首页 > 代码库 > docker-compose编写（英文）

docker-compose编写（英文）

2024-08-24 06:56:10 225人阅读

Compose file reference

The Compose file is a YAML file defining services, networks and volumes. The default path for a Compose file is./docker-compose.yml.

A service definition contains configuration which will be applied to each container started for that service, much like passing command-line parameters to docker run. Likewise, network and volume definitions are analogous to docker network create and docker volume create.

As with docker run, options specified in the Dockerfile (e.g., CMD, EXPOSE, VOLUME, ENV) are respected by default - you don’t need to specify them again in docker-compose.yml.

You can use environment variables in configuration values with a Bash-like ${VARIABLE} syntax - see variable substitution for full details.

Service configuration reference

Note: There are two versions of the Compose file format – version 1 (the legacy format, which does not support volumes or networks) and version 2 (the most up-to-date). For more information, see theVersioning section.

This section contains a list of all configuration options supported by a service definition.

build

Configuration options that are applied at build time.

build can be specified either as a string containing a path to the build context, or an object with the path specified under context and optionally dockerfile and args.

build: ./dir

build:
  context: ./dir
  dockerfile: Dockerfile-alternate
  args:
    buildno: 1

If you specify image as well as build, then Compose names the built image with the webapp and optional tagspecified in image:

build: ./dir
image: webapp:tag

This will result in an image named webapp and tagged tag, built from ./dir.

Note: In the version 1 file format, build is different in two ways:

Only the string form (build: .) is allowed - not the object form.

Using build together with image is not allowed. Attempting to do so results in an error.

context

Version 2 file format only. In version 1, just use build.

Either a path to a directory containing a Dockerfile, or a url to a git repository.

When the value supplied is a relative path, it is interpreted as relative to the location of the Compose file. This directory is also the build context that is sent to the Docker daemon.

Compose will build and tag it with a generated name, and use that image thereafter.

build:
  context: ./dir

dockerfile

Alternate Dockerfile.

Compose will use an alternate file to build with. A build path must also be specified.

build:
  context: .
  dockerfile: Dockerfile-alternate

Note: In the version 1 file format, dockerfile is different in two ways:
It appears alongside build, not as a sub-option:
build: .
dockerfile: Dockerfile-alternate
Using dockerfile together with image is not allowed. Attempting to do so results in an error.

args

Version 2 file format only.

Add build arguments, which are environment variables accessible only during the build process.

First, specify the arguments in your Dockerfile:

ARG buildno
ARG password

RUN echo "Build number: $buildno"
RUN script-requiring-password.sh "$password"

Then specify the arguments under the build key. You can pass either a mapping or a list:

build:
  context: .
  args:
    buildno: 1
    password: secret

build:
  context: .
  args:
    - buildno=1
    - password=secret

You can omit the value when specifying a build argument, in which case its value at build time is the value in the environment where Compose is running.

args:
  - buildno
  - password

Note: YAML boolean values (true, false, yes, no, on, off) must be enclosed in quotes, so that the parser interprets them as strings.

cap_add, cap_drop

Add or drop container capabilities. See man 7 capabilities for a full list.

cap_add:
  - ALL

cap_drop:
  - NET_ADMIN
  - SYS_ADMIN

command

Override the default command.

command: bundle exec thin -p 3000

The command can also be a list, in a manner similar to dockerfile:

command: [bundle, exec, thin, -p, 3000]

cgroup_parent

Specify an optional parent cgroup for the container.

cgroup_parent: m-executor-abcd

container_name

Specify a custom container name, rather than a generated default name.

container_name: my-web-container

Because Docker container names must be unique, you cannot scale a service beyond 1 container if you have specified a custom name. Attempting to do so results in an error.

devices

List of device mappings. Uses the same format as the --device docker client create option.

devices:
  - "/dev/ttyUSB0:/dev/ttyUSB0"

depends_on

Express dependency between services, which has two effects:

docker-compose up will start services in dependency order. In the following example, db and redis will be started before web.
docker-compose up SERVICE will automatically include SERVICE’s dependencies. In the following example,docker-compose up web will also create and start db and redis.

Simple example:

version: ‘2‘
services:
  web:
    build: .
    depends_on:
      - db
      - redis
  redis:
    image: redis
  db:
    image: postgres

Note: depends_on will not wait for db and redis to be “ready” before starting web - only until they have been started. If you need to wait for a service to be ready, see Controlling startup order for more on this problem and strategies for solving it.

dns

Custom DNS servers. Can be a single value or a list.

dns: 8.8.8.8
dns:
  - 8.8.8.8
  - 9.9.9.9

dns_search

Custom DNS search domains. Can be a single value or a list.

dns_search: example.com
dns_search:
  - dc1.example.com
  - dc2.example.com

tmpfs

Version 2 file format only.

Mount a temporary file system inside the container. Can be a single value or a list.

tmpfs: /run
tmpfs:
  - /run
  - /tmp

entrypoint

Override the default entrypoint.

entrypoint: /code/entrypoint.sh

The entrypoint can also be a list, in a manner similar to dockerfile:

entrypoint:
    - php
    - -d
    - zend_extension=/usr/local/lib/php/extensions/no-debug-non-zts-20100525/xdebug.so
    - -d
    - memory_limit=-1
    - vendor/bin/phpunit

env_file

Add environment variables from a file. Can be a single value or a list.

If you have specified a Compose file with docker-compose -f FILE, paths in env_file are relative to the directory that file is in.

Environment variables specified in environment override these values.

env_file: .env

env_file:
  - ./common.env
  - ./apps/web.env
  - /opt/secrets.env

Compose expects each line in an env file to be in VAR=VAL format. Lines beginning with # (i.e. comments) are ignored, as are blank lines.

# Set Rails/Rack environment
RACK_ENV=development

Note: If your service specifies a build option, variables defined in environment files will not be automatically visible during the build. Use the args sub-option of build to define build-time environment variables.

environment

Add environment variables. You can use either an array or a dictionary. Any boolean values; true, false, yes no, need to be enclosed in quotes to ensure they are not converted to True or False by the YML parser.

Environment variables with only a key are resolved to their values on the machine Compose is running on, which can be helpful for secret or host-specific values.

environment:
  RACK_ENV: development
  SHOW: ‘true‘
  SESSION_SECRET:

environment:
  - RACK_ENV=development
  - SHOW=true
  - SESSION_SECRET

Note: If your service specifies a build option, variables defined in environment will not be automatically visible during the build. Use the args sub-option of build to define build-time environment variables.

expose

Expose ports without publishing them to the host machine - they’ll only be accessible to linked services. Only the internal port can be specified.

expose:
 - "3000"
 - "8000"

extends

Extend another service, in the current file or another, optionally overriding configuration.

You can use extends on any service together with other configuration keys. The extends value must be a dictionary defined with a required service and an optional file key.

extends:
  file: common.yml
  service: webapp

The service the name of the service being extended, for example web or database. The file is the location of a Compose configuration file defining that service.

If you omit the file Compose looks for the service configuration in the current file. The file value can be an absolute or relative path. If you specify a relative path, Compose treats it as relative to the location of the current file.

You can extend a service that itself extends another. You can extend indefinitely. Compose does not support circular references and docker-compose returns an error if it encounters one.

For more on extends, see the the extends documentation.

external_links

Link to containers started outside this docker-compose.yml or even outside of Compose, especially for containers that provide shared or common services. external_links follow semantics similar to links when specifying both the container name and the link alias (CONTAINER:ALIAS).

external_links:
 - redis_1
 - project_db_1:mysql
 - project_db_1:postgresql

Note: If you’re using the version 2 file format, the externally-created containers must be connected to at least one of the same networks as the service which is linking to them.

extra_hosts

Add hostname mappings. Use the same values as the docker client --add-host parameter.

extra_hosts:
 - "somehost:162.242.195.82"
 - "otherhost:50.31.209.229"

An entry with the ip address and hostname will be created in /etc/hosts inside containers for this service, e.g:

162.242.195.82  somehost
50.31.209.229   otherhost

image

Specify the image to start the container from. Can either be a repository/tag or a partial image ID.

image: redis
image: ubuntu:14.04
image: tutum/influxdb
image: example-registry.com:4000/postgresql
image: a4bc65fd

If the image does not exist, Compose attempts to pull it, unless you have also specified build, in which case it builds it using the specified options and tags it with the specified tag.

Note: In the version 1 file format, using build together with image is not allowed. Attempting to do so results in an error.

labels

Add metadata to containers using Docker labels. You can use either an array or a dictionary.

It’s recommended that you use reverse-DNS notation to prevent your labels from conflicting with those used by other software.

labels:
  com.example.description: "Accounting webapp"
  com.example.department: "Finance"
  com.example.label-with-empty-value: ""

labels:
  - "com.example.description=Accounting webapp"
  - "com.example.department=Finance"
  - "com.example.label-with-empty-value"

links

Link to containers in another service. Either specify both the service name and a link alias (SERVICE:ALIAS), or just the service name.

web:
  links:
   - db
   - db:database
   - redis

Containers for the linked service will be reachable at a hostname identical to the alias, or the service name if no alias was specified.

Links also express dependency between services in the same way as depends_on, so they determine the order of service startup.

Note: If you define both links and networks, services with links between them must share at least one network in common in order to communicate.

logging

Version 2 file format only. In version 1, use log_driver and log_opt.

Logging configuration for the service.

logging:
  driver: syslog
  options:
    syslog-address: "tcp://192.168.0.42:123"

The driver name specifies a logging driver for the service’s containers, as with the --log-driver option for docker run (documented here).

The default value is json-file.

driver: "json-file"
driver: "syslog"
driver: "none"

Note: Only the json-file and journald drivers make the logs available directly from docker-compose up and docker-compose logs. Using any other driver will not print any logs.

Specify logging options for the logging driver with the options key, as with the --log-opt option for docker run.

Logging options are key-value pairs. An example of syslog options:

driver: "syslog"
options:
  syslog-address: "tcp://192.168.0.42:123"

log_driver

Version 1 file format only. In version 2, use logging.

Specify a log driver. The default is json-file.

log_driver: syslog

log_opt

Version 1 file format only. In version 2, use logging.

Specify logging options as key-value pairs. An example of syslog options:

log_opt:
  syslog-address: "tcp://192.168.0.42:123"

net

Version 1 file format only. In version 2, use network_mode.

Network mode. Use the same values as the docker client --net parameter. The container:... form can take a service name instead of a container name or id.

net: "bridge"
net: "host"
net: "none"
net: "container:[service name or container name/id]"

network_mode

Version 2 file format only. In version 1, use net.

Network mode. Use the same values as the docker client --net parameter, plus the special form service:[service name].

network_mode: "bridge"
network_mode: "host"
network_mode: "none"
network_mode: "service:[service name]"
network_mode: "container:[container name/id]"

networks

Version 2 file format only. In version 1, use net.

Networks to join, referencing entries under the top-level networks key.

services:
  some-service:
    networks:
     - some-network
     - other-network

aliases

Aliases (alternative hostnames) for this service on the network. Other containers on the same network can use either the service name or this alias to connect to one of the service’s containers.

Since aliases is network-scoped, the same service can have different aliases on different networks.

Note: A network-wide alias can be shared by multiple containers, and even by multiple services. If it is, then exactly which container the name will resolve to is not guaranteed.

The general format is shown here.

services:
  some-service:
    networks:
      some-network:
        aliases:
         - alias1
         - alias3
      other-network:
        aliases:
         - alias2

In the example below, three services are provided (web, worker, and db), along with two networks (new andlegacy). The db service is reachable at the hostname db or database on the new network, and at db or mysql on the legacy network.

version: ‘2‘

services:
  web:
    build: ./web
    networks:
      - new

  worker:
    build: ./worker
    networks:
    - legacy

  db:
    image: mysql
    networks:
      new:
        aliases:
          - database
      legacy:
        aliases:
          - mysql

networks:
  new:
  legacy:

ipv4_address, ipv6_address

Specify a static IP address for containers for this service when joining the network.

The corresponding network configuration in the top-level networks section must have an ipam block with subnet and gateway configurations covering each static address. If IPv6 addressing is desired, thecom.docker.network.enable_ipv6 driver option must be set to true.

An example:

version: ‘2‘

services:
  app:
    image: busybox
    command: ifconfig
    networks:
      app_net:
        ipv4_address: 172.16.238.10
        ipv6_address: 2001:3984:3989::10

networks:
  app_net:
    driver: bridge
    driver_opts:
      com.docker.network.enable_ipv6: "true"
    ipam:
      driver: default
      config:
      - subnet: 172.16.238.0/24
        gateway: 172.16.238.1
      - subnet: 2001:3984:3989::/64
        gateway: 2001:3984:3989::1

pid

pid: "host"

Sets the PID mode to the host PID mode. This turns on sharing between container and the host operating system the PID address space. Containers launched with this flag will be able to access and manipulate other containers in the bare-metal machine’s namespace and vise-versa.

ports

Expose ports. Either specify both ports (HOST:CONTAINER), or just the container port (a random host port will be chosen).

Note: When mapping ports in the HOST:CONTAINER format, you may experience erroneous results when using a container port lower than 60, because YAML will parse numbers in the format xx:yy as sexagesimal (base 60). For this reason, we recommend always explicitly specifying your port mappings as strings.

ports:
 - "3000"
 - "3000-3005"
 - "8000:8000"
 - "9090-9091:8080-8081"
 - "49100:22"
 - "127.0.0.1:8001:8001"
 - "127.0.0.1:5000-5010:5000-5010"

security_opt

Override the default labeling scheme for each container.

security_opt:
  - label:user:USER
  - label:role:ROLE

stop_signal

Sets an alternative signal to stop the container. By default stop uses SIGTERM. Setting an alternative signal usingstop_signal will cause stop to send that signal instead.

stop_signal: SIGUSR1

ulimits

Override the default ulimits for a container. You can either specify a single limit as an integer or soft/hard limits as a mapping.

ulimits:
  nproc: 65535
  nofile:
    soft: 20000
    hard: 40000

volumes, volume_driver

Mount paths or named volumes, optionally specifying a path on the host machine (HOST:CONTAINER), or an access mode (HOST:CONTAINER:ro). For version 2 files, named volumes need to be specified with the top-levelvolumes key. When using version 1, the Docker Engine will create the named volume automatically if it doesn’t exist.

You can mount a relative path on the host, which will expand relative to the directory of the Compose configuration file being used. Relative paths should always begin with . or ...

volumes:
  # Just specify a path and let the Engine create a volume
  - /var/lib/mysql

  # Specify an absolute path mapping
  - /opt/data:/var/lib/mysql

  # Path on the host, relative to the Compose file
  - ./cache:/tmp/cache

  # User-relative path
  - ~/configs:/etc/configs/:ro

  # Named volume
  - datavolume:/var/lib/mysql

If you do not use a host path, you may specify a volume_driver.

volume_driver: mydriver

Note that for version 2 files, this driver will not apply to named volumes (you should use the driver option whendeclaring the volume instead). For version 1, both named volumes and container volumes will use the specified driver.

Note: No path expansion will be done if you have also specified a volume_driver.

See Docker Volumes and Volume Plugins for more information.

volumes_from

Mount all of the volumes from another service or container, optionally specifying read-only access (ro) or read-write (rw). If no access level is specified, then read-write will be used.

volumes_from:
 - service_name
 - service_name:ro
 - container:container_name
 - container:container_name:rw

Note: The container:... formats are only supported in the version 2 file format. In version 1, you can use container names without marking them as such:
- service_name
- service_name:ro
- container_name
- container_name:rw

cpu_shares, cpu_quota, cpuset, domainname, hostname, ipc, mac_address, mem_limit, memswap_limit, privileged, read_only, restart, shm_size, stdin_open, tty, user, working_dir

Each of these is a single value, analogous to its docker run counterpart.

cpu_shares: 73
cpu_quota: 50000
cpuset: 0,1

user: postgresql
working_dir: /code

domainname: foo.com
hostname: foo
ipc: host
mac_address: 02:42:ac:11:65:43

mem_limit: 1000000000
memswap_limit: 2000000000
privileged: true

restart: always

read_only: true
shm_size: 64M
stdin_open: true
tty: true

Volume configuration reference

While it is possible to declare volumes on the fly as part of the service declaration, this section allows you to create named volumes that can be reused across multiple services (without relying on volumes_from), and are easily retrieved and inspected using the docker command line or API. See the docker volume subcommand documentation for more information.

driver

Specify which volume driver should be used for this volume. Defaults to local. The Docker Engine will return an error if the driver is not available.

 driver: foobar

driver_opts

Specify a list of options as key-value pairs to pass to the driver for this volume. Those options are driver-dependent - consult the driver’s documentation for more information. Optional.

 driver_opts:
   foo: "bar"
   baz: 1

external

If set to true, specifies that this volume has been created outside of Compose. docker-compose up will not attempt to create it, and will raise an error if it doesn’t exist.

external cannot be used in conjunction with other volume configuration keys (driver, driver_opts).

In the example below, instead of attempting to create a volume called [projectname]_data, Compose will look for an existing volume simply called data and mount it into the db service’s containers.

version: ‘2‘

services:
  db:
    image: postgres
    volumes:
      - data:/var/lib/postgresql/data

volumes:
  data:
    external: true

You can also specify the name of the volume separately from the name used to refer to it within the Compose file:

volumes:
  data:
    external:
      name: actual-name-of-volume

Network configuration reference

The top-level networks key lets you specify networks to be created. For a full explanation of Compose’s use of Docker networking features, see the Networking guide.

driver

Specify which driver should be used for this network.

The default driver depends on how the Docker Engine you’re using is configured, but in most instances it will bebridge on a single host and overlay on a Swarm.

The Docker Engine will return an error if the driver is not available.

driver: overlay

driver_opts

Specify a list of options as key-value pairs to pass to the driver for this network. Those options are driver-dependent - consult the driver’s documentation for more information. Optional.

  driver_opts:
    foo: "bar"
    baz: 1

ipam

Specify custom IPAM config. This is an object with several properties, each of which is optional:

driver: Custom IPAM driver, instead of the default.
config: A list with zero or more config blocks, each containing any of the following keys:
- subnet: Subnet in CIDR format that represents a network segment
- ip_range: Range of IPs from which to allocate container IPs
- gateway: IPv4 or IPv6 gateway for the master subnet
- aux_addresses: Auxiliary IPv4 or IPv6 addresses used by Network driver, as a mapping from hostname to IP

A full example:

ipam:
  driver: default
  config:
    - subnet: 172.28.0.0/16
      ip_range: 172.28.5.0/24
      gateway: 172.28.5.254
      aux_addresses:
        host1: 172.28.1.5
        host2: 172.28.1.6
        host3: 172.28.1.7

external

If set to true, specifies that this network has been created outside of Compose. docker-compose up will not attempt to create it, and will raise an error if it doesn’t exist.

external cannot be used in conjunction with other network configuration keys (driver, driver_opts, ipam).

In the example below, proxy is the gateway to the outside world. Instead of attempting to create a network called [projectname]_outside, Compose will look for an existing network simply called outside and connect the proxy service’s containers to it.

version: ‘2‘

services:
  proxy:
    build: ./proxy
    networks:
      - outside
      - default
  app:
    build: ./app
    networks:
      - default

networks:
  outside:
    external: true

You can also specify the name of the network separately from the name used to refer to it within the Compose file:

networks:
  outside:
    external:
      name: actual-name-of-network

Versioning

There are two versions of the Compose file format:

Version 1, the legacy format. This is specified by omitting a version key at the root of the YAML.
Version 2, the recommended format. This is specified with a version: ‘2‘ entry at the root of the YAML.

To move your project from version 1 to 2, see the Upgrading section.

Note: If you’re using multiple Compose files or extending services, each file must be of the same version - you cannot mix version 1 and 2 in a single project.

Several things differ depending on which version you use:

The structure and permitted configuration keys
The minimum Docker Engine version you must be running
Compose’s behaviour with regards to networking

These differences are explained below.

Version 1

Compose files that do not declare a version are considered “version 1”. In those files, all the services are declared at the root of the document.

Version 1 is supported by Compose up to 1.6.x. It will be deprecated in a future Compose release.

Version 1 files cannot declare named volumes, networks or build arguments.

Example:

web:
  build: .
  ports:
   - "5000:5000"
  volumes:
   - .:/code
  links:
   - redis
redis:
  image: redis

Version 2

Compose files using the version 2 syntax must indicate the version number at the root of the document. Allservices must be declared under the services key.

Version 2 files are supported by Compose 1.6.0+ and require a Docker Engine of version 1.10.0+.

Named volumes can be declared under the volumes key, and networks can be declared under the networkskey.

Simple example:

version: ‘2‘
services:
  web:
    build: .
    ports:
     - "5000:5000"
    volumes:
     - .:/code
  redis:
    image: redis

A more extended example, defining volumes and networks:

version: ‘2‘
services:
  web:
    build: .
    ports:
     - "5000:5000"
    volumes:
     - .:/code
    networks:
      - front-tier
      - back-tier
  redis:
    image: redis
    volumes:
      - redis-data:/var/lib/redis
    networks:
      - back-tier
volumes:
  redis-data:
    driver: local
networks:
  front-tier:
    driver: bridge
  back-tier:
    driver: bridge

Upgrading

In the majority of cases, moving from version 1 to 2 is a very simple process:

Indent the whole file by one level and put a services: key at the top.
Add a version: ‘2‘ line at the top of the file.

It’s more complicated if you’re using particular configuration features:

dockerfile: This now lives under the build key:

build:
  context: .
  dockerfile: Dockerfile-alternate

log_driver, log_opt: These now live under the logging key:

logging:
  driver: syslog
  options:
    syslog-address: "tcp://192.168.0.42:123"

links with environment variables: As documented in the environment variables reference, environment variables created by links have been deprecated for some time. In the new Docker network system, they have been removed. You should either connect directly to the appropriate hostname or set the relevant environment variable yourself, using the link hostname:
```
web:
  links:
    - db
  environment:
    - DB_PORT=tcp://db:5432
```
external_links: Compose uses Docker networks when running version 2 projects, so links behave slightly differently. In particular, two containers must be connected to at least one network in common in order to communicate, even if explicitly linked together.

Either connect the external container to your app’s default network, or connect both the external container and your service’s containers to an external network.

net: This is now replaced by network_mode:

net: host    ->  network_mode: host
net: bridge  ->  network_mode: bridge
net: none    ->  network_mode: none

If you’re using net: "container:[service name]", you must now use network_mode: "service:[service name]" instead.

net: "container:web"  ->  network_mode: "service:web"

If you’re using net: "container:[container name/id]", the value does not need to change.

net: "container:cont-name"  ->  network_mode: "container:cont-name"
net: "container:abc12345"   ->  network_mode: "container:abc12345"

volumes with named volumes: these must now be explicitly declared in a top-level volumes section of your Compose file. If a service mounts a named volume called data, you must declare a data volume in your top-level volumes section. The whole file might look like this:
```
version: ‘2‘
services:
  db:
    image: postgres
    volumes:
      - data:/var/lib/postgresql/data
volumes:
  data: {}
```
By default, Compose creates a volume whose name is prefixed with your project name. If you want it to just be called data, declare it as external:
```
volumes:
  data:
    external: true
```

Variable substitution

Your configuration options can contain environment variables. Compose uses the variable values from the shell environment in which docker-compose is run. For example, suppose the shell contains EXTERNAL_PORT=8000and you supply this configuration:

web:
  build: .
  ports:
    - "${EXTERNAL_PORT}:5000"

When you run docker-compose up with this configuration, Compose looks for the EXTERNAL_PORT environment variable in the shell and substitutes its value in. In this example, Compose resolves the port mapping to"8000:5000" before creating the web container.

If an environment variable is not set, Compose substitutes with an empty string. In the example above, ifEXTERNAL_PORT is not set, the value for the port mapping is :5000 (which is of course an invalid port mapping, and will result in an error when attempting to create the container).

Both $VARIABLE and ${VARIABLE} syntax are supported. Extended shell-style features, such as ${VARIABLE-default} and ${VARIABLE/foo/bar}, are not supported.

You can use a $$ (double-dollar sign) when your configuration needs a literal dollar sign. This also prevents Compose from interpolating a value, so a $$ allows you to refer to environment variables that you don’t want processed by Compose.

web:
  build: .
  command: "$$VAR_NOT_INTERPOLATED_BY_COMPOSE"

If you forget and use a single dollar sign ($), Compose interprets the value as an environment variable and will warn you:

The VAR_NOT_INTERPOLATED_BY_COMPOSE is not set. Substituting an empty string.

docker-compose编写（英文）

声明：以上内容来自用户投稿及互联网公开渠道收集整理发布，本网站不拥有所有权，未作人工编辑处理，也不承担相关法律责任，若内容有误或涉及侵权可进行投诉：投诉/举报工作人员会在5个工作日内联系你，一经查实，本站将立刻删除涉嫌侵权内容。

联系
我们

首页 > 代码库 > docker-compose编写（英文）

docker-compose编写（英文）

Compose file reference

Service configuration reference

build

context

dockerfile

args

cap_add, cap_drop

command

cgroup_parent

container_name

devices

depends_on

dns

dns_search

tmpfs

entrypoint

env_file

environment

expose

extends

external_links

extra_hosts

image

labels

links

logging

log_driver

log_opt

net

network_mode

networks

aliases

ipv4_address, ipv6_address

pid

ports

security_opt

stop_signal

ulimits

volumes, volume_driver

volumes_from

cpu_shares, cpu_quota, cpuset, domainname, hostname, ipc, mac_address, mem_limit, memswap_limit, privileged, read_only, restart, shm_size, stdin_open, tty, user, working_dir

Volume configuration reference

driver

driver_opts

external

Network configuration reference

driver

driver_opts

ipam

external

Versioning

Version 1

Version 2

Upgrading

Variable substitution

看完仍有疑问？有类似问题直接问程序猿