首页 > 代码库 > POJ 1502 MPI Maelstrom [最短路 Dijkstra]
POJ 1502 MPI Maelstrom [最短路 Dijkstra]
传送门
MPI Maelstrom
| Time Limit: 1000MS | Memory Limit: 10000K | |
| Total Submissions: 5711 | Accepted: 3552 |
Description
BIT has recently taken delivery of their new supercomputer, a 32 processor Apollo Odyssey distributed shared memory machine with a hierarchical communication subsystem. Valentine McKee‘s research advisor, Jack Swigert, has asked her to benchmark the new system.
``Since the Apollo is a distributed shared memory machine, memory access and communication times are not uniform,‘‘ Valentine told Swigert. ``Communication is fast between processors that share the same memory subsystem, but it is slower between processors that are not on the same subsystem. Communication between the Apollo and machines in our lab is slower yet.‘‘
``How is Apollo‘s port of the Message Passing Interface (MPI) working out?‘‘ Swigert asked.
``Not so well,‘‘ Valentine replied. ``To do a broadcast of a message from one processor to all the other n-1 processors, they just do a sequence of n-1 sends. That really serializes things and kills the performance.‘‘
``Is there anything you can do to fix that?‘‘
``Yes,‘‘ smiled Valentine. ``There is. Once the first processor has sent the message to another, those two can then send messages to two other hosts at the same time. Then there will be four hosts that can send, and so on.‘‘
``Ah, so you can do the broadcast as a binary tree!‘‘
``Not really a binary tree -- there are some particular features of our network that we should exploit. The interface cards we have allow each processor to simultaneously send messages to any number of the other processors connected to it. However, the messages don‘t necessarily arrive at the destinations at the same time -- there is a communication cost involved. In general, we need to take into account the communication costs for each link in our network topologies and plan accordingly to minimize the total time required to do a broadcast.‘‘
``Since the Apollo is a distributed shared memory machine, memory access and communication times are not uniform,‘‘ Valentine told Swigert. ``Communication is fast between processors that share the same memory subsystem, but it is slower between processors that are not on the same subsystem. Communication between the Apollo and machines in our lab is slower yet.‘‘
``How is Apollo‘s port of the Message Passing Interface (MPI) working out?‘‘ Swigert asked.
``Not so well,‘‘ Valentine replied. ``To do a broadcast of a message from one processor to all the other n-1 processors, they just do a sequence of n-1 sends. That really serializes things and kills the performance.‘‘
``Is there anything you can do to fix that?‘‘
``Yes,‘‘ smiled Valentine. ``There is. Once the first processor has sent the message to another, those two can then send messages to two other hosts at the same time. Then there will be four hosts that can send, and so on.‘‘
``Ah, so you can do the broadcast as a binary tree!‘‘
``Not really a binary tree -- there are some particular features of our network that we should exploit. The interface cards we have allow each processor to simultaneously send messages to any number of the other processors connected to it. However, the messages don‘t necessarily arrive at the destinations at the same time -- there is a communication cost involved. In general, we need to take into account the communication costs for each link in our network topologies and plan accordingly to minimize the total time required to do a broadcast.‘‘
Input
The input will describe the topology of a network connecting n processors. The first line of the input will be n, the number of processors, such that 1 <= n <= 100.
The rest of the input defines an adjacency matrix, A. The adjacency matrix is square and of size n x n. Each of its entries will be either an integer or the character x. The value of A(i,j) indicates the expense of sending a message directly from node i to node j. A value of x for A(i,j) indicates that a message cannot be sent directly from node i to node j.
Note that for a node to send a message to itself does not require network communication, so A(i,i) = 0 for 1 <= i <= n. Also, you may assume that the network is undirected (messages can go in either direction with equal overhead), so that A(i,j) = A(j,i). Thus only the entries on the (strictly) lower triangular portion of A will be supplied.
The input to your program will be the lower triangular section of A. That is, the second line of input will contain one entry, A(2,1). The next line will contain two entries, A(3,1) and A(3,2), and so on.
The rest of the input defines an adjacency matrix, A. The adjacency matrix is square and of size n x n. Each of its entries will be either an integer or the character x. The value of A(i,j) indicates the expense of sending a message directly from node i to node j. A value of x for A(i,j) indicates that a message cannot be sent directly from node i to node j.
Note that for a node to send a message to itself does not require network communication, so A(i,i) = 0 for 1 <= i <= n. Also, you may assume that the network is undirected (messages can go in either direction with equal overhead), so that A(i,j) = A(j,i). Thus only the entries on the (strictly) lower triangular portion of A will be supplied.
The input to your program will be the lower triangular section of A. That is, the second line of input will contain one entry, A(2,1). The next line will contain two entries, A(3,1) and A(3,2), and so on.
Output
Your program should output the minimum communication time required to broadcast a message from the first processor to all the other processors.
Sample Input
55030 5100 20 5010 x x 10
Sample Output
35
Source
East Central North America 1996
吼吼，第一个Dijkstra程序~~~
1 #include<iostream> 2 #include<cstring> 3 #include<cstdlib> 4 #include<cstdio> 5 #include<algorithm> 6 #include<cmath> 7 #include<queue> 8 #include<map> 9 #include<set> 10 #include<stack> 11 #include<string> 12 13 #define N 105 14 #define M 10 15 #define mod 1000000007 16 //#define p 10000007 17 #define mod2 1000000000 18 #define ll long long 19 #define LL long long 20 #define eps 1e-9 21 #define inf 0x3fffffff 22 #define maxi(a,b) (a)>(b)? (a) : (b) 23 #define mini(a,b) (a)<(b)? (a) : (b) 24 25 using namespace std; 26 27 int ans; 28 int v[N]; 29 int d[N][N]; 30 int vis[N]; 31 int n; 32 33 void ini() 34 { 35 char s[100]; 36 ans=0; 37 memset(vis,0,sizeof(vis)); 38 int i,j; 39 for(i=1;i<=n;i++) d[i][i]=0; 40 for(i=2;i<=n;i++){ 41 for(j=1;j<i;j++){ 42 scanf("%s",s); 43 if(s[0]!=‘x‘){ 44 sscanf(s,"%d",&d[i][j]); 45 d[j][i]=d[i][j]; 46 } 47 else{ 48 d[i][j]=d[j][i]=inf; 49 } 50 } 51 v[i]=d[i][1]; 52 } 53 } 54 55 void dijkstra() 56 { 57 int i,j; 58 int u; 59 int mindist; 60 vis[1]=1; 61 v[1]=0; 62 for(i=2;i<=n;i++){ 63 mindist=inf; 64 for(j=2;j<=n;j++){ 65 if(vis[j]==1) continue; 66 if(v[j]<mindist){ 67 u=j; 68 mindist=v[j]; 69 } 70 } 71 vis[u]=1; 72 for(j=2;j<=n;j++){ 73 if(vis[j]==1) continue; 74 if(d[j][u]==inf) continue; 75 v[j]=min(v[j],v[u]+d[j][u]); 76 } 77 } 78 } 79 80 void solve() 81 { 82 dijkstra(); 83 int i; 84 for(i=2;i<=n;i++){ 85 ans=max(ans,v[i]); 86 } 87 } 88 89 void out() 90 { 91 printf("%d\n",ans); 92 } 93 94 int main() 95 { 96 //freopen("data.in","r",stdin); 97 // freopen("data.out","w",stdout); 98 //scanf("%d",&T); 99 //for(int ccnt=1;ccnt<=T;ccnt++)100 //while(T--)101 while(scanf("%d",&n)!=EOF)102 {103 ini();104 solve();105 out();106 }107 108 return 0;109 }
POJ 1502 MPI Maelstrom [最短路 Dijkstra]
声明：以上内容来自用户投稿及互联网公开渠道收集整理发布，本网站不拥有所有权，未作人工编辑处理，也不承担相关法律责任，若内容有误或涉及侵权可进行投诉： 投诉/举报 工作人员会在5个工作日内联系你，一经查实，本站将立刻删除涉嫌侵权内容。