首页 > 代码库 > hdu 5868 2016 ACM/ICPC Asia Regional Dalian Online 1001 (burnside引理 polya定理）
hdu 5868 2016 ACM/ICPC Asia Regional Dalian Online 1001 (burnside引理 polya定理）
Different Circle Permutation
Time Limit: 3000/1500 MS (Java/Others) Memory Limit: 262144/262144 K (Java/Others)
Total Submission(s): 208 Accepted Submission(s): 101
Problem Description
You may not know this but it‘s a fact that Xinghai Square is Asia‘s largest city square. It is located in Dalian and, of course, a landmark of the city. It‘s an ideal place for outing any time of the year. And now:
There are N children from a nearby primary school flying kites with a teacher. When they have a rest at noon, part of them (maybe none) sit around the circle flower beds. The angle between any two of them relative to the center of the circle is always a multiple of 2πN but always not 2πN.
Now, the teacher raises a question: How many different ways there are to arrange students sitting around the flower beds according to the rule stated above. To simplify the problem, every student is seen as the same. And to make the answer looks not so great, the teacher adds another specification: two ways are considered the same if they coincide after rotating.
There are N children from a nearby primary school flying kites with a teacher. When they have a rest at noon, part of them (maybe none) sit around the circle flower beds. The angle between any two of them relative to the center of the circle is always a multiple of 2πN but always not 2πN.
Now, the teacher raises a question: How many different ways there are to arrange students sitting around the flower beds according to the rule stated above. To simplify the problem, every student is seen as the same. And to make the answer looks not so great, the teacher adds another specification: two ways are considered the same if they coincide after rotating.
Input
There are T tests (T≤50). Each test contains one integer N. 1≤N≤1000000000 (109). Process till the end of input.
Output
For each test, output the answer mod 1000000007 (109+7) in one line.
Sample Input
4710
Sample Output
3515
Source
2016 ACM/ICPC Asia Regional Dalian Online
【传送门】
该题题意：对成环的n个点染黑白两色，其中黑色不能相邻，请问在考虑旋转同构的情况下有几种不一样的方案。
首先不考虑旋转。
对于一个不考虑旋转的f(n),f(n)=f(n-1)+f(n-2)。
对于n=1要特殊判断 因为n=1有两种情况，只涂黑和白，只涂黑不符合上述情况可读入1后直接输出2。
因此f(1）=1，f(2)=3。
我们可以用矩阵快速幂快速算出f（n）。
显然的。对于n个点的环
①可由n-1个点的环在某个固定位置插入0来生成。该位置两边的情况为00,01,10。插入后为000，001,100。（另n-1由n-2的同样操作生成则有 0000,0001,1000，为了与情况②对应故列出）
②可由n-2个点的环在某个固定位置插入01或10来生成。该位置两边的情况为00，01,10。插入后为0100,0010,0101,1010。
至此所有情况已经考虑到了。(0000,0001,1000，0100,0010,0101,1010)
接下来考虑同构。
对于没有约束条件的n个点的环，显然由burnside引理可得方案数$g(n)=frac{1}{n}sum_{i=1}^{n} 2^{gcd(i,j)}$
因此可得（有点难理解，你把他理解成每个循环相邻在一起的几个点要符合黑点不相邻）$g(n)=frac{1}{n}sum_{i=1}^{n}f(gcd(i,j))$
g(n)=
即$g(n)=frac{1}{n}sum_{d|n}^{} \varphi(frac{n}{d})f(d)$
g(n) 
以下为代码：
1 #include<cstdio> 2 #include<iostream> 3 #include<cstring> 4 #include<algorithm> 5 #include<cmath> 6 #define clr(x) memset(x,0,sizeof(x)) 7 #define mod 1000000007 8 #define LL long long 9 using namespace std; 10 int inf[40010]; 11 int prime[10000]; 12 int mart1[2][2]; 13 int mart2[2][2]; 14 int mart3[2][2]; 15 void is_prime(); 16 int eular(int x); 17 void exgcd(int a,int b,int &x,int &y); 18 void quickmul(int x); 19 int fu(int x); 20 int main() 21 { 22 int n; 23 int xi,yi; 24 int ans; 25 is_prime(); 26 while(scanf("%d",&n)!=EOF) 27 { 28 ans=0; 29 if(n==1) 30 { 31 printf("2\n"); 32 continue; 33 } 34 for(int i=1;i*i<=n;i++) 35 { 36 if(i*i==n) 37 ans=(int)(((LL)ans+(LL)eular(n/i)*(LL)fu(i))%mod); 38 else if(n%i==0) 39 ans=(int)(((LL)ans+((LL)eular(n/i)*(LL)fu(i))%mod+((LL)eular(i)*(LL)fu(n/i))%mod)%mod); 40 } 41 exgcd(n,mod,xi,yi); 42 xi=(xi%mod+mod)%mod; 43 ans=(int)((((LL)ans*(LL)xi)%mod+mod)%mod); 44 printf("%d\n",ans); 45 } 46 } 47 void exgcd(int a,int b,int &x,int &y) 48 { 49 if(b==0) 50 { 51 x=1; 52 y=0; 53 return ; 54 } 55 exgcd(b,a%b,y,x); 56 y-=x*(a/b); 57 return ; 58 } 59 void is_prime() 60 { 61 clr(inf); 62 clr(prime); 63 inf[1]=inf[0]==1; 64 int tot=0; 65 for(int i=2;i<40000;i++) 66 { 67 if(!inf[i]) prime[tot++]=i; 68 for(int j=0;j<tot;j++) 69 { 70 if(i*prime[j]>40000) break; 71 inf[i*prime[j]]=1; 72 if(i%prime[j]==0) break; 73 } 74 } 75 return ; 76 } 77 int eular(int x) 78 { 79 int ans=x; 80 for(int j=0;prime[j]*prime[j]<=x;j++) 81 if(x%prime[j]==0) 82 { 83 ans-=ans/prime[j]; 84 while(x%prime[j]==0) 85 x/=prime[j]; 86 } 87 if(x>1) ans-=ans/x; 88 return ans; 89 } 90 int fu(int x) 91 { 92 if(x==1) return 1; 93 if(x==2) return 3; 94 clr(mart1); 95 clr(mart2); 96 clr(mart3); 97 mart1[1][1]=mart1[1][0]=mart1[0][1]=mart2[1][1]=mart2[0][0]=1; 98 quickmul(x-2); 99 return (int)(((LL)mart2[1][0]*1+(LL)mart2[1][1]*3)%mod);100 }101 void quickmul(int x)102 {103 int d;104 while(x)105 {106 if(x&1)107 {108 for(int i=0;i<2;i++)109 for(int j=0;j<2;j++)110 {111 d=0;112 for(int k=0;k<2;k++)113 d=(int)(((LL)d+((LL)mart2[i][k]*(LL)mart1[k][j])%mod)%mod);114 mart3[i][j]=d;115 }116 for(int i=0;i<2;i++)117 for(int j=0;j<2;j++)118 mart2[i][j]=mart3[i][j];119 }120 x>>=1;121 for(int i=0;i<2;i++)122 for(int j=0;j<2;j++)123 {124 d=0;125 for(int k=0;k<2;k++)126 d=(int)(((LL)d+((LL)mart1[i][k]*(LL)mart1[k][j])%mod)%mod);127 mart3[i][j]=d;128 }129 for(int i=0;i<2;i++)130 for(int j=0;j<2;j++)131 mart1[i][j]=mart3[i][j];132 }133 return ;134 }
hdu 5868 2016 ACM/ICPC Asia Regional Dalian Online 1001 (burnside引理 polya定理）
声明：以上内容来自用户投稿及互联网公开渠道收集整理发布，本网站不拥有所有权，未作人工编辑处理，也不承担相关法律责任，若内容有误或涉及侵权可进行投诉： 投诉/举报 工作人员会在5个工作日内联系你，一经查实，本站将立刻删除涉嫌侵权内容。