敌方飞机应该不定时的出现，有自己的生命周期、运动轨迹。这个类用来管理敌机的产生、移动、爆炸、销毁等。

敌机管理类主要函数例如以下

	//绑定控制器(更新分数)
	void bindController(Controller* controller);

	//依据分数决定加入敌机速度
	void addSpeed(float dt);

	// 加入敌机1
	void addEnemy1(float dt); 

	// 加入敌机2
	void addEnemy2(float dt); 

	// 加入敌机3
	void addEnemy3(float dt); 

	// 加入敌机4
	void addEnemy4(float dt);

	// 敌机爆炸
	void blowupEnemy(Enemy* pEnemySprite);	

	// 移除敌机pNode
	void removeEnemy(Node *pNode);		

其成员变量例如以下

Vector<Enemy*> vecEnemy;// 敌机容器。用于遍历碰撞问题
Controller* m_controlLayer;	//控制器
float m_fSpeed;	//加入敌机速度
float m_fEnemy1;
float m_fEnemy2;
float m_fEnemy3;
float m_fEnemy4;

还有就是，由于分数是要存储在数据库中的。所以我们用一个控制器来管理分数。对于我方飞机的触摸移动，也能够用控制器来控制。由于本游戏中的我方飞机操作简单，代码就嵌在了我方飞机类中。

(⊙o⊙)…扯远了。先介绍敌机管理类的实现。再讲控制器。

bool EnemyManager::init()
{
	if (!Layer::init())
	{
		return false;
	}
	cocos2d::Vector<SpriteFrame*> vecTemp;
	vecTemp.clear();

	// 敌机1爆炸
	for (int i = 0; i < 4; i++)
	{
		auto blowUpName = __String::createWithFormat("enemy1_down%d.png", i + 1);
		auto tempBlowUp = SpriteFrameCache::getInstance()->getSpriteFrameByName(
			blowUpName->getCString());
		vecTemp.pushBack(tempBlowUp);
	}

	Animation* pAnimation1 = Animation::createWithSpriteFrames(vecTemp, 0.1f);
	
	// 加入到AnimationCache。而且命名为Enemy1Blowup
	AnimationCache::getInstance()->addAnimation(pAnimation1, "Enemy1Blowup");

	// 敌机2爆炸
	vecTemp.clear();
	for (int i = 0; i < 4; i++)
	{
		auto blowUpName = __String::createWithFormat("enemy2_down%d.png", i + 1);
		auto tempBlowUp = SpriteFrameCache::getInstance()->getSpriteFrameByName(
			blowUpName->getCString());
		vecTemp.pushBack(tempBlowUp);
	}

	Animation *pAnimation2 = Animation::createWithSpriteFrames(vecTemp,0.1f);

	AnimationCache::getInstance()->addAnimation(pAnimation2, "Enemy2Blowup");

	// 敌机3爆炸
	vecTemp.clear();
	for (int i = 0; i < 4; i++)
	{
		auto blowUpName = __String::createWithFormat("enemy3_down%d.png", i + 1);
		auto tempBlowUp = SpriteFrameCache::getInstance()->getSpriteFrameByName(
			blowUpName->getCString());
		vecTemp.pushBack(tempBlowUp);
	}

	Animation *pAnimation3 = Animation::createWithSpriteFrames(vecTemp,0.1f);

	AnimationCache::getInstance()->addAnimation(pAnimation3, "Enemy3Blowup");

	// 敌机4爆炸
	vecTemp.clear();
	for (int i = 0; i < 4; i++)
	{
		auto blowUpName = __String::createWithFormat("enemy4_down%d.png", i + 1);
		auto tempBlowUp = SpriteFrameCache::getInstance()->getSpriteFrameByName(
			blowUpName->getCString());
		vecTemp.pushBack(tempBlowUp);
	}

	Animation *pAnimation4 = Animation::createWithSpriteFrames(vecTemp, 0.1f);

	AnimationCache::getInstance()->addAnimation(pAnimation4, "Enemy4Blowup");

	//依据当前分数来设定加入各种敌机的速度
	this->schedule(schedule_selector(EnemyManager::addSpeed), 0.1f);

	return true;
}

//绑定控制器(更新分数)
void EnemyManager::bindController(Controller* controller)
{
	this->m_controlLayer = controller;
	m_controlLayer->retain();
}

//依据分数决定加入敌机速度
void EnemyManager::addSpeed(float dt)
{
	m_fSpeed = m_controlLayer->getSaveData()->getScore() / 1000 + 1;

	this->schedule(schedule_selector(EnemyManager::addEnemy1), m_fEnemy1 / m_fSpeed); // 每1秒出现一架敌机1
	this->schedule(schedule_selector(EnemyManager::addEnemy2), m_fEnemy2 / m_fSpeed);
	this->schedule(schedule_selector(EnemyManager::addEnemy3), m_fEnemy3 / m_fSpeed);
	this->schedule(schedule_selector(EnemyManager::addEnemy4), m_fEnemy4 / m_fSpeed);

}

void EnemyManager::addEnemy1(float dt)
{
	Size size = Director::getInstance()->getVisibleSize();

	Enemy *pEnemySprite = Enemy::create();
	pEnemySprite->setEnemyByType(Enemy1);
	pEnemySprite->setTag(Enemy1);
	this->addChild(pEnemySprite);
	vecEnemy.pushBack(pEnemySprite);

	// 设置运动轨迹 以及到终点时调用的函数
	ccBezierConfig m_bezier;
	m_bezier.controlPoint_1 = ccp(size.width/20, size.height*0.7);
	m_bezier.controlPoint_2 = ccp(size.width/2, size.height/2);
	m_bezier.endPosition = ccp(size.width*0.9, size.height*0.9);
	auto actionMove = BezierTo::create(2.0f, m_bezier);

	auto actionDone = CallFuncN::create(CC_CALLBACK_1(EnemyManager::removeEnemy, this));
	Sequence* sequence = Sequence::create(actionMove, actionDone, NULL);
	pEnemySprite->runAction(sequence);

	//依据分数改变敌机数量
	
}

void EnemyManager::addEnemy2(float dt)
{
	Size size = Director::getInstance()->getVisibleSize();

	Enemy *pEnemySprite = Enemy::create();
	pEnemySprite->setEnemyByType(Enemy2);
	pEnemySprite->setTag(Enemy2);
	this->addChild(pEnemySprite);
	vecEnemy.pushBack(pEnemySprite);

	// 设置运动轨迹 以及到终点时调用的函数
	ccBezierConfig m_bezier;
	m_bezier.controlPoint_1 = ccp(40, 500);
	m_bezier.controlPoint_2 = ccp(250, 400);
	m_bezier.endPosition = ccp(400, 700);
	auto actionMove = BezierTo::create(4.0f, m_bezier);

	auto actionDone = CallFuncN::create(CC_CALLBACK_1(EnemyManager::removeEnemy, this));
	Sequence* sequence = Sequence::create(actionMove, actionDone, NULL); 
	pEnemySprite->runAction(sequence);
}

void EnemyManager::addEnemy3(float dt)
{
	Size size = Director::getInstance()->getVisibleSize();

	Enemy *pEnemySprite = Enemy::create();
	pEnemySprite->setEnemyByType(Enemy3);
	pEnemySprite->setTag(Enemy3);
	this->addChild(pEnemySprite);
	vecEnemy.pushBack(pEnemySprite);

	// 设置运动轨迹 以及到终点时调用的函数
	ccBezierConfig m_bezier;
	m_bezier.controlPoint_1 = ccp(60, 550);
	m_bezier.controlPoint_2 = ccp(100, 400);
	m_bezier.endPosition = ccp(400, 700);
	auto actionMove = BezierTo::create(6.0f, m_bezier);

	auto actionDone = CallFuncN::create(CC_CALLBACK_1(EnemyManager::removeEnemy, this));
	Sequence* sequence = Sequence::create(actionMove, actionDone, NULL); 
	pEnemySprite->runAction(sequence);
}

// 加入敌机4
void EnemyManager::addEnemy4(float dt)
{
	Enemy *pEnemySprite = Enemy::create();
	pEnemySprite->setEnemyByType(Enemy4);
	pEnemySprite->setTag(Enemy4);
	this->addChild(pEnemySprite);
	vecEnemy.pushBack(pEnemySprite);

	// 设置运动轨迹 以及到终点时调用的函数
	ccBezierConfig m_bezier;
	m_bezier.controlPoint_1 = ccp(80, 650);
	m_bezier.controlPoint_2 = ccp(350, 450);
	m_bezier.endPosition = ccp(400, 700);
	auto actionMove = BezierTo::create(8.0f, m_bezier);

	auto actionDone = CallFuncN::create(CC_CALLBACK_1(EnemyManager::removeEnemy, this));
	
	// 按顺序运行 敌机飞到边缘。敌机移动结束
	Sequence* sequence = Sequence::create(actionMove, actionDone, NULL);
	pEnemySprite->runAction(sequence);
}

void EnemyManager::removeEnemy(Node *pNode)
{
	Enemy* enemy = (Enemy*)pNode;
	if (enemy != NULL)
	{
		this->removeChild(enemy, true);
		vecEnemy.eraseObject(enemy);
	}
}

void EnemyManager::blowupEnemy(Enemy* pEnemySprite)
{
	auto saveData = http://www.mamicode.com/m_controlLayer->getSaveData();>


每种类型的敌机的爆炸代码比較短，直接在init()函数中进行初始化。为了使游戏难度不断添加，会依据分数来改变加入敌机的速度。敌机的运动轨迹大同小异，只是贝塞尔曲线看起来确实挺不错的。