首页 > 代码库 > keepalived实现LVS高可用

keepalived实现LVS高可用

前提:后端两个RS已经安装好了httpd,并且可以被正常访问到

规划:

Director1:

eth0,DIP:202.207.178.6

eth0:0,VIP:202.207.178.4

Director2:

eth0,DIP:202.207.178.7

eth0:0,VIP:202.207.178.4

RS1:

eth0,RIP:202.207.178.8

lo:0,VIP:202.207.178.4

RS2:

eth0,RIP:202.207.178.9

lo:0,VIP:202.207.178.4

一、配置DR模型(注意:RS1和RS2上的网卡别名地址必须在配置好arp_ignore和arp_announce之后才可配置,为避免影响,应关闭防火墙和SELinux)

1、按上述IP地址规划在相应的网卡上配置相应的IP地址

2、配置RS1和RS2对arp的请求响应,以及其对应VIP

RS1:

# sysctl -w net.ipv4.conf.eth0.arp_announce=2

# sysctl -w net.ipv4.conf.all.arp_announce=2

# echo 1 > /proc/sys/net/ipv4/conf/eth0/arp_ignore

# echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore

#ifconfig lo:0 202.207.178.4 broadcast 202.207.178.4 netmask 

         255.255.255.255

RS2:

# echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce 

# echo 2 > /proc/sys/net/ipv4/conf/eth0/arp_announce 

# echo 1 > /proc/sys/net/ipv4/conf/eth0/arp_ignore 

# echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore 

# ifconfig lo:0 202.207.178.4 broadcast 202.207.178.4 netmask 

         255.255.255.255

3、为了使响应报文的源地址为VIP,添加一条路由

RS1:

# route add -host 202.207.178.4 dev lo:0

RS2:

# route add -host 202.207.178.4 dev lo:0

4、在前端两个Director上分别定义规则

# ipvsadm -A -t 202.207.178.4:80 -s rr

# ipvsadm -a -t 202.207.178.4:80 -r 202.207.178.8 -g

# ipvsadm -a -t 202.207.178.4:80 -r 202.207.178.9 -g

二、安装配置keepalived,并对此系统进行测试!

Director1:

1、安装keepalived

# tar xf keepalived-1.2.1.tar.gz

# cd keepalived-1.2.1

# ./configure --with-kernel-dir=/usr/src/kernels/2.6.32-642.11.1.el6.i686/

# make && make install

注意:

可能需要安装此包:

# yum install popt-devel

发现/usr/src/kernels/为空,需要安装内核源码

# yum install kernel-devel

2、配置keepalived

1)设置一个变量

# DIR=/usr/local/

2)执行如下语句,将keepalived的配置文件放置在/etc下相关目录中

# cp $DIR/etc/rc.d/init.d/keepalived  /etc/rc.d/init.d/

# cp $DIR/etc/sysconfig/keepalived /etc/sysconfig/ && mkdir -p 

             /etc/keepalived

# cp $DIR/sbin/keepalived /usr/sbin/

3)为keepalived提供配置文件

# vim /etc/keepalived/keepalived.conf

! Configuration File for keepalived

global_defs {

#定义出现故障向何处发邮件

  notification_email {

 2663154088@qq.com

  }

#定义邮件是由谁发的

  notification_email_from root@localhost

  smtp_server 127.0.0.1

  smtp_connect_timeout 30

  router_id LVS_DEVEL

}

#定义检测脚本(为了完成主从节点的切换)

vrrp_script chk_schedown {

script "[ -e /etc/keepalived/down ] && exit 1 || exit 0"

interval 1

weight -5

fail 2

rise 1

}


# VIP1  

#用来定义虚拟路由(vrrp实例)

vrrp_instance VI_1 {

state MASTER

#定义通告信息基于那个接口发送和虚拟路由是工作在那个接口上的    

interface eth0

  # lvs_sync_daemon_inteface eth0  

virtual_router_id 51

#定义优先级  

priority 101

#定义每隔多长时间发一次通告

advert_int 5

#定义认证

authentication {

#定义认证类型为简单字符认证 

auth_type PASS

auth_pass keepalivedpass

}

#定义虚拟地址  

virtual_ipaddress {

202.207.178.4/16 dev eth0 label eth0:0

}

#定义自己写的脚本何时执行  

track_script {

chk_schedown

}

}

virtual_server 202.207.178.4 80 {

delay_loop 6

lb_algo rr

lb_kind DR

nat_mask 255.255.255.0

protocal TCP

sorry_server 127.0.0.1 80

real_server 202.207.178.8 80 {

weight 1

HTTP_GET {

url {

 path /

 status_code 200

}

connect_timeout 2

nb_get_retry 3

delay_before_retry 1

}

}

real_server 202.207.178.9 80 {

weight 1

HTTP_GET {

url {

 path /

 status_code 200

}

connect_timeout 2

nb_get_retry 3

delay_before_retry 1

}

}

}


4)启动服务

# /etc/init.d/keepalived restart

# ps -ef | grep keepalived

此时发现服务已经启动!

# tail -fn 100 /var/log/messages

此时发下一直滚屏,是缺少一个模块,下面加载此模块

# modprobe ip_vs

# /etc/init.d/keepalived restart

# tail -fn 100 /var/log/messages

此时一切正常

Director2:

配置同主节点,只是在配置文件中修改以下几项即可:

priority 100

real_server 202.207.178.9 80

测试:此时访问http://202.207.178.4/,可以发现以轮询方式访问到后端RS;在/etc/keepalived下touch一个名为down的文件,即可实现主从节点的切换!

三、自写脚本,实现DR宕机,向管理员发邮件(在主从节点上同时执行)

# cd /etc/keepalived/

# vim notify.sh

添加如下内容:

#!/bin/bash

#

contact=‘root@localhost‘


Usage(){

 echo "Usage: `basename $0` {master|backup|fault} VIP"

}

Notify(){

 subject="`hostname`‘s state changed to $1"

 mailbody="`data "+%F %T "`: `hostname`‘s state change to $1, $VIP floating."

 echo $mailbody | mail -s "$subject" $contact

}

[ $# -lt 2 ] && Usage &&  exit


VIP=$2


case $1 in

master)

  Notify master

  ;;

backup)

  Notify backup

  ;;

fault)

  Notify fault

  ;;

*)

  Usage

  exit 1

  ;;

esac

# chmod +x notify.sh

# vim keepalived.conf

在vrrp段添加如下内容:

notify_master "/etc/keepalived/notify.sh master 202.207.178.4"

notify_backup "/etc/keepalived/notify.sh backup 202.207.178.4"

notify_fault "/etc/keepalived/notify.sh fault 202.207.178.4"

此时在两个节点重启keepalived服务,实现主从节点切换,即可收到邮件!


                               欢迎批评指正!


本文出自 “10917734” 博客,请务必保留此出处http://10927734.blog.51cto.com/10917734/1881062

keepalived实现LVS高可用