首页 > 代码库 > ubuntu下使用qemu-system-arm模拟arm环境
ubuntu下使用qemu-system-arm模拟arm环境
转载请注明原文出处，http://www.cnblogs.com/flyingcloude/p/6992396.html
最近由于学习需要，开始搭建嵌入式开发环境，但苦于硬件平台还没有弄好，故先在ubuntu环境下进行模拟。
以下方法将在ubuntu10.10主机上，利用qemu-system-arm安装一个arm11的操作系统。系统采用nfs方式挂载文件系统，可以用来模拟arm11的运行环境。
安装qemu-system-arm
（qemu的使用情况在http://www.cnblogs.com/flyingcloude/archive/2012/10/18/2730052.html介绍过了）
sudo add-apt-repository ppa:linaro-maintainers/tools sudo apt-get update sudo apt-get install qemu-system
安装好后，可以执行以下命令查看版本
qemu-system-arm --version
编译arm11内核
1、创建文件夹~/arm/kernel,并切换工作目录
mkdir ~/arm mkdir ~/arm/kernel cd ~/arm/kernel
2、下载EABI的TAR包
wget https://sourcery.mentor.com/sgpp/lite/arm/portal/package8734/public/arm-none-eabi/arm-2011.03-42-arm-none-eabi-i686-pc-linux-gnu.tar.bz2tar xjvf arm-2011.03-42-arm-none-eabi-i686-pc-linux-gnu.tar.bz2
3、下载、解压，为内核打上armv6支持的补丁
wget http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.0.4.tar.bz2tar -xvf linux-3.0.4.tar.bz2wget http://thoronir.net/raspi-dev/linux-arm.patchpatch -p1 -d linux-3.0.4/ < linux-arm.patch
4、设置内核编译选项
先安装ncurses
sudo apt-get install libncurses5-dev
cd linux-3.0.4make ARCH=arm versatile_defconfigmake ARCH=arm menuconfig
General Setup —>Cross-compiler tool prefix(We need to enter the path of the toolchain followed by ‘/bin/arm-none-eabi-’)
在我的电脑上是/usr/local/arm-2011.03/bin/arm-none-eabi-
System Type —> [*] Support ARM V6 processor[*] ARM errata: Invalidation of the Instruction Cache operation can fail
Kernel Features —> [*] Use ARM EABI to compile the kernel[*] Allow old ABI binaries to run with this kernel
Bus Support —> [*] PCI Support
Device Drivers —>SCSI Device Support —> [*] SCSI Device Support[*] SCSI Disk Support[*] SCSI CDROM support[*] SCSI low-lever drivers —>[*] SYM53C8XX Version 2 SCSI supportDevice Drivers —>Generic Driver Options—> [*] Maintain a devtmpfs filesystem to mount at /dev[*] Automount devtmpfs at /dev, after the kernel mounted the rootDevice Drivers —>Input device support—> [*] Event interfaceDevice Drivers —> [*] Real Time Clock ->
File systems —>Pseudo filesystems—> [*] Virtual memory file system support (former shm fs)
5、编译内核
make ARCH=arm
制作文件系统
1、新建文件系统目标并下载文件
cd ~/armmkdir debian_armel_squeezesudo debootstrap --foreign --arch armel squeeze debian_armel_squeeze http://ftp.tw.debian.org/debian
如果debootstrap没有安装的话，先进行安装
sudo apt-get install debootstrap
2、安装内核模块
cd linux-3.0.4sudo make ARCH=arm INSTALL_MOD_PATH=../debian_armel_squeeze modules_install
3、复制zImage
cd ~/armcp kernel/linux-3.0.4/arch/arm/boot/zImage .
配置NFS服务
1、如果没有安装NFS，先安装NFS软件包
sudo apt-get install nfs-kernel-server nfs-common
2、添加服务路径、在配置文件中加入一行
/home/ubuntu/arm/debian_armel_squeeze *(rw,sync,no_root_squash)
3、保存并重启nfs服务
sudo service nfs-kernel-server restart
网络配置
配置网络后,主机ubuntu和虚拟的arm11系统就在同一网段,以bridge方式连接.如果您的计算机是在路由器下面,配置网络完成之后,虚拟机arm11系统和ubuntu均能访问外网.
1、打开TUN/TAP选项
1、查看选项是否已经打开
grep CONFIG_TUN= /boot/config-2.6.35-32-generic
2、查看/dev/net/tun是否存在，如果不存在，可以创建它
mknod /dev/net/tun c 10 200
2、安装桥接工具
sudo apt-get install bridge-utils
3、初始化arm11系统
1、初始化网络
sudo brctl addbr br0sudo ifconfig eth0 0.0.0.0 promisc upsudo brctl addif br0 eth0sudo dhclient br0sudo iptables -F FORWARD
2、启动arm11系统
cd ~/armdd if=/dev/zero of=rootfs.ext2 count=6Mmkfs.ext2 rootfs.ext2mkdir mntsudo mount -o loop rootfs.ext2 mntsudo cp debian_armel_squeeze/* mnt -asudo umount mnt
sudo qemu-system-arm -M versatilepb -cpu arm1176 -m 256 -hda rootfs.ext2 -kernel zImage -append "root=/dev/sda rw init=/bin/bash" -serial stdio
系统启动成功后，出现shell界面，运行以下命令
mount /proc /proc -t /proc ./debootstrap/debootstrap --second-stage
设置主机名和密码
printf "auto eth0\niface eth0 inet dhcp\n" >> etc/network/interfaces echo "arm-debian" > /etc/hostname passwd
到此，系统已经完成，停止qemu重新启动系统
sudo qemu-system-arm -M versatilepb -cpu arm1176 -m 256 -hda rootfs.ext2 -kernel zImage -append "root=/dev/sda" -serial stdio
参考：http://www.cnx-software.com/2011/10/18/raspberry-pi-emulator-in-ubuntu-with-qemu/
转载请注明原文出处，http://www.cnblogs.com/flyingcloude/p/6992396.html
ubuntu下使用qemu-system-arm模拟arm环境