As you must have experienced, instead of landing immediately, an aircraft sometimes waits in a holding loop close to the runway. This holding mechanism is required by air traffic controllers to space apart aircraft as much as possible on the runway (while keeping delays low). It is formally defined as a ``holding pattern‘‘ and is a predetermined maneuver designed to keep an aircraft within a specified airspace (see Figure 1 for an example).

Jim Tarjan, an air-traffic controller, has asked his brother Robert to help him to improve the behavior of the airport.

The TRACON area 

The Terminal Radar Approach CONtrol (TRACON) controls aircraft approaching and departing when they are between 5 and 50 miles of the airport. In this final scheduling process, air traffic controllers make some aircraft wait before landing. Unfortunately this ``waiting‘‘ process is complex as aircraft follow predetermined routes and their speed cannot be changed. To reach some degree of flexibility in the process, the basic delaying procedure is to make aircraft follow a holding pattern that has been designed for the TRACON area. Such patterns generate a constant prescribed delay for an aircraft (see Figure 1 for an example). Several holding patterns may exist in the same TRACON.

In the following, we assume that there is a single runway and that when an aircraft enters the TRACON area, it is assigned an early landing time, a late landing time and a possible holding pattern. The early landing time corresponds to the situation where the aircraft does not wait and lands as soon as possible. The late landing time corresponds to the situation where the aircraft waits in the prescribed holding pattern and then lands at that time. We assume that an aircraft enters at most one holding pattern. Hence, the early and late landing times are the only two possible times for the landing.

The security gap is the minimal elapsed time between consecutive landings. The objective is to maximize the security gap. Robert believes that you can help.

Example 

Assume there are 10 aircraft in the TRACON area. Table 1 provides the corresponding early and late landing times (columns ``Early‘‘ and ``Late‘‘).

The maximal security gap is 10 and the corresponding solution is reported in Table 1 (column ``Solution‘‘). In this solution, the aircraft land in the following order: A₈, A₁, A₆, A₁₀, A₃, A₉, A₂, A₇, A₅, A₄. The security gap is realized by aircraft A₁ and A₆.

Input 

The input file, that contains all the relevant data, contains several test cases

Each test case is described in the following way. The first line contains the number n of aircraft ( 2n2000). This line is followed by n lines. Each of these lines contains two integers, which represent the early landing time and the late landing time of an aircraft. Note that all times t are such that 0t10⁷.

Output 

For each input case, your program has to write a line that conttains the maximal security gap between consecutive landings.

Sample Input 

 
10
44 156
153 182
48 109
160 201
55 186
54 207
55 165
17 58
132 160
87 197

Sample Output 

 
10

Note: The input file corresponds to Table 1.

Robert‘s Hints

Optimization vs. Decision

Robert advises you to work on the decision variant of the problem. It can then be stated as follows: Given an integer p, and an instance of the optimization problem, the question is to decide if there is a solution with security gap p or not. Note that, if you know how to solve the decision variant of an optimization problem, you can build a binary search algorithm to find the optimal solution.

 

On decision

Robert believes that the decision variant of the problem can be modeled as a very particular boolean satisfaction problem. Robert suggests to associate a boolean variable per aircraft stating whether the aircraft is early (variable takes value ``true‘‘) or late (value ``false‘‘). It should then be easy to see that for some aircraft to land at some time has consequences for the landing times of other aircraft. For instance in Table 1 and with a delay of 10, if aircraft A₁ lands early, then aircraft A₃has to land late. And of course, if aircraft A₃ lands early, then aircraft A₁ has to land late. That is, aircraft A₁ and A₃ cannot both land early and formula (A₁  ?A₃)  (A₃  ?A₁) must hold.

And now comes Robert‘s big insight: our problem has a solution, if and only if we have no contradiction. A contradiction being something like A_i  ?A_i.

二分答案走2 - sat

  1 #include <iostream>
  2 #include <cstdio>
  3 #include <cstring>
  4 #include <algorithm>
  5 #include <stack>
  6 #include <vector>
  7 #include <cmath>
  8 
  9 using namespace std;
 10 
 11 const int MAX_N = 4005;
 12 int N,dfs_clock,scc_cnt;
 13 int low[MAX_N],pre[MAX_N],cmp[MAX_N];
 14 int E[MAX_N],L[MAX_N];
 15 stack<int> S;
 16 vector<int> G[MAX_N];
 17 
 18 void dfs(int u) {
 19         low[u] = pre[u] = ++dfs_clock;
 20         S.push(u);
 21         for(int i = 0; i < G[u].size(); ++i) {
 22                 int v = G[u][i];
 23                 if(!pre[v]) {
 24                         dfs(v);
 25                         low[u] = min(low[u],low[v]);
 26                 } else if(!cmp[v]) {
 27                         low[u] = min(low[u],pre[v]);
 28                 }
 29         }
 30 
 31         if(pre[u] == low[u]) {
 32                 ++scc_cnt;
 33                 for(;;) {
 34                         int x = S.top(); S.pop();
 35                         cmp[x] = scc_cnt;
 36                         if(x == u) break;
 37                 }
 38         }
 39 }
 40 
 41 void scc() {
 42         dfs_clock = scc_cnt = 0;
 43         memset(cmp,0,sizeof(cmp));
 44         memset(pre,0,sizeof(pre));
 45 
 46         for(int i = 1; i <= 2 * N; ++i){
 47                 if(!pre[i]) dfs(i);
 48         }
 49 }
 50 
 51 bool check(int x) {
 52        for(int i = 1; i <= 2 * N; ++i) G[i].clear();
 53 
 54        for(int i = 1; i <= N; ++i) {
 55             for(int j = 1; j <= N; ++j) {
 56                     if(i == j) continue;
 57                     if(abs(E[i] - E[j]) < x) {
 58                             G[i].push_back(j + N);
 59                             G[j].push_back(i + N);
 60                     }
 61                     if(abs(E[i] - L[j]) < x) {
 62                             G[i].push_back(j);
 63                             G[j + N].push_back(i + N);
 64                     }
 65                     if(abs(L[i] - E[j]) < x) {
 66                             G[i + N].push_back(j + N);
 67                             G[j].push_back(i);
 68                     }
 69                     if(abs(L[i] - L[j]) < x) {
 70                             G[i + N].push_back(j);
 71                             G[j + N].push_back(i);
 72                     }
 73 
 74             }
 75        }
 76 
 77        scc();
 78        for(int i = 1; i <= N; ++i) if(cmp[i] == cmp[i + N]) return false;
 79        return true;
 80 }
 81 
 82 void solve() {
 83         int l = 0,r = 0;
 84         for(int i = 1; i <= N; ++i) {
 85                 r = max(r,E[i]);
 86                 r = max(r,L[i]);
 87         }
 88 
 89         while(l < r) {
 90                 int mid = (l + r + 1) / 2;
 91                 if(check(mid)) l = mid;
 92                 else r = mid - 1;
 93         }
 94 
 95         printf("%d\n",l);
 96 
 97 }
 98 
 99 int main()
100 {
101     //freopen("sw.in","r",stdin);
102     while(~scanf("%d",&N)) {
103             for(int i = 1; i <= N; ++i) {
104                     scanf("%d%d",&E[i],&L[i]);
105             }
106 
107             solve();
108     }
109     //cout << "Hello world!" << endl;
110     return 0;
111 }