derek@ubox:~/share$ qemu-system-arm -M vexpress-a9 -m 512M -kernel myImage -nographic -append "root=/dev/mmcblk0 console=ttyAMA0" -sd a9rootfs.ext3
WARNING: Image format was not specified for ‘a9rootfs.ext3‘ and probing guessed raw.
         Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
         Specify the ‘raw‘ format explicitly to remove the restrictions.
pulseaudio: set_sink_input_volume() failed
pulseaudio: Reason: Invalid argument
pulseaudio: set_sink_input_mute() failed
pulseaudio: Reason: Invalid argument
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Linux version 3.16.45 (derek@ubox) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #1 SMP Sun Jul 16 21:32:51 CST 2017
CPU: ARMv7 Processor [410fc090] revision 0 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: ARM-Versatile Express
Memory policy: Data cache writeback
CPU: All CPU(s) started in SVC mode.
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
PERCPU: Embedded 7 pages/cpu @9fbed000 s6976 r8192 d13504 u32768
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
Kernel command line: root=/dev/mmcblk0 console=ttyAMA0
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 513184K/524288K available (4650K kernel code, 191K rwdata, 1292K rodata, 246K init, 149K bss, 11104K reserved)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
    vmalloc : 0xa0800000 - 0xff000000   (1512 MB)
    lowmem  : 0x80000000 - 0xa0000000   ( 512 MB)
    modules : 0x7f000000 - 0x80000000   (  16 MB)
      .text : 0x80008000 - 0x805d5ba4   (5943 kB)
      .init : 0x805d6000 - 0x80613b40   ( 247 kB)
      .data : 0x80614000 - 0x80643ea0   ( 192 kB)
       .bss : 0x80643ea8 - 0x80669528   ( 150 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
        RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS:16 nr_irqs:16 16
GIC CPU mask not found - kernel will fail to boot.
GIC CPU mask not found - kernel will fail to boot.
smp_twd: clock not found -2
L2C: DT/platform modifies aux control register: 0x02020000 -> 0x02420000
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 dynamic clock gating disabled, standby mode disabled
L2C-310 cache controller enabled, 8 ways, 128 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x46420001
Console: colour dummy device 80x30
Calibrating local timer... 97.02MHz.
Calibrating delay loop... 852.78 BogoMIPS (lpj=4263936)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
missing device node for CPU 0
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x604712a8 - 0x60471300
Brought up 1 CPUs
SMP: Total of 1 processors activated (852.78 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 0
futex hash table entries: 256 (order: 2, 16384 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor ladder
cpuidle: using governor menu
hw-breakpoint: debug architecture 0x4 unsupported.
Serial: AMBA PL011 UART driver
mb:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 37, base_baud = 0) is a PL011 rev1
console [ttyAMA0] enabled
mb:uart1: ttyAMA1 at MMIO 0x1000a000 (irq = 38, base_baud = 0) is a PL011 rev1
mb:uart2: ttyAMA2 at MMIO 0x1000b000 (irq = 39, base_baud = 0) is a PL011 rev1
mb:uart3: ttyAMA3 at MMIO 0x1000c000 (irq = 40, base_baud = 0) is a PL011 rev1
fixed-dummy: no parameters
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Initialized.
Switched to clocksource v2m-timer1
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
CPU PMU: probing PMU on CPU 0
hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 1 counters available
squashfs: version 4.0 (2009/01/31) Phillip Lougher
jffs2: version 2.2. (NAND) ? 2001-2006 Red Hat, Inc.
9p: Installing v9fs 9p2000 file system support
msgmni has been set to 1002
io scheduler noop registered (default)
clcd-pl11x ct:clcd: PL111 rev2 at 0x10020000
clcd-pl11x ct:clcd: CT-CA9X4 hardware, XVGA display
Console: switching to colour frame buffer device 128x48
physmap platform flash device: 04000000 at 40000000
physmap-flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
physmap platform flash device: 04000000 at 44000000
physmap-flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
Concatenating MTD devices:
(0): "physmap-flash"
(1): "physmap-flash"
into device "physmap-flash"
libphy: smsc911x-mdio: probed
smsc911x smsc911x eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=smsc911x-fffffff:01, irq=-1)
smsc911x smsc911x eth0: MAC Address: 52:54:00:12:34:56
isp1760 isp1760: NXP ISP1760 USB Host Controller
isp1760 isp1760: new USB bus registered, assigned bus number 1
isp1760 isp1760: Scratch test failed.
isp1760 isp1760: can‘t setup: -19
isp1760 isp1760: USB bus 1 deregistered
isp1760: Failed to register the HCD device
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
rtc-pl031 mb:rtc: rtc core: registered pl031 as rtc0
mmci-pl18x mb:mmci: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 41,42 (pio)
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
mmc0: host does not support reading read-only switch. assuming write-enable.
mmc0: new SD card at address 4567
input: AT Raw Set 2 keyboard as /devices/mb:kmi0/serio0/input/input0
mmcblk0: mmc0:4567 QEMU! 32.0 MiB 
 mmcblk0: unknown partition table
aaci-pl041 mb:aaci: ARM AC‘97 Interface PL041 rev0 at 0x10004000, irq 43
aaci-pl041 mb:aaci: FIFO 512 entries
oprofile: using arm/armv7-ca9
TCP: cubic registered
NET: Registered protocol family 17
9pnet: Installing 9P2000 support
rtc-pl031 mb:rtc: setting system clock to 2017-07-16 13:59:34 UTC (1500213574)
ALSA device list:
  #0: ARM AC‘97 Interface PL041 rev0 at 0x10004000, irq 43
input: ImExPS/2 Generic Explorer Mouse as /devices/mb:kmi1/serio1/input/input2
kjournald starting.  Commit interval 5 seconds
EXT3-fs (mmcblk0): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 179:0.
Freeing unused kernel memory: 244K (805d6000 - 80613000)
random: nonblocking pool is initialized
can‘t run ‘/etc/init.d/rcS‘: No such file or directory

Please press Enter to activate this console. 
/ # uname -a
Linux (none) 3.16.45 #1 SMP Sun Jul 16 21:32:51 CST 2017 armv7l GNU/Linux
/ # 
/ #