首页 > 代码库 > osx升级到10.10后，用pod install报错最终解决办法

osx升级到10.10后，用pod install报错最终解决办法

2024-08-08 20:18:55   231人阅读

转载自:http://blog.csdn.net/liuyujinglove/article/details/40582197

 

http://blog.csdn.net/dqjyong/article/details/37958067
大概步骤如下：

    Open Xcode 6
    Open Preferences
    Click theLocationstab
    Change theCommand Line Toolsversion toXcode 6.0
    Uninstallcocoapods
   

a.$ sudo gem uninstall cocoapods

    Installxcodeproj

    a.$ sudo gem install xcodeproj

    Installcocoapods
 

 a.$ sudo gem install cocoapods
 $ pod --version

如果你执行到第6步：sudo gem install xcodeproj 成功，但是到第七步：$ sudo gem install cocoapods时失败，错误信息如下：

ERROR:Could not find a valid gem ‘cocoapods‘ (>= 0), here is why:Unable to download data from https://rubygems.org/ - Errno::ETIMEDOUT: Operation timed out - connect(2) (https://rubygems.org/latest_specs.4.8.gz)ERROR:Possible alternatives: cocoapods

意识是说在官方源中找不到我们需要的源，这时怎么办呢，网上找到一篇博客，这样做的，切换官方源，也即是改变源的获取地址

这时候我们需要改变 gem source, 参考[4], [5]。需要在终端中执行如下命令: 

$ gem sources -l$ gem sources --remove https://rubygems.org/$ gem sources -a https://ruby.taobao.org/$ gem sources -l


接下来输入以下命令：

$ pod setupThis processwilllikely take a while as this command clones the CocoaPods Specs repositoryinto ~/.cocoapods/ on your computer. [6]


至此CocoaPods安装完毕。

注：如果漏掉 "$ pod setup" 命令，而直接执行"$ pod init"

会有类似以下的error信息：

$ pod initSetting up CocoaPods master repo[!] /usr/bin/git clone ‘https://github.com/CocoaPods/Specs.git‘ master --depth=1Cloning into ‘master‘...error: RPC failed; result=52, HTTP code = 0fatal: The remote end hung up unexpectedly/Library/Ruby/Gems/2.0.0/gems/claide-0.6.1/lib/claide/command.rb:304:in `handle_exception‘: undefined method `verbose?‘ for nil:NilClass (NoMethodError)from /Library/Ruby/Gems/2.0.0/gems/claide-0.6.1/lib/claide/command.rb:284:in `rescue in run‘from /Library/Ruby/Gems/2.0.0/gems/claide-0.6.1/lib/claide/command.rb:274:in `run‘from /Library/Ruby/Gems/2.0.0/gems/cocoapods-0.33.1/lib/cocoapods/command.rb:48:in `run‘from /Library/Ruby/Gems/2.0.0/gems/cocoapods-0.33.1/bin/pod:33:in `<top (required)>‘from /usr/bin/pod:23:in `load‘from /usr/bin/pod:23:in `<main>‘ "


以上操作步骤完成后在进行：

$ sudo gem install cocoapods


这时就成功了！

剩下的就是和以前的一样在工程目录下，建Podfile，执行pod install，打开xworkspace等，顺利完成！！！

参考博客：http://www.cnblogs.com/cwgk/p/3370949.html

osx升级到10.10后，用pod install报错最终解决办法


联系
我们