1 ## Refer to http://caffe.berkeleyvision.org/installation.html
  2 # Contributions simplifying and improving our build system are welcome!
  3 
  4 # cuDNN acceleration switch (uncomment to build with cuDNN).
  5 USE_CUDNN := 1
  6 
  7 # CPU-only switch (uncomment to build without GPU support).
  8 # CPU_ONLY := 1
  9 
 10 # uncomment to disable IO dependencies and corresponding data layers
 11 # USE_OPENCV := 0
 12 # USE_LEVELDB := 0
 13 # USE_LMDB := 0
 14 
 15 # uncomment to allow MDB_NOLOCK when reading LMDB files (only if necessary)
 16 #    You should not set this flag if you will be reading LMDBs with any
 17 #    possibility of simultaneous read and write
 18 # ALLOW_LMDB_NOLOCK := 1
 19 
 20 # Uncomment if you‘re using OpenCV 3
 21 # OPENCV_VERSION := 3
 22 
 23 # To customize your choice of compiler, uncomment and set the following.
 24 # N.B. the default for Linux is g++ and the default for OSX is clang++
 25 # CUSTOM_CXX := g++
 26 
 27 # CUDA directory contains bin/ and lib/ directories that we need.
 28 CUDA_DIR := /usr/local/cuda
 29 # On Ubuntu 14.04, if cuda tools are installed via
 30 # "sudo apt-get install nvidia-cuda-toolkit" then use this instead:
 31 # CUDA_DIR := /usr
 32 
 33 # CUDA architecture setting: going with all of them.
 34 # For CUDA < 6.0, comment the *_50 through *_61 lines for compatibility.
 35 # For CUDA < 8.0, comment the *_60 and *_61 lines for compatibility.
 36 CUDA_ARCH := -gencode arch=compute_20,code=sm_20  37         -gencode arch=compute_20,code=sm_21  38         -gencode arch=compute_30,code=sm_30  39         -gencode arch=compute_35,code=sm_35  40         -gencode arch=compute_50,code=sm_50  41         -gencode arch=compute_52,code=sm_52  42         -gencode arch=compute_60,code=sm_60  43         -gencode arch=compute_61,code=sm_61  44         -gencode arch=compute_61,code=compute_61
 45 
 46 # BLAS choice:
 47 # atlas for ATLAS (default)
 48 # mkl for MKL
 49 # open for OpenBlas
 50 BLAS := atlas
 51 # Custom (MKL/ATLAS/OpenBLAS) include and lib directories.
 52 # Leave commented to accept the defaults for your choice of BLAS
 53 # (which should work)!
 54 # BLAS_INCLUDE := /path/to/your/blas
 55 # BLAS_LIB := /path/to/your/blas
 56 
 57 # Homebrew puts openblas in a directory that is not on the standard search path
 58 # BLAS_INCLUDE := $(shell brew --prefix openblas)/include
 59 # BLAS_LIB := $(shell brew --prefix openblas)/lib
 60 
 61 # This is required only if you will compile the matlab interface.
 62 # MATLAB directory should contain the mex binary in /bin.
 63 # MATLAB_DIR := /usr/local
 64 # MATLAB_DIR := /Applications/MATLAB_R2012b.app
 65 
 66 # NOTE: this is required only if you will compile the python interface.
 67 # We need to be able to find Python.h and numpy/arrayobject.h.
 68 # PYTHON_INCLUDE := /usr/include/python2.7  69 #        /usr/lib/python2.7/dist-packages/numpy/core/include
 70 # Anaconda Python distribution is quite popular. Include path:
 71 # Verify anaconda location, sometimes it‘s in root.
 72  ANACONDA_HOME := /home/ipc/anaconda3
 73 # PYTHON_INCLUDE := $(ANACONDA_HOME)/include  74 #         $(ANACONDA_HOME)/include/python3.6m  75 #         $(ANACONDA_HOME)/lib/python3.6/site-packages/numpy/core/include
 76 # 关键点1：根据自己的情况设置好ANACONDA的路径

 77 # Uncomment to use Python 3 (default is Python 2)
 78 PYTHON_LIBRARIES := boost_python3 python3.6m
 79 PYTHON_INCLUDE := $(ANACONDA_HOME)/include $(ANACONDA_HOME)/include/python3.6m $(ANACONDA_HOME)/lib/python3.6/site-packages/numpy/core/include
 80 # 关键点2：需要注意其中的版本号，原始文件是3.5的，但是我的anaconda是3.6的，因此如果直接uncomment，就会出现问题，需要根据自己的情况设置好

 81 # We need to be able to find libpythonX.X.so or .dylib.
 82 # PYTHON_LIB := /usr/lib
 83 PYTHON_LIB := $(ANACONDA_HOME)/lib
 84 
 85 # Homebrew installs numpy in a non standard path (keg only)
 86 # PYTHON_INCLUDE += $(dir $(shell python -c ‘import numpy.core; print(numpy.core.__file__)‘))/include
 87 # PYTHON_LIB += $(shell brew --prefix numpy)/lib
 88 
 89 # Uncomment to support layers written in Python (will link against Python libs)
 90 WITH_PYTHON_LAYER := 1
 91 
 92 # Whatever else you find you need goes here.
 93 INCLUDE_DIRS := $(PYTHON_INCLUDE) /usr/local/include /usr/lib/x86_64-linux-gnu/hdf5/serial/include /usr/local/cuda/include
 94 LIBRARY_DIRS := $(PYTHON_LIB) /usr/local/lib /usr/lib /usr/lib/x86_64-linux-gnu/hdf5/serial /usr/local/cuda/lib64
 95 
 96 # If Homebrew is installed at a non standard location (for example your home directory) and you use it for general dependencies
 97 # INCLUDE_DIRS += $(shell brew --prefix)/include
 98 # LIBRARY_DIRS += $(shell brew --prefix)/lib
 99 
100 # NCCL acceleration switch (uncomment to build with NCCL)
101 # https://github.com/NVIDIA/nccl (last tested version: v1.2.3-1+cuda8.0)
102 # USE_NCCL := 1
103 
104 # Uncomment to use `pkg-config` to specify OpenCV library paths.
105 # (Usually not necessary -- OpenCV libraries are normally installed in one of the above $LIBRARY_DIRS.)
106 # USE_PKG_CONFIG := 1
107 
108 # N.B. both build and distribute dirs are cleared on `make clean`
109 BUILD_DIR := build
110 DISTRIBUTE_DIR := distribute
111 
112 # Uncomment for debugging. Does not work on OSX due to https://github.com/BVLC/caffe/issues/171
113 # DEBUG := 1
114 
115 # The ID of the GPU that ‘make runtest‘ will use to run unit tests.
116 TEST_GPUID := 0
117 
118 # enable pretty build (comment to see full commands)
119 Q ?= @