Introduction Often the construction market is one of the significant waste makers in Australia. The particular construction waste is usually defined as waste emanating from construction, demolition and renovation activities. Similarly, it Concrete Mixer may consist of surplus or damaged products and materials and concrete waste water ending from construction work. The conventional disposal method of construction waste was landfill. Nowadays, as a result of stringent waste disposal protocols and dwindling quantity of landfills obtainable within the country, the construction firms are forced to discover alternative techniques of managing construction waste. In essence, prudent and proper management of waste streams have been the concern. Thus, many construction contractors are looking for various practices and techniques to reduce construction waste such as 揷oncrete waste water?in the supply itself. This article is only taking a look at the way to manage concrete waste water throughout construction. Why is it important to handle Concrete Waste Water? ?Concrete waste water or fresh concrete or cement based mortar are extremely JS500 Concrete Mixer toxic to marine and plant life. ?Concrete waste water is very alkaline and has extremely high pH value around 12. Due to high alkalinity it can burn fish and plants in natural streams. A tiny quantity of concrete waste water cans hundreds of aquatic life such as plants. ?Australian Water High quality Guidelines recommend that fresh water pH ought to not be kept in between 6.5 and 9.0. Any adjustments beyond 0.5pH value either from lower or upper limit must be probed. ?Higher penalties (>Aus$1500) are enforced on pollution from concrete construction. Web site Preparation The actual management should make sure that all construction workers are totally aware of the compliance requirements and procedures below Environmental Management System/Plan such as waste disposal techniques obtainable. Provide Separate Wash-down Region ?Make it compulsory that all concrete mixer trucks should return to Prepared Mix Plant (RMP) premises for washing. ?Ensure that the concrete wash area (at RMP) is situated at the very least 20m from storm water drains, pits and inlets. ?Remove JS750 Concrete Mixer or scrape concrete from the gear and trucks just before washing. ?It is essential that the washing region is completely secured with plastic lining to capture cement slurry run-offs. Alternatively, supply temporary lined pits or removable containers. Waste Water Management and Disposal Operations ?Frequent inspections and controls must be carried out to check whether or not correct procedures (as per the Environmental Management Program) are adhered during construction.