/*********************************************************************** *                     I.MX6 SHT20 Linux 驱动移植  * 说明： *     本来打算使用SHT10来做湿度检测，发现其并不是I2C接口，当然也使用 * GPIO能获取到相关数据了，不过由于不小心将其烧坏了，所以换成SHT20。 * *                                     2016-10-10 深圳 南山平山村 曾剑锋 **********************************************************************/一、参考驱动：    Android_Native_Service_SHT20Demo        https://github.com/HowardLin/Android_Native_Service_SHT20Demo/blob/master/SHT20_Module_1.2/sht20_driver/sht20.c#L126二、驱动修改：    static s32 sht20_get_id(struct i2c_client *client, u8 serial[8])    {        s32 result;        u8 serialA[8];        u8 serialB[6];            u8 command1[2] = {0xFA, 0x0F}; /* Read from memory location 1 */        u8 command2[2] = {0xFC, 0xC9}; /* Read from memory location 2 */            struct i2c_msg get_serial_number_msg1[2] = {            {                .addr = client->addr,                .flags = ~I2C_M_RD,                .len = 2,                .buf = command1,            },            {                .addr = client->addr,                .flags = I2C_M_RD,                .len = 8,                .buf = serialA,            },        };        result = i2c_transfer(client->adapter, get_serial_number_msg1, 2);        struct i2c_msg get_serial_number_msg2[2] = {            {                .addr = client->addr,                .flags = ~I2C_M_RD,                .len = 2,                .buf = command2,            },            {                .addr = client->addr,                .flags = I2C_M_RD,                .len = 6,                .buf = serialB,            }        };        result = i2c_transfer(client->adapter, get_serial_number_msg2, 2);            // printk(KERN_INFO "%x %x %x %x %x %x %x %x", serialB[3], serialB[4], serialA[0], serialA[2], serialA[4], serialA[6], serialB[0], serialB[1]);                serial[0] = serialB[3];        serial[1] = serialB[4];        serial[2] = serialA[0];        serial[3] = serialA[2];        serial[4] = serialA[4];        serial[5] = serialA[6];        serial[6] = serialB[0];        serial[7] = serialB[1];                return result;    }