nova## Options defined in nova.crypto## Filename of root CA (string value)#ca_file=cacert.pem# Filename of private key (string value)#key_file=private/cakey.pem# Filename of root Certificate Revocation List (string value)#crl_file=crl.pem# Where we keep our keys (string value)#keys_path=$state_path/keys# Where we keep our root CA (string value)#ca_path=$state_path/CA# Should we use a CA for each project? (boolean value)#use_project_ca=false# Subject for certificate for users, %s for project, user,# timestamp (string value)#user_cert_subject=/C=US/ST=California/O=OpenStack/OU=NovaDev/CN=%.16s-%.16s-%s# Subject for certificate for projects, %s for project,# timestamp (string value)#project_cert_subject=/C=US/ST=California/O=OpenStack/OU=NovaDev/CN=project-ca-%.16s-%s## Options defined in nova.exception## Make exception message format errors fatal (boolean value)#fatal_exception_format_errors=false## Options defined in nova.netconf## IP address of this host (string value)#my_ip=10.0.0.1# Name of this node.  This can be an opaque identifier.  It is# not necessarily a hostname, FQDN, or IP address. However,# the node name must be valid within an AMQP key, and if using# ZeroMQ, a valid hostname, FQDN, or IP address (string value)#host=nova# Use IPv6 (boolean value)#use_ipv6=false## Options defined in nova.notifications## If set, send compute.instance.update notifications on# instance state changes.  Valid values are None for no# notifications, "vm_state" for notifications on VM state# changes, or "vm_and_task_state" for notifications on VM and# task state changes. (string value)#notify_on_state_change=<None># If set, send api.fault notifications on caught exceptions in# the API service. (boolean value)#notify_api_faults=false# Default notification level for outgoing notifications# (string value)#default_notification_level=INFO# Default publisher_id for outgoing notifications (string# value)#default_publisher_id=<None>## Options defined in nova.paths## Directory where the nova python module is installed (string# value)#pybasedir=/usr/lib/python/site-packages# Directory where nova binaries are installed (string value)#bindir=/usr/local/bin# Top-level directory for maintaining novas state (string# value)#state_path=/var/lib/nova## Options defined in nova.quota## Number of instances allowed per project (integer value)#quota_instances=10# Number of instance cores allowed per project (integer value)#quota_cores=20# Megabytes of instance RAM allowed per project (integer# value)#quota_ram=51200# Number of floating IPs allowed per project (integer value)#quota_floating_ips=10# Number of fixed IPs allowed per project (this should be at# least the number of instances allowed) (integer value)#quota_fixed_ips=-1# Number of metadata items allowed per instance (integer# value)#quota_metadata_items=128# Number of injected files allowed (integer value)#quota_injected_files=5# Number of bytes allowed per injected file (integer value)#quota_injected_file_content_bytes=10240# Length of injected file path (integer value)# Deprecated group;name - DEFAULT;quota_injected_file_path_bytes#quota_injected_file_path_length=255# Number of security groups per project (integer value)#quota_security_groups=10# Number of security rules per security group (integer value)#quota_security_group_rules=20# Number of key pairs per user (integer value)#quota_key_pairs=100# Number of server groups per project (integer value)#quota_server_groups=10# Number of servers per server group (integer value)#quota_server_group_members=10# Number of seconds until a reservation expires (integer# value)#reservation_expire=86400# Count of reservations until usage is refreshed (integer# value)#until_refresh=0# Number of seconds between subsequent usage refreshes# (integer value)#max_age=0# Default driver to use for quota checks (string value)#quota_driver=nova.quota.DbQuotaDriver## Options defined in nova.service## Seconds between nodes reporting state to datastore (integer# value)#report_interval=10# Enable periodic tasks (boolean value)#periodic_enable=true# Range of seconds to randomly delay when starting the# periodic task scheduler to reduce stampeding. (Disable by# setting to 0) (integer value)#periodic_fuzzy_delay=60# A list of APIs to enable by default (list value)#enabled_apis=ec2,osapi_compute,metadata# A list of APIs with enabled SSL (list value)#enabled_ssl_apis=# The IP address on which the EC2 API will listen. (string# value)#ec2_listen=0.0.0.0# The port on which the EC2 API will listen. (integer value)#ec2_listen_port=8773# Number of workers for EC2 API service. The default will be# equal to the number of CPUs available. (integer value)#ec2_workers=<None># The IP address on which the OpenStack API will listen.# (string value)#osapi_compute_listen=0.0.0.0# The port on which the OpenStack API will listen. (integer# value)#osapi_compute_listen_port=8774# Number of workers for OpenStack API service. The default# will be the number of CPUs available. (integer value)#osapi_compute_workers=<None># OpenStack metadata service manager (string value)#metadata_manager=nova.api.manager.MetadataManager# The IP address on which the metadata API will listen.# (string value)#metadata_listen=0.0.0.0# The port on which the metadata API will listen. (integer# value)#metadata_listen_port=8775# Number of workers for metadata service. The default will be# the number of CPUs available. (integer value)#metadata_workers=<None># Full class name for the Manager for compute (string value)#compute_manager=nova.compute.manager.ComputeManager# Full class name for the Manager for console proxy (string# value)#console_manager=nova.console.manager.ConsoleProxyManager# Manager for console auth (string value)#consoleauth_manager=nova.consoleauth.manager.ConsoleAuthManager# Full class name for the Manager for cert (string value)#cert_manager=nova.cert.manager.CertManager# Full class name for the Manager for network (string value)#network_manager=nova.network.manager.FlatDHCPManager# Full class name for the Manager for scheduler (string value)#scheduler_manager=nova.scheduler.manager.SchedulerManager# Maximum time since last check-in for up service (integer# value)#service_down_time=60## Options defined in nova.test## File name of clean sqlite db (string value)#sqlite_clean_db=clean.sqlite## Options defined in nova.utils## Whether to log monkey patching (boolean value)#monkey_patch=false# List of modules/decorators to monkey patch (list value)#monkey_patch_modules=nova.api.ec2.cloud:nova.notifications.notify_decorator,nova.compute.api:nova.notifications.notify_decorator# Length of generated instance admin passwords (integer value)#password_length=12# Time period to generate instance usages for.  Time period# must be hour, day, month or year (string value)#instance_usage_audit_period=month# Path to the rootwrap configuration file to use for running# commands as root (string value)#rootwrap_config=/etc/nova/rootwrap.conf# Explicitly specify the temporary working directory (string# value)#tempdir=<None>## Options defined in nova.wsgi## File name for the paste.deploy config for nova-api (string# value)#api_paste_config=api-paste.ini# A python format string that is used as the template to# generate log lines. The following values can be formatted# into it: client_ip, date_time, request_line, status_code,# body_length, wall_seconds. (string value)#wsgi_log_format=%(client_ip)s "%(request_line)s" status: %(status_code)s len: %(body_length)s time: %(wall_seconds).7f# CA certificate file to use to verify connecting clients# (string value)#ssl_ca_file=<None># SSL certificate of API server (string value)#ssl_cert_file=<None># SSL private key of API server (string value)#ssl_key_file=<None># Sets the value of TCP_KEEPIDLE in seconds for each server# socket. Not supported on OS X. (integer value)#tcp_keepidle=600# Size of the pool of greenthreads used by wsgi (integer# value)#wsgi_default_pool_size=1000# Maximum line size of message headers to be accepted.# max_header_line may need to be increased when using large# tokens (typically those generated by the Keystone v3 API# with big service catalogs). (integer value)#max_header_line=16384## Options defined in nova.api.auth## Whether to use per-user rate limiting for the api. This# option is only used by v2 api. Rate limiting is removed from# v3 api. (boolean value)#api_rate_limit=false# The strategy to use for auth: noauth or keystone. (string# value)#auth_strategy=keystone# Treat X-Forwarded-For as the canonical remote address. Only# enable this if you have a sanitizing proxy. (boolean value)#use_forwarded_for=false## Options defined in nova.api.ec2## Number of failed auths before lockout. (integer value)#lockout_attempts=5# Number of minutes to lockout if triggered. (integer value)#lockout_minutes=15# Number of minutes for lockout window. (integer value)#lockout_window=15# URL to get token from ec2 request. (string value)#keystone_ec2_url=http://localhost:5000/v2.0/ec2tokens# Return the IP address as private dns hostname in describe# instances (boolean value)#ec2_private_dns_show_ip=false# Validate security group names according to EC2 specification# (boolean value)#ec2_strict_validation=true# Time in seconds before ec2 timestamp expires (integer value)#ec2_timestamp_expiry=300## Options defined in nova.api.ec2.cloud## The IP address of the EC2 API server (string value)#ec2_host=$my_ip# The internal IP address of the EC2 API server (string value)#ec2_dmz_host=$my_ip# The port of the EC2 API server (integer value)#ec2_port=8773# The protocol to use when connecting to the EC2 API server# (http, https) (string value)#ec2_scheme=http# The path prefix used to call the ec2 API server (string# value)#ec2_path=/services/Cloud# List of region=fqdn pairs separated by commas (list value)#region_list=## Options defined in nova.api.metadata.base## List of metadata versions to skip placing into the config# drive (string value)#config_drive_skip_versions=1.0 2007-01-19 2007-03-01 2007-08-29 2007-10-10 2007-12-15 2008-02-01 2008-09-01# Driver to use for vendor data (string value)#vendordata_driver=nova.api.metadata.vendordata_json.JsonFileVendorData## Options defined in nova.api.metadata.vendordata_json## File to load JSON formatted vendor data from (string value)#vendordata_jsonfile_path=<None>## Options defined in nova.api.openstack.common## The maximum number of items returned in a single response# from a collection resource (integer value)#osapi_max_limit=1000# Base URL that will be presented to users in links to the# OpenStack Compute API (string value)#osapi_compute_link_prefix=<None># Base URL that will be presented to users in links to glance# resources (string value)#osapi_glance_link_prefix=<None>## Options defined in nova.api.openstack.compute## Permit instance snapshot operations. (boolean value)#allow_instance_snapshots=true## Options defined in nova.api.openstack.compute.contrib## Specify list of extensions to load when using# osapi_compute_extension option with# nova.api.openstack.compute.contrib.select_extensions (list# value)#osapi_compute_ext_list=## Options defined in nova.api.openstack.compute.contrib.fping## Full path to fping. (string value)#fping_path=/usr/sbin/fping## Options defined in nova.api.openstack.compute.contrib.os_tenant_networks## Enables or disables quota checking for tenant networks# (boolean value)#enable_network_quota=false# Control for checking for default networks (string value)#use_neutron_default_nets=False# Default tenant id when creating neutron networks (string# value)#neutron_default_tenant_id=default## Options defined in nova.api.openstack.compute.extensions## osapi compute extension to load (multi valued)#osapi_compute_extension=nova.api.openstack.compute.contrib.standard_extensions## Options defined in nova.api.openstack.compute.plugins.v3.hide_server_addresses## List of instance states that should hide network info (list# value)#osapi_hide_server_address_states=building## Options defined in nova.api.openstack.compute.servers## Enables returning of the instance password by the relevant# server API calls such as create, rebuild or rescue, If the# hypervisor does not support password injection then the# password returned will not be correct (boolean value)#enable_instance_password=true## Options defined in nova.api.sizelimit## The maximum body size per each osapi request(bytes) (integer# value)#osapi_max_request_body_size=114688## Options defined in nova.cert.rpcapi## The topic cert nodes listen on (string value)#cert_topic=cert## Options defined in nova.cloudpipe.pipelib## Image ID used when starting up a cloudpipe vpn server# (string value)#vpn_image_id=0# Flavor for vpn instances (string value)#vpn_flavor=m1.tiny# Template for cloudpipe instance boot script (string value)#boot_script_template=$pybasedir/nova/cloudpipe/bootscript.template# Network to push into openvpn config (string value)#dmz_net=10.0.0.0# Netmask to push into openvpn config (string value)#dmz_mask=255.255.255.0# Suffix to add to project name for vpn key and secgroups# (string value)#vpn_key_suffix=-vpn## Options defined in nova.cmd.novnc## Record sessions to FILE.[session_number] (boolean value)#record=false# Become a daemon (background process) (boolean value)#daemon=false# Disallow non-encrypted connections (boolean value)#ssl_only=false# Source is ipv6 (boolean value)#source_is_ipv6=false# SSL certificate file (string value)#cert=self.pem# SSL key file (if separate from cert) (string value)#key=<None># Run webserver on same port. Serve files from DIR. (string# value)#web=/usr/share/spice-html5## Options defined in nova.cmd.novncproxy## Host on which to listen for incoming requests (string value)#novncproxy_host=0.0.0.0# Port on which to listen for incoming requests (integer# value)#novncproxy_port=6080## Options defined in nova.compute.api## Allow destination machine to match source for resize. Useful# when testing in single-host environments. (boolean value)#allow_resize_to_same_host=false# Allow migrate machine to the same host. Useful when testing# in single-host environments. (boolean value)#allow_migrate_to_same_host=false# Availability zone to use when user doesnt specify one# (string value)#default_schedule_zone=<None># These are image properties which a snapshot should not# inherit from an instance (list value)#non_inheritable_image_properties=cache_in_nova,bittorrent# Kernel image that indicates not to use a kernel, but to use# a raw disk image instead (string value)#null_kernel=nokernel# When creating multiple instances with a single request using# the os-multiple-create API extension, this template will be# used to build the display name for each instance. The# benefit is that the instances end up with different# hostnames. To restore legacy behavior of every instance# having the same name, set this option to "%(name)s".  Valid# keys for the template are: name, uuid, count. (string value)#multi_instance_display_name_template=%(name)s-%(uuid)s# Maximum number of devices that will result in a local image# being created on the hypervisor node. Setting this to 0# means nova will allow only boot from volume. A negative# number means unlimited. (integer value)#max_local_block_devices=3## Options defined in nova.compute.flavors## Default flavor to use for the EC2 API only. The Nova API# does not support a default flavor. (string value)#default_flavor=m1.small## Options defined in nova.compute.manager## Console proxy host to use to connect to instances on this# host. (string value)#console_host=nova# Name of network to use to set access IPs for instances# (string value)#default_access_ip_network_name=<None># Whether to batch up the application of IPTables rules during# a host restart and apply all at the end of the init phase# (boolean value)#defer_iptables_apply=false# Where instances are stored on disk (string value)#instances_path=$state_path/instances# Generate periodic compute.instance.exists notifications# (boolean value)#instance_usage_audit=false# Number of 1 second retries needed in live_migration (integer# value)#live_migration_retry_count=30# Whether to start guests that were running before the host# rebooted (boolean value)#resume_guests_state_on_host_boot=false# Number of times to retry network allocation on failures# (integer value)#network_allocate_retries=0# Number of times to retry block device allocation on failures# (integer value)#block_device_allocate_retries=60# The number of times to attempt to reap an instances files.# (integer value)#maximum_instance_delete_attempts=5# Interval to pull network bandwidth usage info. Not supported# on all hypervisors. Set to -1 to disable. Setting this to 0# will disable, but this will change in the K release to mean# "run at the default rate". (integer value)#bandwidth_poll_interval=600# Interval to sync power states between the database and the# hypervisor. Set to -1 to disable. Setting this to 0 will# disable, but this will change in Juno to mean "run at the# default rate". (integer value)#sync_power_state_interval=600# Number of seconds between instance info_cache self healing# updates (integer value)#heal_instance_info_cache_interval=60# Interval in seconds for reclaiming deleted instances# (integer value)#reclaim_instance_interval=0# Interval in seconds for gathering volume usages (integer# value)#volume_usage_poll_interval=0# Interval in seconds for polling shelved instances to# offload. Set to -1 to disable.Setting this to 0 will# disable, but this will change in Juno to mean "run at the# default rate". (integer value)#shelved_poll_interval=3600# Time in seconds before a shelved instance is eligible for# removing from a host.  -1 never offload, 0 offload when# shelved (integer value)#shelved_offload_time=0# Interval in seconds for retrying failed instance file# deletes (integer value)#instance_delete_interval=300# Waiting time interval (seconds) between block device# allocation retries on failures (integer value)#block_device_allocate_retries_interval=3# Action to take if a running deleted instance is# detected.Valid options are noop, log, shutdown, or# reap. Set to noop to take no action. (string value)#running_deleted_instance_action=reap# Number of seconds to wait between runs of the cleanup task.# (integer value)#running_deleted_instance_poll_interval=1800# Number of seconds after being deleted when a running# instance should be considered eligible for cleanup. (integer# value)#running_deleted_instance_timeout=0# Automatically hard reboot an instance if it has been stuck# in a rebooting state longer than N seconds. Set to 0 to# disable. (integer value)#reboot_timeout=0# Amount of time in seconds an instance can be in BUILD before# going into ERROR status.Set to 0 to disable. (integer value)#instance_build_timeout=0# Automatically unrescue an instance after N seconds. Set to 0# to disable. (integer value)#rescue_timeout=0# Automatically confirm resizes after N seconds. Set to 0 to# disable. (integer value)#resize_confirm_window=0# Total amount of time to wait in seconds for an instance to# perform a clean shutdown. (integer value)#shutdown_timeout=60## Options defined in nova.compute.monitors## Monitor classes available to the compute which may be# specified more than once. (multi valued)#compute_available_monitors=nova.compute.monitors.all_monitors# A list of monitors that can be used for getting compute# metrics. (list value)#compute_monitors=## Options defined in nova.compute.resource_tracker## Amount of disk in MB to reserve for the host (integer value)#reserved_host_disk_mb=0# Amount of memory in MB to reserve for the host (integer# value)#reserved_host_memory_mb=512# Class that will manage stats for the local compute host# (string value)#compute_stats_class=nova.compute.stats.Stats# The names of the extra resources to track. (list value)#compute_resources=vcpu## Options defined in nova.compute.rpcapi## The topic compute nodes listen on (string value)#compute_topic=compute## Options defined in nova.conductor.tasks.live_migrate## Number of times to retry live-migration before failing. If# == -1, try until out of hosts. If == 0, only try once, no# retries. (integer value)#migrate_max_retries=-1## Options defined in nova.console.manager## Driver to use for the console proxy (string value)#console_driver=nova.console.xvp.XVPConsoleProxy# Stub calls to compute worker for tests (boolean value)#stub_compute=false# Publicly visible name for this console host (string value)#console_public_hostname=nova## Options defined in nova.console.rpcapi## The topic console proxy nodes listen on (string value)#console_topic=console## Options defined in nova.console.vmrc## DEPRECATED. Port for VMware VMRC connections (integer value)#console_vmrc_port=443# DEPRECATED. Number of retries for retrieving VMRC# information (integer value)#console_vmrc_error_retries=10## Options defined in nova.console.xvp## XVP conf template (string value)#console_xvp_conf_template=$pybasedir/nova/console/xvp.conf.template# Generated XVP conf file (string value)#console_xvp_conf=/etc/xvp.conf# XVP master process pid file (string value)#console_xvp_pid=/var/run/xvp.pid# XVP log file (string value)#console_xvp_log=/var/log/xvp.log# Port for XVP to multiplex VNC connections on (integer value)#console_xvp_multiplex_port=5900## Options defined in nova.consoleauth## The topic console auth proxy nodes listen on (string value)#consoleauth_topic=consoleauth## Options defined in nova.consoleauth.manager## How many seconds before deleting tokens (integer value)#console_token_ttl=600## Options defined in nova.db.api## Services to be added to the available pool on create# (boolean value)#enable_new_services=true# Template string to be used to generate instance names# (string value)#instance_name_template=instance-%08x# Template string to be used to generate snapshot names# (string value)#snapshot_name_template=snapshot-%s## Options defined in nova.db.base## The driver to use for database access (string value)#db_driver=nova.db## Options defined in nova.db.sqlalchemy.api## When set, compute API will consider duplicate hostnames# invalid within the specified scope, regardless of case.# Should be empty, "project" or "global". (string value)#osapi_compute_unique_server_name_scope=## Options defined in nova.image.s3## Parent directory for tempdir used for image decryption# (string value)#image_decryption_dir=/tmp# Hostname or IP for OpenStack to use when accessing the S3# api (string value)#s3_host=$my_ip# Port used when accessing the S3 api (integer value)#s3_port=3333# Access key to use for S3 server for images (string value)#s3_access_key=notchecked# Secret key to use for S3 server for images (string value)#s3_secret_key=notchecked# Whether to use SSL when talking to S3 (boolean value)#s3_use_ssl=false# Whether to affix the tenant id to the access key when# downloading from S3 (boolean value)#s3_affix_tenant=false## Options defined in nova.ipv6.api## Backend to use for IPv6 generation (string value)#ipv6_backend=rfc2462## Options defined in nova.network## The full class name of the network API class to use (string# value)#network_api_class=nova.network.api.API## Options defined in nova.network.driver## Driver to use for network creation (string value)#network_driver=nova.network.linux_net## Options defined in nova.network.floating_ips## Default pool for floating IPs (string value)#default_floating_pool=nova# Autoassigning floating IP to VM (boolean value)#auto_assign_floating_ip=false# Full class name for the DNS Manager for floating IPs (string# value)#floating_ip_dns_manager=nova.network.noop_dns_driver.NoopDNSDriver# Full class name for the DNS Manager for instance IPs (string# value)#instance_dns_manager=nova.network.noop_dns_driver.NoopDNSDriver# Full class name for the DNS Zone for instance IPs (string# value)#instance_dns_domain=## Options defined in nova.network.ldapdns## URL for LDAP server which will store DNS entries (string# value)#ldap_dns_url=ldap://ldap.example.com:389# User for LDAP DNS (string value)#ldap_dns_user=uid=admin,ou=people,dc=example,dc=org# Password for LDAP DNS (string value)#ldap_dns_password=password# Hostmaster for LDAP DNS driver Statement of Authority# (string value)#ldap_dns_soa_hostmaster=hostmaster@example.org# DNS Servers for LDAP DNS driver (multi valued)#ldap_dns_servers=dns.example.org# Base DN for DNS entries in LDAP (string value)#ldap_dns_base_dn=ou=hosts,dc=example,dc=org# Refresh interval (in seconds) for LDAP DNS driver Statement# of Authority (string value)#ldap_dns_soa_refresh=1800# Retry interval (in seconds) for LDAP DNS driver Statement of# Authority (string value)#ldap_dns_soa_retry=3600# Expiry interval (in seconds) for LDAP DNS driver Statement# of Authority (string value)#ldap_dns_soa_expiry=86400# Minimum interval (in seconds) for LDAP DNS driver Statement# of Authority (string value)#ldap_dns_soa_minimum=7200## Options defined in nova.network.linux_net## Location of flagfiles for dhcpbridge (multi valued)#dhcpbridge_flagfile=/etc/nova/nova.conf# Location to keep network config files (string value)#networks_path=$state_path/networks# Interface for public IP addresses (string value)#public_interface=eth0# Location of nova-dhcpbridge (string value)#dhcpbridge=/usr/bin/nova-dhcpbridge# Public IP of network host (string value)#routing_source_ip=$my_ip# Lifetime of a DHCP lease in seconds (integer value)#dhcp_lease_time=86400# If set, uses specific DNS server for dnsmasq. Can be# specified multiple times. (multi valued)#dns_server=# If set, uses the dns1 and dns2 from the network ref. as dns# servers. (boolean value)#use_network_dns_servers=false# A list of dmz range that should be accepted (list value)#dmz_cidr=# Traffic to this range will always be snatted to the fallback# ip, even if it would normally be bridged out of the node.# Can be specified multiple times. (multi valued)#force_snat_range=# Override the default dnsmasq settings with this file (string# value)#dnsmasq_config_file=# Driver used to create ethernet devices. (string value)#linuxnet_interface_driver=nova.network.linux_net.LinuxBridgeInterfaceDriver# Name of Open vSwitch bridge used with linuxnet (string# value)#linuxnet_ovs_integration_bridge=br-int# Send gratuitous ARPs for HA setup (boolean value)#send_arp_for_ha=false# Send this many gratuitous ARPs for HA setup (integer value)#send_arp_for_ha_count=3# Use single default gateway. Only first nic of vm will get# default gateway from dhcp server (boolean value)#use_single_default_gateway=false# An interface that bridges can forward to. If this is set to# all then all traffic will be forwarded. Can be specified# multiple times. (multi valued)#forward_bridge_interface=all# The IP address for the metadata API server (string value)#metadata_host=$my_ip# The port for the metadata API port (integer value)#metadata_port=8775# Regular expression to match iptables rule that should always# be on the top. (string value)#iptables_top_regex=# Regular expression to match iptables rule that should always# be on the bottom. (string value)#iptables_bottom_regex=# The table that iptables to jump to when a packet is to be# dropped. (string value)#iptables_drop_action=DROP# Amount of time, in seconds, that ovs_vsctl should wait for a# response from the database. 0 is to wait forever. (integer# value)#ovs_vsctl_timeout=120# If passed, use fake network devices and addresses (boolean# value)#fake_network=false## Options defined in nova.network.manager## Bridge for simple network instances (string value)#flat_network_bridge=<None># DNS server for simple network (string value)#flat_network_dns=8.8.4.4# Whether to attempt to inject network setup into guest# (boolean value)#flat_injected=false# FlatDhcp will bridge into this interface if set (string# value)#flat_interface=<None># First VLAN for private networks (integer value)#vlan_start=100# VLANs will bridge into this interface if set (string value)#vlan_interface=<None># Number of networks to support (integer value)#num_networks=1# Public IP for the cloudpipe VPN servers (string value)#vpn_ip=$my_ip# First Vpn port for private networks (integer value)#vpn_start=1000# Number of addresses in each private subnet (integer value)#network_size=256# Fixed IPv6 address block (string value)#fixed_range_v6=fd00::/48# Default IPv4 gateway (string value)#gateway=<None># Default IPv6 gateway (string value)#gateway_v6=<None># Number of addresses reserved for vpn clients (integer value)#cnt_vpn_clients=0# Seconds after which a deallocated IP is disassociated# (integer value)#fixed_ip_disassociate_timeout=600# Number of attempts to create unique mac address (integer# value)#create_unique_mac_address_attempts=5# If True, skip using the queue and make local calls (boolean# value)#fake_call=false# If True, unused gateway devices (VLAN and bridge) are# deleted in VLAN network mode with multi hosted networks# (boolean value)#teardown_unused_network_gateway=false# If True, send a dhcp release on instance termination# (boolean value)#force_dhcp_release=True# If True, when a DNS entry must be updated, it sends a fanout# cast to all network hosts to update their DNS entries in# multi host mode (boolean value)#update_dns_entries=false# Number of seconds to wait between runs of updates to DNS# entries. (integer value)#dns_update_periodic_interval=-1# Domain to use for building the hostnames (string value)#dhcp_domain=novalocal# Indicates underlying L3 management library (string value)#l3_lib=nova.network.l3.LinuxNetL3## Options defined in nova.network.rpcapi## The topic network nodes listen on (string value)#network_topic=network# Default value for multi_host in networks. Also, if set, some# rpc network calls will be sent directly to host. (boolean# value)#multi_host=false## Options defined in nova.network.security_group.openstack_driver## The full class name of the security API class (string value)#security_group_api=nova## Options defined in nova.objects.network## DEPRECATED: THIS VALUE SHOULD BE SET WHEN CREATING THE# NETWORK. If True in multi_host mode, all compute hosts share# the same dhcp address. The same IP address used for DHCP# will be added on each nova-network node which is only# visible to the vms on the same host. (boolean value)#share_dhcp_address=false# DEPRECATED: THIS VALUE SHOULD BE SET WHEN CREATING THE# NETWORK. MTU setting for network interface. (integer value)#network_device_mtu=<None>## Options defined in nova.objectstore.s3server## Path to S3 buckets (string value)#buckets_path=$state_path/buckets# IP address for S3 API to listen (string value)#s3_listen=0.0.0.0# Port for S3 API to listen (integer value)#s3_listen_port=3333## Options defined in nova.openstack.common.eventlet_backdoor## Enable eventlet backdoor.  Acceptable values are 0, <port>,# and <start>:<end>, where 0 results in listening on a random# tcp port number; <port> results in listening on the# specified port number (and not enabling backdoor if that# port is in use); and <start>:<end> results in listening on# the smallest unused port number within the specified range# of port numbers.  The chosen port is displayed in the# services log file. (string value)#backdoor_port=<None>## Options defined in nova.openstack.common.lockutils## Enables or disables inter-process locks. (boolean value)#disable_process_locking=false# Directory to use for lock files. (string value)#lock_path=/var/lib/nova/tmp## Options defined in nova.openstack.common.log## Print debugging output (set logging level to DEBUG instead# of default WARNING level). (boolean value)#debug=false# Print more verbose output (set logging level to INFO instead# of default WARNING level). (boolean value)#verbose=false# Log output to standard error. (boolean value)#use_stderr=False# Format string to use for log messages with context. (string# value)#logging_context_format_string=%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s# Format string to use for log messages without context.# (string value)#logging_default_format_string=%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s# Data to append to log format when level is DEBUG. (string# value)#logging_debug_format_suffix=%(funcName)s %(pathname)s:%(lineno)d# Prefix each line of exception output with this format.# (string value)#logging_exception_prefix=%(asctime)s.%(msecs)03d %(process)d TRACE %(name)s %(instance)s# List of logger=LEVEL pairs. (list value)#default_log_levels=amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN# Enables or disables publication of error events. (boolean# value)#publish_errors=false# Enables or disables fatal status of deprecations. (boolean# value)#fatal_deprecations=false# The format for an instance that is passed with the log# message. (string value)#instance_format="[instance: %(uuid)s] "# The format for an instance UUID that is passed with the log# message. (string value)#instance_uuid_format="[instance: %(uuid)s] "# The name of a logging configuration file. This file is# appended to any existing logging configuration files. For# details about logging configuration files, see the Python# logging module documentation. (string value)# Deprecated group;name - DEFAULT;log_config#log_config_append=<None># DEPRECATED. A logging.Formatter log message format string# which may use any of the available logging.LogRecord# attributes. This option is deprecated.  Please use# logging_context_format_string and# logging_default_format_string instead. (string value)#log_format=<None># Format string for %%(asctime)s in log records. Default:# %(default)s . (string value)#log_date_format=%Y-%m-%d %H:%M:%S# (Optional) Name of log file to output to. If no default is# set, logging will go to stdout. (string value)# Deprecated group;name - DEFAULT;logfile#log_file=<None># (Optional) The base directory used for relative --log-file# paths. (string value)# Deprecated group;name - DEFAULT;logdir#log_dir=/var/log/nova# Use syslog for logging. Existing syslog format is DEPRECATED# during I, and will change in J to honor RFC5424. (boolean# value)#use_syslog=false# (Optional) Enables or disables syslog rfc5424 format for# logging. If enabled, prefixes the MSG part of the syslog# message with APP-NAME (RFC5424). The format without the APP-# NAME is deprecated in I, and will be removed in J. (boolean# value)#use_syslog_rfc_format=false# Syslog facility to receive log lines. (string value)#syslog_log_facility=LOG_USER## Options defined in nova.openstack.common.memorycache## Memcached servers or None for in process cache. (list value)#memcached_servers=<None>## Options defined in nova.openstack.common.periodic_task## Some periodic tasks can be run in a separate process. Should# we run them here? (boolean value)#run_external_periodic_tasks=true## Options defined in nova.openstack.common.policy## The JSON file that defines policies. (string value)#policy_file=policy.json# Default rule. Enforced when a requested rule is not found.# (string value)#policy_default_rule=default## Options defined in nova.pci.pci_request## An alias for a PCI passthrough device requirement. This# allows users to specify the alias in the extra_spec for a# flavor, without needing to repeat all the PCI property# requirements. For example: pci_alias = { "name":# "QuicAssist",   "product_id": "0443",   "vendor_id": "8086",# "device_type": "ACCEL" } defines an alias for the Intel# QuickAssist card. (multi valued) (multi valued)#pci_alias=## Options defined in nova.pci.pci_whitelist## White list of PCI devices available to VMs. For example:# pci_passthrough_whitelist =  [{"vendor_id": "8086",# "product_id": "0443"}] (multi valued)#pci_passthrough_whitelist=## Options defined in nova.scheduler.driver## The scheduler host manager class to use (string value)#scheduler_host_manager=nova.scheduler.host_manager.HostManager## Options defined in nova.scheduler.filter_scheduler## New instances will be scheduled on a host chosen randomly# from a subset of the N best hosts. This property defines the# subset size that a host is chosen from. A value of 1 chooses# the first host returned by the weighing functions. This# value must be at least 1. Any value less than 1 will be# ignored, and 1 will be used instead (integer value)#scheduler_host_subset_size=1## Options defined in nova.scheduler.filters.aggregate_image_properties_isolation## Force the filter to consider only keys matching the given# namespace. (string value)#aggregate_image_properties_isolation_namespace=<None># The separator used between the namespace and keys (string# value)#aggregate_image_properties_isolation_separator=.## Options defined in nova.scheduler.filters.core_filter## Virtual CPU to physical CPU allocation ratio which affects# all CPU filters. This configuration specifies a global ratio# for CoreFilter. For AggregateCoreFilter, it will fall back# to this configuration value if no per-aggregate setting# found. (floating point value)#cpu_allocation_ratio=16.0## Options defined in nova.scheduler.filters.disk_filter## Virtual disk to physical disk allocation ratio (floating# point value)#disk_allocation_ratio=1.0## Options defined in nova.scheduler.filters.io_ops_filter## Tells filters to ignore hosts that have this many or more# instances currently in build, resize, snapshot, migrate,# rescue or unshelve task states (integer value)#max_io_ops_per_host=8## Options defined in nova.scheduler.filters.isolated_hosts_filter## Images to run on isolated host (list value)#isolated_images=# Host reserved for specific images (list value)#isolated_hosts=# Whether to force isolated hosts to run only isolated images# (boolean value)#restrict_isolated_hosts_to_isolated_images=true## Options defined in nova.scheduler.filters.num_instances_filter## Ignore hosts that have too many instances (integer value)#max_instances_per_host=50## Options defined in nova.scheduler.filters.ram_filter## Virtual ram to physical ram allocation ratio which affects# all ram filters. This configuration specifies a global ratio# for RamFilter. For AggregateRamFilter, it will fall back to# this configuration value if no per-aggregate setting found.# (floating point value)#ram_allocation_ratio=1.5## Options defined in nova.scheduler.host_manager## Filter classes available to the scheduler which may be# specified more than once.  An entry of# "nova.scheduler.filters.standard_filters" maps to all# filters included with nova. (multi valued)#scheduler_available_filters=nova.scheduler.filters.all_filters# Which filter class names to use for filtering hosts when not# specified in the request. (list value)#scheduler_default_filters=RetryFilter,AvailabilityZoneFilter,RamFilter,ComputeFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,ServerGroupAntiAffinityFilter,ServerGroupAffinityFilter# Which weight class names to use for weighing hosts (list# value)#scheduler_weight_classes=nova.scheduler.weights.all_weighers## Options defined in nova.scheduler.ironic_host_manager## Which filter class names to use for filtering baremetal# hosts when not specified in the request. (list value)#baremetal_scheduler_default_filters=RetryFilter,AvailabilityZoneFilter,ComputeFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,ExactRamFilter,ExactDiskFilter,ExactCoreFilter# Flag to decide whether to use# baremetal_scheduler_default_filters or not. (boolean value)#scheduler_use_baremetal_filters=false## Options defined in nova.scheduler.manager## Default driver to use for the scheduler (string value)#scheduler_driver=nova.scheduler.filter_scheduler.FilterScheduler# How often (in seconds) to run periodic tasks in the# scheduler driver of your choice. Please note this is likely# to interact with the value of service_down_time, but exactly# how they interact will depend on your choice of scheduler# driver. (integer value)#scheduler_driver_task_period=60## Options defined in nova.scheduler.rpcapi## The topic scheduler nodes listen on (string value)#scheduler_topic=scheduler## Options defined in nova.scheduler.scheduler_options## Absolute path to scheduler configuration JSON file. (string# value)#scheduler_json_config_location=## Options defined in nova.scheduler.utils## Maximum number of attempts to schedule an instance (integer# value)#scheduler_max_attempts=3## Options defined in nova.scheduler.weights.ram## Multiplier used for weighing ram.  Negative numbers mean to# stack vs spread. (floating point value)#ram_weight_multiplier=1.0## Options defined in nova.servicegroup.api## The driver for servicegroup service (valid options are: db,# zk, mc) (string value)#servicegroup_driver=db## Options defined in nova.virt.configdrive## Config drive format. One of iso9660 (default) or vfat# (string value)#config_drive_format=iso9660# DEPRECATED (not needed any more):  Where to put temporary# files associated with config drive creation (string value)#config_drive_tempdir=<None># Set to force injection to take place on a config drive (if# set, valid options are: always) (string value)#force_config_drive=<None># Name and optionally path of the tool used for ISO image# creation (string value)#mkisofs_cmd=genisoimage## Options defined in nova.virt.disk.api## Name of the mkfs commands for ephemeral device. The format# is <os_type>=<mkfs command> (multi valued)#virt_mkfs=# Attempt to resize the filesystem by accessing the image over# a block device. This is done by the host and may not be# necessary if the image contains a recent version of cloud-# init. Possible mechanisms require the nbd driver (for qcow# and raw), or loop (for raw). (boolean value)#resize_fs_using_block_device=false## Options defined in nova.virt.disk.mount.nbd## Amount of time, in seconds, to wait for NBD device start up.# (integer value)#timeout_nbd=10## Options defined in nova.virt.driver## Driver to use for controlling virtualization. Options# include: libvirt.LibvirtDriver, xenapi.XenAPIDriver,# fake.FakeDriver, baremetal.BareMetalDriver,# vmwareapi.VMwareVCDriver, hyperv.HyperVDriver (string value)#compute_driver=libvirt.LibvirtDriver# The default format an ephemeral_volume will be formatted# with on creation. (string value)#default_ephemeral_format=<None># VM image preallocation mode: "none" => no storage# provisioning is done up front, "space" => storage is fully# allocated at instance start (string value)#preallocate_images=none# Whether to use cow images (boolean value)#use_cow_images=true# Fail instance boot if vif plugging fails (boolean value)#vif_plugging_is_fatal=true# Number of seconds to wait for neutron vif plugging events to# arrive before continuing or failing (see# vif_plugging_is_fatal). If this is set to zero and# vif_plugging_is_fatal is False, events should not be# expected to arrive at all. (integer value)#vif_plugging_timeout=300## Options defined in nova.virt.firewall## Firewall driver (defaults to hypervisor specific iptables# driver) (string value)#firewall_driver=nova.virt.libvirt.firewall.IptablesFirewallDriver# Whether to allow network traffic from same network (boolean# value)#allow_same_net_traffic=true## Options defined in nova.virt.hardware## Defines which pcpus that instance vcpus can use. For# example, "4-12,^8,15" (string value)#vcpu_pin_set=<None>## Options defined in nova.virt.imagecache## Number of seconds to wait between runs of the image cache# manager. Set to -1 to disable. Setting this to 0 will# disable, but this will change in the K release to mean "run# at the default rate". (integer value)#image_cache_manager_interval=2400# Where cached images are stored under $instances_path. This# is NOT the full path - just a folder name. For per-compute-# host cached images, set to _base_$my_ip (string value)#image_cache_subdirectory_name=_base# Should unused base images be removed? (boolean value)#remove_unused_base_images=true# Unused unresized base images younger than this will not be# removed (integer value)#remove_unused_original_minimum_age_seconds=86400## Options defined in nova.virt.images## Force backing images to raw format (boolean value)#force_raw_images=true## Options defined in nova.virt.netutils## Template file for injected network (string value)#injected_network_template=/usr/share/nova/interfaces.template## Options defined in nova.vnc## Location of VNC console proxy, in the form# "http://127.0.0.1:6080/vnc_auto.html" (string value)#novncproxy_base_url=http://127.0.0.1:6080/vnc_auto.html# Location of nova xvp VNC console proxy, in the form# "http://127.0.0.1:6081/console" (string value)#xvpvncproxy_base_url=http://127.0.0.1:6081/console# IP address on which instance vncservers should listen# (string value)#vncserver_listen=127.0.0.1# The address to which proxy clients (like nova-xvpvncproxy)# should connect (string value)#vncserver_proxyclient_address=127.0.0.1# Enable VNC related features (boolean value)#vnc_enabled=true# Keymap for VNC (string value)#vnc_keymap=en-us## Options defined in nova.vnc.xvp_proxy## Port that the XCP VNC proxy should bind to (integer value)#xvpvncproxy_port=6081# Address that the XCP VNC proxy should bind to (string value)#xvpvncproxy_host=0.0.0.0## Options defined in nova.volume## The full class name of the volume API class to use (string# value)#volume_api_class=nova.volume.cinder.API[baremetal]## Options defined in nova.virt.baremetal.db.api## The backend to use for bare-metal database (string value)#db_backend=sqlalchemy## Options defined in nova.virt.baremetal.db.sqlalchemy.session## The SQLAlchemy connection string used to connect to the# bare-metal database (string value)#sql_connection=sqlite:///$state_path/baremetal_nova.sqlite## Options defined in nova.virt.baremetal.driver## Baremetal VIF driver. (string value)#vif_driver=nova.virt.baremetal.vif_driver.BareMetalVIFDriver# Baremetal volume driver. (string value)#volume_driver=nova.virt.baremetal.volume_driver.LibvirtVolumeDriver# A list of additional capabilities corresponding to# flavor_extra_specs for this compute host to advertise. Valid# entries are name=value, pairs For example, "key1:val1,# key2:val2" (list value)#flavor_extra_specs=# Baremetal driver back-end (pxe or tilera) (string value)#driver=nova.virt.baremetal.pxe.PXE# Baremetal power management method (string value)#power_manager=nova.virt.baremetal.ipmi.IPMI# Baremetal compute nodes tftp root path (string value)#tftp_root=/tftpboot## Options defined in nova.virt.baremetal.ipmi## Path to baremetal terminal program (string value)#terminal=shellinaboxd# Path to baremetal terminal SSL cert(PEM) (string value)#terminal_cert_dir=<None># Path to directory stores pidfiles of baremetal_terminal# (string value)#terminal_pid_dir=$state_path/baremetal/console# Maximal number of retries for IPMI operations (integer# value)#ipmi_power_retry=10## Options defined in nova.virt.baremetal.pxe## Default kernel image ID used in deployment phase (string# value)#deploy_kernel=<None># Default ramdisk image ID used in deployment phase (string# value)#deploy_ramdisk=<None># Template file for injected network config (string value)#net_config_template=$pybasedir/nova/virt/baremetal/net-dhcp.ubuntu.template# Additional append parameters for baremetal PXE boot (string# value)#pxe_append_params=nofb nomodeset vga=normal# Template file for PXE configuration (string value)#pxe_config_template=$pybasedir/nova/virt/baremetal/pxe_config.template# If True, enable file injection for network info, files and# admin password (boolean value)#use_file_injection=false# Timeout for PXE deployments. Default: 0 (unlimited) (integer# value)#pxe_deploy_timeout=0# If set, pass the network configuration details to the# initramfs via cmdline. (boolean value)#pxe_network_config=false# This gets passed to Neutron as the bootfile dhcp parameter.# (string value)#pxe_bootfile_name=pxelinux.0## Options defined in nova.virt.baremetal.tilera_pdu## IP address of tilera pdu (string value)#tile_pdu_ip=10.0.100.1# Management script for tilera pdu (string value)#tile_pdu_mgr=/tftpboot/pdu_mgr# Power status of tilera PDU is OFF (integer value)#tile_pdu_off=2# Power status of tilera PDU is ON (integer value)#tile_pdu_on=1# Power status of tilera PDU (integer value)#tile_pdu_status=9# Wait time in seconds until check the result after tilera# power operations (integer value)#tile_power_wait=9## Options defined in nova.virt.baremetal.virtual_power_driver## IP or name to virtual power host (string value)#virtual_power_ssh_host=# Port to use for ssh to virtual power host (integer value)#virtual_power_ssh_port=22# Base command to use for virtual power(vbox, virsh) (string# value)#virtual_power_type=virsh# User to execute virtual power commands as (string value)#virtual_power_host_user=# Password for virtual power host_user (string value)#virtual_power_host_pass=# The ssh key for virtual power host_user (string value)#virtual_power_host_key=<None>## Options defined in nova.virt.baremetal.volume_driver## Do not set this out of dev/test environments. If a node does# not have a fixed PXE IP address, volumes are exported with# globally opened ACL (boolean value)#use_unsafe_iscsi=false# The iSCSI IQN prefix used in baremetal volume connections.# (string value)#iscsi_iqn_prefix=iqn.2010-10.org.openstack.baremetal[cells]## Options defined in nova.cells.manager## Cells communication driver to use (string value)#driver=nova.cells.rpc_driver.CellsRPCDriver# Number of seconds after an instance was updated or deleted# to continue to update cells (integer value)#instance_updated_at_threshold=3600# Number of instances to update per periodic task run (integer# value)#instance_update_num_instances=1## Options defined in nova.cells.messaging## Maximum number of hops for cells routing. (integer value)#max_hop_count=10# Cells scheduler to use (string value)#scheduler=nova.cells.scheduler.CellsScheduler## Options defined in nova.cells.opts## Enable cell functionality (boolean value)#enable=false# The topic cells nodes listen on (string value)#topic=cells# Manager for cells (string value)#manager=nova.cells.manager.CellsManager# Name of this cell (string value)#name=nova# Key/Multi-value list with the capabilities of the cell (list# value)#capabilities=hypervisor=xenserver;kvm,os=linux;windows# Seconds to wait for response from a call to a cell. (integer# value)#call_timeout=60# Percentage of cell capacity to hold in reserve. Affects both# memory and disk utilization (floating point value)#reserve_percent=10.0# Type of cell: api or compute (string value)#cell_type=compute# Number of seconds after which a lack of capability and# capacity updates signals the child cell is to be treated as# a mute. (integer value)#mute_child_interval=300# Seconds between bandwidth updates for cells. (integer value)#bandwidth_update_interval=600## Options defined in nova.cells.rpc_driver## Base queue name to use when communicating between cells.# Various topics by message type will be appended to this.# (string value)#rpc_driver_queue_base=cells.intercell## Options defined in nova.cells.scheduler## Filter classes the cells scheduler should use.  An entry of# "nova.cells.filters.all_filters" maps to all cells filters# included with nova. (list value)#scheduler_filter_classes=nova.cells.filters.all_filters# Weigher classes the cells scheduler should use.  An entry of# "nova.cells.weights.all_weighers" maps to all cell weighers# included with nova. (list value)#scheduler_weight_classes=nova.cells.weights.all_weighers# How many retries when no cells are available. (integer# value)#scheduler_retries=10# How often to retry in seconds when no cells are available.# (integer value)#scheduler_retry_delay=2## Options defined in nova.cells.state## Interval, in seconds, for getting fresh cell information# from the database. (integer value)#db_check_interval=60# Configuration file from which to read cells configuration.# If given, overrides reading cells from the database. (string# value)#cells_config=<None>## Options defined in nova.cells.weights.mute_child## Multiplier used to weigh mute children. (The value should be# negative.) (floating point value)#mute_weight_multiplier=-10.0# Weight value assigned to mute children. (The value should be# positive.) (floating point value)#mute_weight_value=1000.0## Options defined in nova.cells.weights.ram_by_instance_type## Multiplier used for weighing ram.  Negative numbers mean to# stack vs spread. (floating point value)#ram_weight_multiplier=10.0## Options defined in nova.cells.weights.weight_offset## Multiplier used to weigh offset weigher. (floating point# value)#offset_weight_multiplier=1.0[cinder]## Options defined in nova.volume.cinder## Info to match when looking for cinder in the service# catalog. Format is: separated values of the form:# <service_type>:<service_name>:<endpoint_type> (string value)# Deprecated group;name - DEFAULT;cinder_catalog_info#catalog_info=volume:cinder:publicURL# Override service catalog lookup with template for cinder# endpoint e.g. http://localhost:8776/v1/%(project_id)s# (string value)# Deprecated group;name - DEFAULT;cinder_endpoint_template#endpoint_template=<None># Region name of this node (string value)# Deprecated group;name - DEFAULT;os_region_name#os_region_name=<None># Location of ca certificates file to use for cinder client# requests. (string value)# Deprecated group;name - DEFAULT;cinder_ca_certificates_file#ca_certificates_file=<None># Number of cinderclient retries on failed http calls (integer# value)# Deprecated group;name - DEFAULT;cinder_http_retries#http_retries=3# HTTP inactivity timeout (in seconds) (integer value)# Deprecated group;name - DEFAULT;cinder_http_timeout#http_timeout=<None># Allow to perform insecure SSL requests to cinder (boolean# value)# Deprecated group;name - DEFAULT;cinder_api_insecure#api_insecure=false# Allow attach between instance and volume in different# availability zones. (boolean value)# Deprecated group;name - DEFAULT;cinder_cross_az_attach#cross_az_attach=true[conductor]## Options defined in nova.conductor.api## Perform nova-conductor operations locally (boolean value)#use_local=false# The topic on which conductor nodes listen (string value)#topic=conductor# Full class name for the Manager for conductor (string value)#manager=nova.conductor.manager.ConductorManager# Number of workers for OpenStack Conductor service. The# default will be the number of CPUs available. (integer# value)#workers=<None>[ephemeral_storage_encryption]## Options defined in nova.compute.api## Whether to encrypt ephemeral storage (boolean value)#enabled=false# The cipher and mode to be used to encrypt ephemeral storage.# Which ciphers are available ciphers depends on kernel# support. See /proc/crypto for the list of available options.# (string value)#cipher=aes-xts-plain64# The bit length of the encryption key to be used to encrypt# ephemeral storage (in XTS mode only half of the bits are# used for encryption key) (integer value)#key_size=512[glance]## Options defined in nova.image.glance## Default glance hostname or IP address (string value)# Deprecated group;name - DEFAULT;glance_host#host=$my_ip# Default glance port (integer value)# Deprecated group;name - DEFAULT;glance_port#port=9292# Default protocol to use when connecting to glance. Set to# https for SSL. (string value)# Deprecated group;name - DEFAULT;glance_protocol#protocol=http# A list of the glance api servers available to nova. Prefix# with https:// for ssl-based glance api servers.# ([hostname|ip]:port) (list value)# Deprecated group;name - DEFAULT;glance_api_servers#api_servers=<None># Allow to perform insecure SSL (https) requests to glance# (boolean value)# Deprecated group;name - DEFAULT;glance_api_insecure#api_insecure=false# Number of retries when downloading an image from glance# (integer value)# Deprecated group;name - DEFAULT;glance_num_retries#num_retries=0# A list of url scheme that can be downloaded directly via the# direct_url.  Currently supported schemes: [file]. (list# value)#allowed_direct_url_schemes=[hyperv]## Options defined in nova.virt.hyperv.pathutils## The name of a Windows share name mapped to the# "instances_path" dir and used by the resize feature to copy# files to the target host. If left blank, an administrative# share will be used, looking for the same "instances_path"# used locally (string value)#instances_path_share=## Options defined in nova.virt.hyperv.utilsfactory## Force V1 WMI utility classes (boolean value)#force_hyperv_utils_v1=false# Force V1 volume utility class (boolean value)#force_volumeutils_v1=false## Options defined in nova.virt.hyperv.vif## External virtual switch Name, if not provided, the first# external virtual switch is used (string value)#vswitch_name=<None>## Options defined in nova.virt.hyperv.vmops## Required for live migration among hosts with different CPU# features (boolean value)#limit_cpu_features=false# Sets the admin password in the config drive image (boolean# value)#config_drive_inject_password=false# Path of qemu-img command which is used to convert between# different image types (string value)#qemu_img_cmd=qemu-img.exe# Attaches the Config Drive image as a cdrom drive instead of# a disk drive (boolean value)#config_drive_cdrom=false# Enables metrics collections for an instance by using# Hyper-Vs metric APIs. Collected data can by retrieved by# other apps and services, e.g.: Ceilometer. Requires Hyper-V# / Windows Server 2012 and above (boolean value)#enable_instance_metrics_collection=false# Enables dynamic memory allocation (ballooning) when set to a# value greater than 1. The value expresses the ratio between# the total RAM assigned to an instance and its startup RAM# amount. For example a ratio of 2.0 for an instance with# 1024MB of RAM implies 512MB of RAM allocated at startup# (floating point value)#dynamic_memory_ratio=1.0# Number of seconds to wait for instance to shut down after# soft reboot request is made. We fall back to hard reboot if# instance does not shutdown within this window. (integer# value)#wait_soft_reboot_seconds=60## Options defined in nova.virt.hyperv.volumeops## The number of times to retry to attach a volume (integer# value)#volume_attach_retry_count=10# Interval between volume attachment attempts, in seconds# (integer value)#volume_attach_retry_interval=5# The number of times to retry checking for a disk mounted via# iSCSI. (integer value)#mounted_disk_query_retry_count=10# Interval between checks for a mounted iSCSI disk, in# seconds. (integer value)#mounted_disk_query_retry_interval=5[image_file_url]## Options defined in nova.image.download.file## List of file systems that are configured in this file in the# image_file_url:<list entry name> sections (list value)#filesystems=[ironic]## Options defined in nova.virt.ironic.driver## Version of Ironic API service endpoint. (integer value)#api_version=1# URL for Ironic API endpoint. (string value)#api_endpoint=<None># Ironic keystone admin name (string value)#admin_username=<None># Ironic keystone admin password. (string value)#admin_password=%SERVICE_PASSWORD%# Ironic keystone auth token. (string value)#admin_auth_token=<None># Keystone public API endpoint. (string value)#admin_url=<None># Log level override for ironicclient. Set this in order to# override the global "default_log_levels", "verbose", and# "debug" settings. (string value)#client_log_level=<None># Ironic keystone tenant name. (string value)#admin_tenant_name=%SERVICE_TENANT_NAME%# How many retries when a request does conflict. (integer# value)#api_max_retries=60# How often to retry in seconds when a request does conflict# (integer value)#api_retry_interval=2[keymgr]## Options defined in nova.keymgr## The full class name of the key manager API class (string# value)#api_class=nova.keymgr.conf_key_mgr.ConfKeyManager## Options defined in nova.keymgr.conf_key_mgr## Fixed key returned by key manager, specified in hex (string# value)#fixed_key=<None>[keystone_authtoken]## Options defined in keystonemiddleware.auth_token## Prefix to prepend at the beginning of the path. Deprecated,# use identity_uri. (string value)#auth_admin_prefix=# Host providing the admin Identity API endpoint. Deprecated,# use identity_uri. (string value)#auth_host=127.0.0.1# Port of the admin Identity API endpoint. Deprecated, use# identity_uri. (integer value)#auth_port=35357# Protocol of the admin Identity API endpoint (http or https).# Deprecated, use identity_uri. (string value)#auth_protocol=http# Complete public Identity API endpoint (string value)#auth_uri=<None># Complete admin Identity API endpoint. This should specify# the unversioned root endpoint e.g. https://localhost:35357/# (string value)#identity_uri=<None># API version of the admin Identity API endpoint (string# value)#auth_version=v2.0# Do not handle authorization requests within the middleware,# but delegate the authorization decision to downstream WSGI# components (boolean value)#delay_auth_decision=false# Request timeout value for communicating with Identity API# server. (boolean value)#http_connect_timeout=<None># How many times are we trying to reconnect when communicating# with Identity API Server. (integer value)#http_request_max_retries=3# This option is deprecated and may be removed in a future# release. Single shared secret with the Keystone# configuration used for bootstrapping a Keystone# installation, or otherwise bypassing the normal# authentication process. This option should not be used, use# `admin_user` and `admin_password` instead. (string value)#admin_token=<None># Keystone account username (string value)#admin_user=%SERVICE_USER%# Keystone account password (string value)#admin_password=<None># Keystone service account tenant name to validate user tokens# (string value)#admin_tenant_name=admin# Env key for the swift cache (string value)#cache=<None># Required if Keystone server requires client certificate# (string value)#certfile=<None># Required if Keystone server requires client certificate# (string value)#keyfile=<None># A PEM encoded Certificate Authority to use when verifying# HTTPs connections. Defaults to system CAs. (string value)#cafile=<None># Verify HTTPS connections. (boolean value)#insecure=false# Directory used to cache files related to PKI tokens (string# value)#signing_dir=<None># Optionally specify a list of memcached server(s) to use for# caching. If left undefined, tokens will instead be cached# in-process. (list value)# Deprecated group;name - DEFAULT;memcache_servers#memcached_servers=<None># In order to prevent excessive effort spent validating# tokens, the middleware caches previously-seen tokens for a# configurable duration (in seconds). Set to -1 to disable# caching completely. (integer value)#token_cache_time=300# Determines the frequency at which the list of revoked tokens# is retrieved from the Identity service (in seconds). A high# number of revocation events combined with a low cache# duration may significantly reduce performance. (integer# value)#revocation_cache_time=10# (optional) if defined, indicate whether token data should be# authenticated or authenticated and encrypted. Acceptable# values are MAC or ENCRYPT.  If MAC, token data is# authenticated (with HMAC) in the cache. If ENCRYPT, token# data is encrypted and authenticated in the cache. If the# value is not one of these options or empty, auth_token will# raise an exception on initialization. (string value)#memcache_security_strategy=<None># (optional, mandatory if memcache_security_strategy is# defined) this string is used for key derivation. (string# value)#memcache_secret_key=<None># (optional) number of seconds memcached server is considered# dead before it is tried again. (integer value)#memcache_pool_dead_retry=300# (optional) max total number of open connections to every# memcached server. (integer value)#memcache_pool_maxsize=10# (optional) socket timeout in seconds for communicating with# a memcache server. (integer value)#memcache_pool_socket_timeout=3# (optional) number of seconds a connection to memcached is# held unused in the pool before it is closed. (integer value)#memcache_pool_unused_timeout=60# (optional) number of seconds that an operation will wait to# get a memcache client connection from the pool. (integer# value)#memcache_pool_conn_get_timeout=10# (optional) use the advanced (eventlet safe) memcache client# pool. The advanced pool will only work under python 2.x.# (boolean value)#memcache_use_advanced_pool=false# (optional) indicate whether to set the X-Service-Catalog# header. If False, middleware will not ask for service# catalog on token validation and will not set the X-Service-# Catalog header. (boolean value)#include_service_catalog=true# Used to control the use and type of token binding. Can be# set to: "disabled" to not check token binding. "permissive"# (default) to validate binding information if the bind type# is of a form known to the server and ignore it if not.# "strict" like "permissive" but if the bind type is unknown# the token will be rejected. "required" any form of token# binding is needed to be allowed. Finally the name of a# binding method that must be present in tokens. (string# value)#enforce_token_bind=permissive# If true, the revocation list will be checked for cached# tokens. This requires that PKI tokens are configured on the# Keystone server. (boolean value)#check_revocations_for_cached=false# Hash algorithms to use for hashing PKI tokens. This may be a# single algorithm or multiple. The algorithms are those# supported by Python standard hashlib.new(). The hashes will# be tried in the order given, so put the preferred one first# for performance. The result of the first hash will be stored# in the cache. This will typically be set to multiple values# only while migrating from a less secure algorithm to a more# secure one. Once all the old tokens are expired this option# should be set to a single value for better performance.# (list value)#hash_algorithms=md5[libvirt]## Options defined in nova.virt.libvirt.driver## Rescue ami image. This will not be used if an image id is# provided by the user. (string value)#rescue_image_id=<None># Rescue aki image (string value)#rescue_kernel_id=<None># Rescue ari image (string value)#rescue_ramdisk_id=<None># Libvirt domain type (valid options are: kvm, lxc, qemu, uml,# xen) (string value)#virt_type=kvm# Override the default libvirt URI (which is dependent on# virt_type) (string value)#connection_uri=# Inject the admin password at boot time, without an agent.# (boolean value)#inject_password=false# Inject the ssh public key at boot time (boolean value)#inject_key=false# The partition to inject to : -2 => disable, -1 => inspect# (libguestfs only), 0 => not partitioned, >0 => partition# number (integer value)#inject_partition=-2# Sync virtual and real mouse cursors in Windows VMs (boolean# value)#use_usb_tablet=true# Migration target URI (any included "%s" is replaced with the# migration target hostname) (string value)#live_migration_uri=qemu+tcp://%s/system# Migration flags to be set for live migration (string value)#live_migration_flag=VIR_MIGRATE_UNDEFINE_SOURCE, VIR_MIGRATE_PEER2PEER, VIR_MIGRATE_LIVE, VIR_MIGRATE_TUNNELLED# Migration flags to be set for block migration (string value)#block_migration_flag=VIR_MIGRATE_UNDEFINE_SOURCE, VIR_MIGRATE_PEER2PEER, VIR_MIGRATE_LIVE, VIR_MIGRATE_TUNNELLED, VIR_MIGRATE_NON_SHARED_INC# Maximum bandwidth to be used during migration, in Mbps# (integer value)#live_migration_bandwidth=0# Snapshot image format (valid options are : raw, qcow2, vmdk,# vdi). Defaults to same as source image (string value)#snapshot_image_format=<None># DEPRECATED. Libvirt handlers for remote volumes. This option# is deprecated and will be removed in the Kilo release. (list# value)#volume_drivers=iscsi=nova.virt.libvirt.volume.LibvirtISCSIVolumeDriver,iser=nova.virt.libvirt.volume.LibvirtISERVolumeDriver,local=nova.virt.libvirt.volume.LibvirtVolumeDriver,fake=nova.virt.libvirt.volume.LibvirtFakeVolumeDriver,rbd=nova.virt.libvirt.volume.LibvirtNetVolumeDriver,sheepdog=nova.virt.libvirt.volume.LibvirtNetVolumeDriver,nfs=nova.virt.libvirt.volume.LibvirtNFSVolumeDriver,aoe=nova.virt.libvirt.volume.LibvirtAOEVolumeDriver,glusterfs=nova.virt.libvirt.volume.LibvirtGlusterfsVolumeDriver,fibre_channel=nova.virt.libvirt.volume.LibvirtFibreChannelVolumeDriver,scality=nova.virt.libvirt.volume.LibvirtScalityVolumeDriver# Override the default disk prefix for the devices attached to# a server, which is dependent on virt_type. (valid options# are: sd, xvd, uvd, vd) (string value)#disk_prefix=<None># Number of seconds to wait for instance to shut down after# soft reboot request is made. We fall back to hard reboot if# instance does not shutdown within this window. (integer# value)#wait_soft_reboot_seconds=120# Set to "host-model" to clone the host CPU feature flags; to# "host-passthrough" to use the host CPU model exactly; to# "custom" to use a named CPU model; to "none" to not set any# CPU model. If virt_type="kvm|qemu", it will default to# "host-model", otherwise it will default to "none" (string# value)#cpu_mode=<None># Set to a named libvirt CPU model (see names listed in# /usr/share/libvirt/cpu_map.xml). Only has effect if# cpu_mode="custom" and virt_type="kvm|qemu" (string value)#cpu_model=<None># Location where libvirt driver will store snapshots before# uploading them to image service (string value)#snapshots_directory=$instances_path/snapshots# Location where the Xen hvmloader is kept (string value)#xen_hvmloader_path=/usr/lib/xen/boot/hvmloader# Specific cachemodes to use for different disk types e.g:# file=directsync,block=none (list value)#disk_cachemodes=# A path to a device that will be used as source of entropy on# the host. Permitted options are: /dev/random or /dev/hwrng# (string value)#rng_dev_path=<None># For qemu or KVM guests, set this option to specify a default# machine type per host architecture. You can find a list of# supported machine types in your environment by checking the# output of the "virsh capabilities"command. The format of the# value for this config option is host-arch=machine-type. For# example: x86_64=machinetype1,armv7l=machinetype2 (list# value)#hw_machine_type=<None># The data source used to the populate the host "serial" UUID# exposed to guest in the virtual BIOS. Permitted options are# "hardware", "os", "none" or "auto" (default). (string value)#sysinfo_serial=auto# A number of seconds to memory usage statistics period. Zero# or negative value mean to disable memory usage statistics.# (integer value)#mem_stats_period_seconds=10# List of uid targets and ranges.Syntax is guest-uid:host-# uid:countMaximum of 5 allowed. (list value)#uid_maps=# List of guid targets and ranges.Syntax is guest-gid:host-# gid:countMaximum of 5 allowed. (list value)#gid_maps=## Options defined in nova.virt.libvirt.imagebackend## VM Images format. Acceptable values are: raw, qcow2, lvm,# rbd, default. If default is specified, then use_cow_images# flag is used instead of this one. (string value)#images_type=default# LVM Volume Group that is used for VM images, when you# specify images_type=lvm. (string value)#images_volume_group=<None># Create sparse logical volumes (with virtualsize) if this# flag is set to True. (boolean value)#sparse_logical_volumes=false# Method used to wipe old volumes (valid options are: none,# zero, shred) (string value)#volume_clear=zero# Size in MiB to wipe at start of old volumes. 0 => all# (integer value)#volume_clear_size=0# The RADOS pool in which rbd volumes are stored (string# value)#images_rbd_pool=rbd# Path to the ceph configuration file to use (string value)#images_rbd_ceph_conf=# Discard option for nova managed disks (valid options are:# ignore, unmap). Need Libvirt(1.0.6) Qemu1.5 (raw format)# Qemu1.6(qcow2 format) (string value)#hw_disk_discard=<None>## Options defined in nova.virt.libvirt.imagecache## Allows image information files to be stored in non-standard# locations (string value)#image_info_filename_pattern=$instances_path/$image_cache_subdirectory_name/%(image)s.info# Should unused kernel images be removed? This is only safe to# enable if all compute nodes have been updated to support# this option. This will be enabled by default in future.# (boolean value)#remove_unused_kernels=false# Unused resized base images younger than this will not be# removed (integer value)#remove_unused_resized_minimum_age_seconds=3600# Write a checksum for files in _base to disk (boolean value)#checksum_base_images=false# How frequently to checksum base images (integer value)#checksum_interval_seconds=3600## Options defined in nova.virt.libvirt.utils## Compress snapshot images when possible. This currently# applies exclusively to qcow2 images (boolean value)#snapshot_compression=false## Options defined in nova.virt.libvirt.vif## Use virtio for bridge interfaces with KVM/QEMU (boolean# value)#use_virtio_for_bridges=true## Options defined in nova.virt.libvirt.volume## Number of times to rescan iSCSI target to find volume# (integer value)#num_iscsi_scan_tries=5# Number of times to rescan iSER target to find volume# (integer value)#num_iser_scan_tries=5# The RADOS client name for accessing rbd volumes (string# value)#rbd_user=<None># The libvirt UUID of the secret for the rbd_uservolumes# (string value)#rbd_secret_uuid=<None># Directory where the NFS volume is mounted on the compute# node (string value)#nfs_mount_point_base=$state_path/mnt# Mount options passedf to the NFS client. See section of the# nfs man page for details (string value)#nfs_mount_options=<None># Number of times to rediscover AoE target to find volume# (integer value)#num_aoe_discover_tries=3# Directory where the glusterfs volume is mounted on the# compute node (string value)#glusterfs_mount_point_base=$state_path/mnt# Use multipath connection of the iSCSI volume (boolean value)#iscsi_use_multipath=false# Use multipath connection of the iSER volume (boolean value)#iser_use_multipath=false# Path or URL to Scality SOFS configuration file (string# value)#scality_sofs_config=<None># Base dir where Scality SOFS shall be mounted (string value)#scality_sofs_mount_point=$state_path/scality# Protocols listed here will be accessed directly from QEMU.# Currently supported protocols: [gluster] (list value)#qemu_allowed_storage_drivers=[matchmaker_redis]## Options defined in oslo.messaging## Host to locate redis. (string value)#host=127.0.0.1# Use this port to connect to redis host. (integer value)#port=6379# Password for Redis server (optional). (string value)#password=<None>[matchmaker_ring]## Options defined in oslo.messaging## Matchmaker ring file (JSON). (string value)# Deprecated group;name - DEFAULT;matchmaker_ringfile#ringfile=/etc/oslo/matchmaker_ring.json[metrics]## Options defined in nova.scheduler.weights.metrics## Multiplier used for weighing metrics. (floating point value)#weight_multiplier=1.0# How the metrics are going to be weighed. This should be in# the form of "<name1>=<ratio1>, <name2>=<ratio2>, ...", where# <nameX> is one of the metrics to be weighed, and <ratioX> is# the corresponding ratio. So for "name1=1.0, name2=-1.0" The# final weight would be name1.value * 1.0 + name2.value *# -1.0. (list value)#weight_setting=# How to treat the unavailable metrics. When a metric is NOT# available for a host, if it is set to be True, it would# raise an exception, so it is recommended to use the# scheduler filter MetricFilter to filter out those hosts. If# it is set to be False, the unavailable metric would be# treated as a negative factor in weighing process, the# returned value would be set by the option# weight_of_unavailable. (boolean value)#required=true# The final weight value to be returned if required is set to# False and any one of the metrics set by weight_setting is# unavailable. (floating point value)#weight_of_unavailable=-10000.0[neutron]## Options defined in nova.api.metadata.handler## Set flag to indicate Neutron will proxy metadata requests# and resolve instance ids. (boolean value)# Deprecated group;name - DEFAULT;service_neutron_metadata_proxy#service_metadata_proxy=false# Shared secret to validate proxies Neutron metadata requests# (string value)# Deprecated group;name - DEFAULT;neutron_metadata_proxy_shared_secret#metadata_proxy_shared_secret=## Options defined in nova.network.neutronv2.api## URL for connecting to neutron (string value)# Deprecated group;name - DEFAULT;neutron_url#url=http://127.0.0.1:9696# Timeout value for connecting to neutron in seconds (integer# value)# Deprecated group;name - DEFAULT;neutron_url_timeout#url_timeout=30# User id for connecting to neutron in admin context (string# value)#admin_user_id=<None># Username for connecting to neutron in admin context (string# value)# Deprecated group;name - DEFAULT;neutron_admin_username#admin_username=<None># Password for connecting to neutron in admin context (string# value)# Deprecated group;name - DEFAULT;neutron_admin_password#admin_password=<None># Tenant id for connecting to neutron in admin context (string# value)# Deprecated group;name - DEFAULT;neutron_admin_tenant_id#admin_tenant_id=<None># Tenant name for connecting to neutron in admin context. This# option will be ignored if neutron_admin_tenant_id is set.# Note that with Keystone V3 tenant names are only unique# within a domain. (string value)# Deprecated group;name - DEFAULT;neutron_admin_tenant_name#admin_tenant_name=<None># Region name for connecting to neutron in admin context# (string value)# Deprecated group;name - DEFAULT;neutron_region_name#region_name=<None># Authorization URL for connecting to neutron in admin context# (string value)# Deprecated group;name - DEFAULT;neutron_admin_auth_url#admin_auth_url=http://localhost:5000/v2.0# If set, ignore any SSL validation issues (boolean value)# Deprecated group;name - DEFAULT;neutron_api_insecure#api_insecure=false# Authorization strategy for connecting to neutron in admin# context (string value)# Deprecated group;name - DEFAULT;neutron_auth_strategy#auth_strategy=keystone# Name of Integration Bridge used by Open vSwitch (string# value)# Deprecated group;name - DEFAULT;neutron_ovs_bridge#ovs_bridge=br-int# Number of seconds before querying neutron for extensions# (integer value)# Deprecated group;name - DEFAULT;neutron_extension_sync_interval#extension_sync_interval=600# Location of CA certificates file to use for neutron client# requests. (string value)# Deprecated group;name - DEFAULT;neutron_ca_certificates_file#ca_certificates_file=<None># Allow an instance to have multiple vNICs attached to the# same Neutron network. (boolean value)#allow_duplicate_networks=false[osapi_v3]## Options defined in nova.api.openstack## Whether the V3 API is enabled or not (boolean value)#enabled=false# A list of v3 API extensions to never load. Specify the# extension aliases here. (list value)#extensions_blacklist=# If the list is not empty then a v3 API extension will only# be loaded if it exists in this list. Specify the extension# aliases here. (list value)#extensions_whitelist=[rdp]## Options defined in nova.rdp## Location of RDP html5 console proxy, in the form# "http://127.0.0.1:6083/" (string value)#html5_proxy_base_url=http://127.0.0.1:6083/# Enable RDP related features (boolean value)#enabled=false[serial_console]## Options defined in nova.cmd.serialproxy## Host on which to listen for incoming requests (string value)#serialproxy_host=0.0.0.0# Port on which to listen for incoming requests (integer# value)#serialproxy_port=6083## Options defined in nova.console.serial## Enable serial console related features (boolean value)#enabled=false# Range of TCP ports to use for serial ports on compute hosts# (string value)#port_range=10000:20000# Location of serial console proxy. (string value)#base_url=ws://127.0.0.1:6083/# IP address on which instance serial console should listen# (string value)#listen=127.0.0.1# The address to which proxy clients (like nova-serialproxy)# should connect (string value)#proxyclient_address=127.0.0.1[spice]## Options defined in nova.cmd.spicehtml5proxy## Host on which to listen for incoming requests (string value)# Deprecated group;name - DEFAULT;spicehtml5proxy_host#html5proxy_host=0.0.0.0# Port on which to listen for incoming requests (integer# value)# Deprecated group;name - DEFAULT;spicehtml5proxy_port#html5proxy_port=6082## Options defined in nova.spice## Location of spice HTML5 console proxy, in the form# "http://127.0.0.1:6082/spice_auto.html" (string value)#html5proxy_base_url=http://127.0.0.1:6082/spice_auto.html# IP address on which instance spice server should listen# (string value)#server_listen=127.0.0.1# The address to which proxy clients (like nova-# spicehtml5proxy) should connect (string value)#server_proxyclient_address=127.0.0.1# Enable spice related features (boolean value)#enabled=false# Enable spice guest agent support (boolean value)#agent_enabled=true# Keymap for spice (string value)#keymap=en-us[ssl]## Options defined in nova.openstack.common.sslutils## CA certificate file to use to verify connecting clients.# (string value)#ca_file=<None># Certificate file to use when starting the server securely.# (string value)#cert_file=<None># Private key file to use when starting the server securely.# (string value)#key_file=<None>[trusted_computing]## Options defined in nova.scheduler.filters.trusted_filter## Attestation server HTTP (string value)#attestation_server=<None># Attestation server Cert file for Identity verification# (string value)#attestation_server_ca_file=<None># Attestation server port (string value)#attestation_port=8443# Attestation web API URL (string value)#attestation_api_url=/OpenAttestationWebServices/V1.0# Attestation authorization blob - must change (string value)#attestation_auth_blob=<None># Attestation status cache valid period length (integer value)#attestation_auth_timeout=60# Disable SSL cert verification for Attestation service# (boolean value)#attestation_insecure_ssl=false[upgrade_levels]## Options defined in nova.baserpc## Set a version cap for messages sent to the base api in any# service (string value)#baseapi=<None>## Options defined in nova.cells.rpc_driver## Set a version cap for messages sent between cells services# (string value)#intercell=<None>## Options defined in nova.cells.rpcapi## Set a version cap for messages sent to local cells services# (string value)#cells=<None>## Options defined in nova.cert.rpcapi## Set a version cap for messages sent to cert services (string# value)#cert=<None>## Options defined in nova.compute.rpcapi## Set a version cap for messages sent to compute services. If# you plan to do a live upgrade from havana to icehouse, you# should set this option to "icehouse-compat" before beginning# the live upgrade procedure. (string value)#compute=<None>## Options defined in nova.conductor.rpcapi## Set a version cap for messages sent to conductor services# (string value)#conductor=<None>## Options defined in nova.console.rpcapi## Set a version cap for messages sent to console services# (string value)#console=<None>## Options defined in nova.consoleauth.rpcapi## Set a version cap for messages sent to consoleauth services# (string value)#consoleauth=<None>## Options defined in nova.network.rpcapi## Set a version cap for messages sent to network services# (string value)#network=<None>## Options defined in nova.scheduler.rpcapi## Set a version cap for messages sent to scheduler services# (string value)#scheduler=<None>[vmware]## Options defined in nova.virt.vmwareapi.driver## Hostname or IP address for connection to VMware VC host.# (string value)#host_ip=<None># Port for connection to VMware VC host. (integer value)#host_port=443# Username for connection to VMware VC host. (string value)#host_username=<None># Password for connection to VMware VC host. (string value)#host_password=<None># Name of a VMware Cluster ComputeResource. (multi valued)#cluster_name=<None># Regex to match the name of a datastore. (string value)#datastore_regex=<None># The interval used for polling of remote tasks. (floating# point value)#task_poll_interval=0.5# The number of times we retry on failures, e.g., socket# error, etc. (integer value)#api_retry_count=10# VNC starting port (integer value)#vnc_port=5900# Total number of VNC ports (integer value)#vnc_port_total=10000# Whether to use linked clone (boolean value)#use_linked_clone=true# Optional VIM Service WSDL Location e.g# http://<server>/vimService.wsdl. Optional over-ride to# default location for bug work-arounds (string value)#wsdl_location=<None>## Options defined in nova.virt.vmwareapi.vif## Physical ethernet adapter name for vlan networking (string# value)#vlan_interface=vmnic0# Name of Integration Bridge (string value)#integration_bridge=br-int## Options defined in nova.virt.vmwareapi.vim_util## The maximum number of ObjectContent data objects that should# be returned in a single result. A positive value will cause# the operation to suspend the retrieval when the count of# objects reaches the specified maximum. The server may still# limit the count to something less than the configured value.# Any remaining objects may be retrieved with additional# requests. (integer value)#maximum_objects=100[xenserver]## Options defined in nova.virt.xenapi.agent## Number of seconds to wait for agent reply (integer value)#agent_timeout=30# Number of seconds to wait for agent to be fully operational# (integer value)#agent_version_timeout=300# Number of seconds to wait for agent reply to resetnetwork# request (integer value)#agent_resetnetwork_timeout=60# Specifies the path in which the XenAPI guest agent should be# located. If the agent is present, network configuration is# not injected into the image. Used if# compute_driver=xenapi.XenAPIDriver and flat_injected=True# (string value)#agent_path=usr/sbin/xe-update-networking# Disables the use of the XenAPI agent in any image regardless# of what image properties are present. (boolean value)#disable_agent=false# Determines if the XenAPI agent should be used when the image# used does not contain a hint to declare if the agent is# present or not. The hint is a glance property# "xenapi_use_agent" that has the value "True" or "False".# Note that waiting for the agent when it is not present will# significantly increase server boot times. (boolean value)#use_agent_default=false## Options defined in nova.virt.xenapi.client.session## Timeout in seconds for XenAPI login. (integer value)#login_timeout=10# Maximum number of concurrent XenAPI connections. Used only# if compute_driver=xenapi.XenAPIDriver (integer value)#connection_concurrent=5## Options defined in nova.virt.xenapi.driver## URL for connection to XenServer/Xen Cloud Platform. A# special value of unix://local can be used to connect to the# local unix socket.  Required if# compute_driver=xenapi.XenAPIDriver (string value)#connection_url=<None># Username for connection to XenServer/Xen Cloud Platform.# Used only if compute_driver=xenapi.XenAPIDriver (string# value)#connection_username=root# Password for connection to XenServer/Xen Cloud Platform.# Used only if compute_driver=xenapi.XenAPIDriver (string# value)#connection_password=<None># The interval used for polling of coalescing vhds. Used only# if compute_driver=xenapi.XenAPIDriver (floating point value)#vhd_coalesce_poll_interval=5.0# Ensure compute service is running on host XenAPI connects# to. (boolean value)#check_host=true# Max number of times to poll for VHD to coalesce. Used only# if compute_driver=xenapi.XenAPIDriver (integer value)#vhd_coalesce_max_attempts=20# Base path to the storage repository (string value)#sr_base_path=/var/run/sr-mount# The iSCSI Target Host (string value)#target_host=<None># The iSCSI Target Port, default is port 3260 (string value)#target_port=3260# IQN Prefix (string value)#iqn_prefix=iqn.2010-10.org.openstack# Used to enable the remapping of VBD dev (Works around an# issue in Ubuntu Maverick) (boolean value)#remap_vbd_dev=false# Specify prefix to remap VBD dev to (ex. /dev/xvdb -># /dev/sdb) (string value)#remap_vbd_dev_prefix=sd## Options defined in nova.virt.xenapi.image.bittorrent## Base URL for torrent files. (string value)#torrent_base_url=<None># Probability that peer will become a seeder. (1.0 = 100%)# (floating point value)#torrent_seed_chance=1.0# Number of seconds after downloading an image via BitTorrent# that it should be seeded for other peers. (integer value)#torrent_seed_duration=3600# Cached torrent files not accessed within this number of# seconds can be reaped (integer value)#torrent_max_last_accessed=86400# Beginning of port range to listen on (integer value)#torrent_listen_port_start=6881# End of port range to listen on (integer value)#torrent_listen_port_end=6891# Number of seconds a download can remain at the same progress# percentage w/o being considered a stall (integer value)#torrent_download_stall_cutoff=600# Maximum number of seeder processes to run concurrently# within a given dom0. (-1 = no limit) (integer value)#torrent_max_seeder_processes_per_host=1## Options defined in nova.virt.xenapi.pool## To use for hosts with different CPUs (boolean value)#use_join_force=true## Options defined in nova.virt.xenapi.vif## Name of Integration Bridge used by Open vSwitch (string# value)#ovs_integration_bridge=xapi1## Options defined in nova.virt.xenapi.vm_utils## Cache glance images locally. `all` will cache all images,# `some` will only cache images that have the image_property# `cache_in_nova=True`, and `none` turns off caching entirely# (string value)#cache_images=all# Compression level for images, e.g., 9 for gzip -9. Range is# 1-9, 9 being most compressed but most CPU intensive on dom0.# (integer value)#image_compression_level=<None># Default OS type (string value)#default_os_type=linux# Time to wait for a block device to be created (integer# value)#block_device_creation_timeout=10# Maximum size in bytes of kernel or ramdisk images (integer# value)#max_kernel_ramdisk_size=16777216# Filter for finding the SR to be used to install guest# instances on. To use the Local Storage in default# XenServer/XCP installations set this flag to other-config# :i18n-key=local-storage. To select an SR with a different# matching criteria, you could set it to other-# config:my_favorite_sr=true. On the other hand, to fall back# on the Default SR, as displayed by XenCenter, set this flag# to: default-sr:true (string value)#sr_matching_filter=default-sr:true# Whether to use sparse_copy for copying data on a resize down# (False will use standard dd). This speeds up resizes down# considerably since large runs of zeros wont have to be# rsynced (boolean value)#sparse_copy=true# Maximum number of retries to unplug VBD (integer value)#num_vbd_unplug_retries=10# Whether or not to download images via Bit Torrent# (all|some|none). (string value)#torrent_images=none# Name of network to use for booting iPXE ISOs (string value)#ipxe_network_name=<None># URL to the iPXE boot menu (string value)#ipxe_boot_menu_url=<None># Name and optionally path of the tool used for ISO image# creation (string value)#ipxe_mkisofs_cmd=mkisofs## Options defined in nova.virt.xenapi.vmops## Number of seconds to wait for instance to go to running# state (integer value)#running_timeout=60# The XenAPI VIF driver using XenServer Network APIs. (string# value)#vif_driver=nova.virt.xenapi.vif.XenAPIBridgeDriver# Dom0 plugin driver used to handle image uploads. (string# value)#image_upload_handler=nova.virt.xenapi.image.glance.GlanceStore## Options defined in nova.virt.xenapi.volume_utils## Number of seconds to wait for an SR to settle if the VDI# does not exist when first introduced (integer value)#introduce_vdi_retry_wait=20[zookeeper]## Options defined in nova.servicegroup.drivers.zk## The ZooKeeper addresses for servicegroup service in the# format of host1:port,host2:port,host3:port (string value)#address=<None># The recv_timeout parameter for the zk session (integer# value)#recv_timeout=4000# The prefix used in ZooKeeper to store ephemeral nodes# (string value)#sg_prefix=/servicegroups# Number of seconds to wait until retrying to join the session# (integer value)#sg_retry_interval=5

 

openstack-nova